99 research outputs found

    Optical and RF Metrology for 5G

    Full text link
    Specification standards will soon be available for 5G mobile RF communications. What optical and electrical metrology is needed or available to support the development of the supporting optical communication systems? Device measurement, digital oscilloscope impairments and improving system resolution are discussed.Comment: 2017 IEEE Photonics Society Summer Topical Meeting Series (SUM

    Robust single polarization coherent transceiver using DGD pre-distortion for optical access networks

    Get PDF
    DGD pre-distortion implements a polarization time code enabling a single polarization coherent transceiver to recover the signal for all polarization states. Using a DFE the maximum polarization dependent sensitivity variation is 1.9/3.0dB for BPSK/QPSK respectively

    Mask testing of 28 gbaud 16-QAM transmitters using time-resolved error vector magnitude

    Get PDF
    We propose time-resolved EVM for characterization of 16-QAM transmitters. By designing a mask test, different impairments can be separated and quantified. The impact from quadrature error and timing skew are investigated experimentally

    Spectrally-efficient high-speed wireless bridge operating at 250 GHz

    Get PDF
    A photonic wireless bridge operating at 250 GHz is presented. Using a pilot tone-assisted phase noise compensation technique, a data rate of 40 Gbit/s is achieved using 16-quadrature amplitude modulation. Furthermore, the wireless bridge is also demonstrated in a wavelength division multiplexing scenario

    Pilot-tone assisted 16-QAM photonic wireless bridge operating at 250 GHz

    Get PDF
    A photonic wireless bridge operating at a carrier frequency of 250 GHz is proposed and demonstrated. To mitigate the phase noise of the free-running lasers present in such a link, the tone-assisted carrier recovery is used. Compared to the blind phase noise compensation (PNC) algorithm, this technique exhibited penalties of 0.15 dB and 0.46 dB when used with aggregated Lorentzian linewidths of 28 kHz and 359 kHz, respectively, and 20 GBd 16-quadrature amplitude modulation (QAM) signals. The wireless bridge is also demonstrated in a wavelength division multiplexing (WDM) scenario, where 5 optical channels are generated and sent to the Tx remote antenna unit (RAU). In this configuration, the full band from 224 GHz to 294 GHz is used. Finally, a 50 Gbit/s transmission is achieved with the proposed wireless bridge in single channel configuration. The wireless transmission distance is limited to 10 cm due to the low power emitted by the uni-travelling carrier photodiode used in the experiments. However, link budget calculations based on state-of-the-art THz technology show that distances >1000 m can be achieved with this approach.Comment: 13 pages, in Journal of Lightwave Technolog

    Analytical BER performance in differential n-PSK coherent transmission system influenced by equalization enhanced phase noise

    Get PDF
    Long-haul high speed optical transmission systems are significantly distorted by the interplay between the electronic chromatic dispersion (CD) equalization and the local oscillator (LO) laser phase noise, which leads to an effect of equalization enhanced phase noise (EEPN). The EEPN degrades the performance of optical communication systems severely with the increment of fiber dispersion, LO laser linewidth, symbol rate, and modulation format. In this paper, we present an analytical model for evaluating the performance of bit-error-rate (BER) versus signal-to-noise ratio (SNR) in the n-level phase shift keying (n-PSK) coherent transmission system employing differential carrier phase estimation (CPE), where the influence of EEPN is considered. Theoretical results based on this model have been investigated for the differential quadrature phase shift keying (DQPSK), the differential 8-PSK (D8PSK), and the differential 16-PSK (D16PSK) coherent transmission systems. The influence of EEPN on the BER performance in term of the fiber dispersion, the LO phase noise, the symbol rate, and the modulation format are analyzed in detail. The BER behaviors based on this analytical model achieve a good agreement with previously reported BER floors influenced by EEPN. Further simulations have also been carried out in the differential CPE considering EEPN. The results indicate that this analytical model can give an accurate prediction for the DQPSK system, and a leading-order approximation for the D8PSK and the D16PSK systems

    Single sideband signals for phase noise mitigation in wireless THz-over-fibre systems

    Get PDF
    In future photonic-based THz backhaul links, integrating the optical local oscillator (LO) in a remote antenna unit can be beneficial in terms of optical bandwidth efficiency and higher compatibility with passive optical networks. In such a scenario, two approaches can be used to reduce the high phase noise associated with free-running lasers: 1) baseband (BB) signals & carrier recovery, and 2) single sideband (SSB) signals & envelope detection. In this paper, we compare the performance of the two approaches for various optical LO linewidths using 5 GBd 16-QAM signals. We find that, for a total linewidth wider than 0.55 MHz, the SSB approach yields better results. The superior performance, however, comes at the expense of reducing the net information spectral density (ISD) of the SSB signal by 39% compared to that of the BB signal. However, using signal–signal beat interference-mitigation algorithms, an ISD only 15% lower than the BB signal ISD was sufficient to meet the FEC requirement. Given these results, we believe that the envelope detection of SSB signals is a promising solution to mitigate the phase noise problem of THz links based on free-running lasers, without excessively compromising the spectral efficiency of the system

    Study of EEPN mitigation using modified RF pilot and Viterbi-Viterbi based phase noise compensation

    Get PDF
    We propose - as a modification of the optical (RF) pilot scheme -a balanced phase modulation between two polarizations of the optical signal in order to generate correlated equalization enhanced phase noise (EEPN) contributions in the two polarizations. The method is applicable for n-level PSK system. The EEPN can be compensated, the carrier phase extracted and the nPSK signal regenerated by complex conjugation and multiplication in the receiver. The method is tested by system simulations in a single channel QPSK system at 56 Gb/s system rate. It is found that the conjugation and multiplication scheme in the Rx can mitigate the EEPN to within 1/2 orders of magnitude. Results are compared to using the Viterbi-Viterbi algorithm to mitigate the EEPN. The latter method improves the sensitivity more than two orders of magnitude. Important novel insight into the statistical properties of EEPN is identified and discussed in the paper
    • …
    corecore