无卤含硅阻燃环氧树脂制备与性能研究

合成了一种新型的含硅环氧单体-二缩水甘油基二甲基硅烷(DGDMS),将其以一定比例加入到普通商用环氧树脂(DER332)中,使用固化剂4,4'-二氨基二苯砜(DDS)共固化制得无卤含硅阻燃环氧树脂,研究探讨该阻燃环氧树脂的性能。结果表明:随着DGDMS含量的增加,空气和氮气中成炭率(700℃)相应得到提高,同时,氧指数由25.5上升至38.0,证明了在环氧树脂分子链中引入DGDMS可大大提高其阻燃性能

影响中晚期肝细胞肝癌手术切除预后的多因素分析

探讨影响中晚期肝细胞肝癌手术切除预后的因素。方法对130例中晚期大肝癌随访1～7年,采用单因素、多因素分析统计不同预后因素对患者生存率的影响。结果手术后1,3 ,5年生存率分别81.7%,24.3%,18.4%。单因素分析提示影响预后的因素为肝癌大小、是否早期复发、肝硬化情况、输血量;多因素分析提示肝癌大小、肿瘤早期复发是影响肝癌术后的预后因素。结论：中晚期肝癌手术切除预后仍不理想,重视围手术期处理,预防术后早期复发有望提高手术疗效 [英文摘要]Objective To study the prognostic factors in patients who received hepatectomy for large hepatocellular carcinoma(HCC). Methods 130 patients operated for large HCC were followed up for 1～7 years. Twenty possible factors were analyzed by Kaplan-Meier Log rank estimate. A multivariative survival analysis of these individal variable was undertaken using the cumulative survival rate by the computers COX proportional hazard. Result The overall cumulative survival rate at 1,3,5 years was 81.7%,24.3%,18.4% re..

ST段抬高型急性心肌梗死院前溶栓治疗中国专家共识

急性心肌梗死仍然严重威胁我国人民健康,在我国广大城乡地区,形势更为严峻[1,2]。及时救治急性心肌梗死患者,降低死亡率和保护心脏功能刻不容缓。鉴于我国的实际情况,院前溶栓治疗在大城市以外的城乡地区具有重要意义。为此,中国医师协会胸痛专业委员会及中国医学救援协会心血管急救分会专门组织有关专家制订了本共识,旨在帮助院前医疗急救人员对急性心肌梗死患者选择最佳

福建外来船舶压舱水中浮游植物种类组成与丰度及其影响因素的初步研究

2006~2008年间对进入福建沿海4个主要港口的12艘国际航船所携带的压舱水进行浮游植物种类组成和丰度分布的调查.此调查共检测出浮游植物7个门86属239种(含变种和变型),77μm孔径网滤样和20μm孔径网滤样的平均藻类丰度分别为1.2×102cells/dm3(变动在0~9.1×102cells/dm3间)和3.4×103cells/dm3(变动在0~3.0×104cells/dm3间).同时对其中6艘船舶的压舱水样品用f/2培养基培养,共有13种硅藻和1种甲藻被成功培养.文中还分析了压舱水中浮游植物丰度与盐度、水龄的关系,并结合历史资料讨论了压舱水里各类浮游植物的分布

中国东南沿海港口外轮压舱水生物的调查

随机选取东南沿海港口的17艘外来船舶(含8条集装箱船和9条散货船)作为监测对象,进行压舱水浮游植物及动物的物种鉴定和丰度测定,并对监测数据进行统计学分析。检出分属于7个浮游植物门类和5个动物门类的309种外来压舱水生物(包括60种赤潮生物)。外轮压舱水生物的分布及生存状态与水样的水龄和盐度相关。船舶压舱水排放是大家熟知的外来水生生物入侵的主要媒介。本调查结果表明,中国东南沿海外来散货船的压舱水排放所具的潜在生物入侵风险比集装箱船更应受关注

