365 research outputs found
Estimating frame score from hip height and age
Frame score is a convenient way of describing the skeletal size of cattle. With adequate height growth curves most animals should maintain the same frame score throughout their life, while their actual height increases with age. Environmental factors can alter the normal skeletal growth rate. Nutrition level is a major factor. Cattle fed less than adequate nutrition will growth slower than the tables indicate, while cattle fed extremely high levels will growth faster. Large framed cattle grow faster and for a longer time than small framed cattle. Bulls grow faster than heifers. The accompanying tables and equations are currently the best estimates of cattle height growth rate and have been accepted be the Beef Improvement Federation
Veterinary technology graduates\u27 perception of preparedness and utilization in the workforce
This is a descriptive study to determine the perceptions of the Associate of Applied Science graduates of the Veterinary Technology program at the College of Southern Nevada on their preparedness for and utilization in the veterinary workforce. These graduates complete an accredited program which follows the guidelines on the essential and recommended skills list identified and approved by the American Veterinary Medical Association\u27s Committee on Veterinary Technician Education and Activities (AVMA/CVTEA); This study allowed the researcher to review the current curriculum at the College of Southern Nevada by reporting data from annual graduate follow-up surveys to confirm the curriculum complements the essential skills list. This study not only evaluated the perception of workforce utilization of program graduates, but the perception of educational preparedness and hands-on skill sets. Results indicate that program graduates feel they are utilized in and prepared for the veterinary workforce; however the numbers are too small to generalize to other AVMA accredited programs
Visual body condition score of cows
Condition scores are often used to describe the fleshiness of cows. These scores range from 1 (extremely emaciated) to 9 (extremely fat)
Estimates of heritabilities and genetic correlations in polled Hereford cattle selected for feed conversion
Performance records of 1459 Polled Hereford
cattle were analyzed to estimate heritabilities
and genetic correlations of beef cattle traits
from birth to maturity. Estimates of heritability
(h2) for birth weight (BWT), weaning weight
(WWT), yearling weight (YWT), scrotal circumference
(SC), yearling height (YHT), mature
height (MHT), and mature weight (MWT) were
moderate to high, with the exception of WWT
(h2 = .14), and ranged from .38 to .72. The
traits associated with feed conversion, daily feed
intake (INT), average daily gain (ADG), and
feed conversion (CONV) had heritabilities of
.24, .25, and .14, respectively. Genetic correlations
(rg) between the growth traits (BWT,
WWT, YWT, YHT, MHT, MWT, and SC)
were positive and ranged from .20 to .88. The
rg=.99 between milk production (MILK) and
maternal weaning weight (MWW) indicates that
the traits are essentially the same and supports
the method in which many breed associations
calculate and report expected progeny differences
(EPDs) for milk production. The rg = .42
between ADG and INT, rg = .27 between INT
and CONV, and the rg = -.82 between ADG
and CONV suggest that faster gaining cattle
have greater feed intakes and are more efficient
MF1082
Robert R. Schalles & Keith O. Zoellner, Using EPDs in a commercial herd, Kansas State University, September 1993
Yearling scrotal circumference prediction equation and age adjustment factors for various breeds of beef bulls
Scrotal circumference measurements and
other data were collected on 4,218 Angus, Red
Angus, Brangus, Charolais , Gelbvieh, Hereford,
Polled Hereford, Limousine, Salers, and
Simmental bulls born in the spring of 1991. All
were participants in selected on-farm and
central bull tests. Our objectives for the study
were to develop 205-and 365-day age-adjustment
factors for scrotal circumference and
derive a 365-day scrotal circumference prediction
equation based on adjusted 205-day
scrotal circumference. We determined that a
205-day scrotal circumference of approximately
21 cm is necessary to reach 32 cm at 1 year.
Age-of-dam adjustment factor for 205-day
scrotal circumference is +.8 cm for 2- and 3-
year-old dams. The factor for 365-day circumference
is +.6 cm for 2-year-old dams
Flushing cows
Starting to flush cows 95 days before the breeding season began significantly increase conception rate and required less total feed
Effects of various uterine treatments on calving-to-conception interval
Cows were given intrauterine infusions of enzymes, antibacterials, bacteria, or a combination of enzymes and antibacterials after calving to study basic changes in the post-partum uterus and effect on rebreeding. The group given nitrofurazone, an antibacterial compound, had the highest conception rate; however, calving-to-conception interval was lengthened. Combining proteolytic enzymes with the nitrofurazone gave an intercal to conception similar to that of control cows. Nitrofurazone caused this uterine lining to erode. Combining enzymes with nitrofurazone prevented some of the erosion. Innoculating the uterus with bacteria (Lactobacillus acidophilus) after calving did not affect the calving-to-conception interval
Dreifach-Fixpunktstrahler zur Kalibrierung von Strahlungsthermometern
Hochgenaue Kalibrierungen von Strahlungsthermometern auf Basis
der Internationalen TemperaturskalaITS-90 werden mittels
Einzel-Fixpunktstrahlern realisiert. Dabei werden mindestens drei dieser
Strahler mit unterschiedlichen Referenztemperaturen benötigt, um die
gewöhnlich nichtlineare Kennlinie von Strahlungsthermometern zu bestimmen.
Jeder dieser Strahler ist dabei in einen separaten Messaufbau bestehend aus
einem Rohrofen mit Wärmerohr und Regeleinrichtung zur homogenen
Temperierung, einer temperierten Blendenanordungund Positioniereinrichtung
eines Strahlungsthermometers integriert, wodurch ein erheblicher
gerätetechnischer Aufwand bei einer Dreipunkt-Kalibrierung entsteht. Um
diesen zu minimieren und zusätzlich den Justageaufwand für die Ausrichtung
eines Strahlungsthermometers und die Dauer einer solchen Kalibrierung zu
reduzieren, wurde ein Dreifach-Fixpunktstrahler (DFS) für Kalibrierungen im
Temperaturbereich von 200 °C bis 700 °C entwickelt,der drei
unterschiedliche Fixpunktsubstanzen in einer Zellen-Bauform enthält. An ihm
kann ein Strahlungsthermometer die Temperaturen der drei Liquidus- und
Solidusvorgänge dieser Fixpunktsubstanzen nach einmaliger Justage und in
einem einzigen Aufheiz und Abkühlvorgang messen und an ihnen kalibriert
werden.Zu Beginn der Entwicklung wurden für den DFS als geeignetste
Fixpunktsubstanzen Aluminium(Erstarrungstemperatur 660,323 °C), Zink
(419,527 °C) und Zinn (231,928 °C) und als das unter thermisch-mechanischen
Gesichtspunkten geeignetste Zellenkörpermaterial dieAluminiumoxidkeramik
C799 ausgewählt. Auf Grundlage dieser Materialauswahl erfolgte danach die
optimale Dimensionierung der Bauform. Dazu wurden zunächst
FEM-Berechnungen zur Grundanordnung der Fixpunktmaterialkammern und danach
optimierende Berechnungen zur Dimensionierung dieser koaxialen,
radialsymmetrischen Grundbauform durchgeführt. Deren Ziel war es, deutlich
ausgeprägte Phasenumwandlungsvorgänge mit metrologisch gut auswertbaren
Temperaturplateaus im Strahlerinneren und damit eine geringe Unsicherheit
der Temperaturdarstellung zur erreichen. Die Berechnungen begleitend
wurded diese Bauform schrittweise aufgebaut und Untersuchungen zu ihrer
mechanischen Belastbarkeitund metrologischen Qualität durchgeführt. Nach
erfolgreichen Tests des DFS wurden zwei unterschiedlich befüllte Varianten
des DFS hergestellt.Da bei Emissionsgradmessungen ein zu geringer
spektraler Wandemissionsgrad der verwendeten Aluminiumoxidkeramik
festgestellt wurde, erfolgte eine zusätzliche Beschichtung des
Strahlerhohlraumes mit Hochtemperatur-Emissionsgradlack. Der daraus
resultierende deutlich höhere effektive Hohlraumemissionsgrad des Strahlers
wurde in Berechnungen nach der Monte-Carlo-Methode zu 0,99987 bestimmt.Die
Fixpunkttemperaturverläufe des DFS wurden mit einem
Transfer-Strahlungsthermometer vermessen und in einer umfangreichen
Messunsicherheitsbetrachtung die Fixpunkttemperaturendes DFS ermittelt.
Dabei wurden unter anderem Einflüsse auf die
Phasenumwandlungstemperatur selbst, aber auch Emissionsgradeffekte des
Strahlerhohlraumes oder Wärmetransportvorgänge im DFS berücksichtigt. Es
konnte nachgewiesen werden, dass die Unsicherheiten der
DFS-Fixpunkttemperaturen im Bereich von 30mK bis 90mK liegen und damit Werte
vergleichbarer Einzel-Fixpunktstrahler erreichen
Managing fast- vs. slow-growth genotypes to optimize quality and yield grades
Fast-growth genotype steers placed on a high energy ration a month after weaning were compared to a slow-growth genotype on a growing ration for 155 days, followed by a finishing ration for 62 days. The fast-growth genotype produced heavier, higher quality carcasses in less time than the slow-growth genotype, with similar energy conversion. Using contemporary prices. the fast-growth genotype cattle broke even, and the slow-growth genotype lost $124 per head
- …