Experimental study on reperfusion of intraocular lens

作者简介: 祁明信, 男, 1945 年7 月 出生, 教授、主任医师、博士研究生 导师, 主要从事白内障的基础与临 床研究。联系电话: 0591-83570887; E-mail:qihuang@netease. com 通讯作者: 黄秀榕,E-mail:[email protected][中文文摘]目的开展晶状体再灌注的离体和动物实验研究,并对再灌注人工晶状体技术进行评价。方法采用新鲜离体幼兔眼、离体猪眼、新西兰白兔眼,应用自行研制的人工晶状体材料,进行以下实验:(1)体外固化实验;(2)晶状体前囊膜微型撕囊及其稳固性实验;(3)经微型前囊膜开口超声乳化吸出晶状体内容物实验;(4)活的新西兰白兔眼内人工晶状体再灌注实验。结果(1)按硅酮聚合物与固化剂50:1的比例可获得柔软、弹性好、固化时间短(完全固化时间为60min)的注入材料;(2)晶状体前囊膜1.8～2.0mm的连续环形撕囊口具有较好的稳定性,可经该微型开口吸出晶状体内容物并灌注材料;(3)超声能量18%、流量25mL·min-1、负压120mmHg(1kPa=7.5mmHg)为晶状体内容物经微型前囊膜开口吸出的最佳条件;(4)注入灌注材料后可形成由晶状体囊膜包裹的、置换原晶状体皮质和核的、新的再灌注人工晶状体。结论采用再灌注人工晶状体的方法可进行新型人工晶状体再灌注,可为治疗白内障和老视提供参考。[英文文摘]Objective To carry out the experimental study on reperfusion of intraocular lens(IOLs) in vitro or in animal,and to assess the technique of IOLs reperfusion.Methods The following experiments were performed by using self-developed materials in fresh rabbit eyes and pig eyes in vitro,as well as in eyes of alive New-Zea-land rabbits:(1)Solidification study of self-developed material in vitro;(2)Continuous circular capsulorhexis(CCC) in anterior capsule of lens and its stability;(3)Draw of lens contents via phaco through mini-CCC;(4)IOLs ref illing in the eyes of alive New-Zea land rabbits. Results(1) Thematerialwhich was soft, springy and short-term solidification(full solidification time was 60 minutes) were obtained in certain proportion of geland solidified agent(50:1) in vitro; ( 2)The CCC in anterior capsule of lens with 1.8-2.0 mm diameter had very good stability. The lens contents were drawn and the materialwere refilled through themini-CCC; (3) The best conditions of drawing out lens contents through m ini-CCC were phaco energy 18% , flow 25 mL·min- 1, and negative pressure 120 mmH g (1kPa=7.5 mmHg);(4) The new refilled IOLs, which were wrapped by capsule of lens and were replaced original cortex and nucleus of lens, were obtained after thematerial refillied. Conc lusion. New IOLs are refilled through this method, which can prov ide reference for the treatment of cataract and presbyopia.福建省科技三项费用;教育厅重点资助项目基金资助(编号:K98041

基于时域同步平均与分离技术的齿轮箱振动信号混沌特性验证

通过对齿轮箱正常状态以及不同程度齿轮断齿故障振动信号进行分析,采用时域同步平均技术（Time synchronous averaging method,TSA）对振动信号进行预处理,而后分离信号中的非线性部分,并进行混沌特性验证。结果表明,该方法能够有效提取反映齿轮箱退化的混沌特性,证明了混沌现象普遍存在于齿轮箱运行的全过程中

Design of LED Light Source converted to Linear Light Source for LCD Back light Module

By forming two type of semicircular holes with radius 0.6mm and 2.2mm respectively into the light guide plate of liquid crystal display backlight module, a light expansion area is designed. Through the light expansion area, the LED point light source can be transferred to linear light source of cold fluorescent lamp (CCFL) approximately. The intensity distribution of light emitted from LED when it passes through the light expansion area is simulated by TRACEPRO and the results show that the uniformity of light intensity distribution of LED through light expansion area can reach 0.88

THE MODEL ANALYSIS OF STRAIN TRANSFER IN THE APPLICATION OF PIEZOELECTRIC ACTUATORS

随着压电材料结构在航空航天结构控制领域的广泛应用, 压电驱动器与主体结构间的应变传递问题的研究日益重要. 该文首先对压电驱动器应用中的应变传递模型----均匀应变模型与Bernoulli-Euler模型进行了优缺点的分析对比; 其次将Bernoulli-Euler模型用于考虑胶层影响情况, 考虑到压电驱动器在航空航天领域的应用, 着重类似于翼面结构的模型分析, 得到了实际应用中压电驱动器沿结构厚度方向的应变传递表达式; 最后通过数值计算的方法确定了所得应变表达式适用的胶粘剂弹性模量及厚度的范围. 结果表明此表达式的有效性, 使 Bernoulli-Euler模型的应用更接近于实际情况, 同时为智能结构实际应变分布的分析提供了一定的依据与基