Hip fracture patients in geriatric rehabilitation show poor nutritional status, dietary intake and muscle health

Contains fulltext : 226230.pdf (publisher's version ) (Open Access

Hip fracture patients in geriatric rehabilitation show poor nutritional status, dietary intake and muscle health

The aim of this study was to gain insight into the nutritional status, dietary intake and muscle health of older Dutch hip fracture patients to prevent recurrent fractures and to underpin rehabilitation programs. This cross-sectional study enrolled 40 hip fracture patients (mean ± SD age 82 ± 8.0 years) from geriatric rehabilitation wards of two nursing homes in the Netherlands. Assessments included nutritional status (Mini Nutritional Assessment), dietary intake on three non-consecutive days which were compared with Dietary Reference Intake values, and handgrip strength. Muscle mass was measured using Bioelectrical Impedance Analysis and ultrasound scans of the rectus femoris. Malnutrition or risk of malnutrition was present in 73% of participants. Mean energy, protein, fibre and polyunsaturated fat intakes were significantly below the recommendations, while saturated fat was significantly above the UL. Protein intake wa

Differential Expression of Adenosine A(3) Receptors Controls Adenosine A(2A) Receptor-Mediated Inhibition of TLR Responses in Microglia

Microglia activation is a prominent feature in many neuroinflammatory disorders. Unrestrained activation can generate a chronic inflammatory environment that might lead to neurodegeneration and autoimmunity. Extracellular adenosine modulates cellular activation through adenosine receptor (ADORA)-mediated signaling. There are four ADORA subtypes that can either increase (A(2A) and A(2B) receptors) or decrease (A(1) and A(3) receptors) intracellular cyclic AMP levels. The expression pattern of the subtypes thus orchestrates the cellular response to extracellular adenosine. We have investigated the expression of ADORA subtypes in unstimulated and TLR-activated primary rhesus monkey microglia. Activation induced an up-regulation of A(2A) and a down-regulation of A(3) receptor (A(3)R) levels. The altered ADORA-expression pattern sensitized microglia to A(2A) receptor (A(2A)R)-mediated inhibition of subsequent TLR-induced cytokine responses. By using combinations of subtype-specific agonists and antagonists, we revealed that in unstimulated microglia, A(2A)R-mediated inhibitory signaling was effectively counteracted by A(3)R-mediated signaling. In activated microglia, the decrease in A(3)R-mediated signaling sensitized them to A(2A)R-mediated inhibitory signaling. We report a differential, activation state-specific expression of ADORA in microglia and uncover a role for A(3)R as dynamically regulated suppressors of A(2A)R-mediated inhibition of TLR-induced responses. This would suggest exploration of combinations of A(2A)R agonists and A(3)R antagonists to dampen microglial activation during chronic neuroinflammatory conditions. The Journal of Immunology, 2009, 182: 7603-7612

Complementary integrated circuits on plastic foil using inkjet printed n- and p-type organic semiconductors: Fabrication, characterization, and circuit analysis

Complementary thin-film transistor circuits composed of 6,13-bis(triisopropyl-silylethynyl) pentacene (TIPS-PEN) and a rylene carboxylic diimide derivative for p- and n-channel thin-film transistors (TFTs) were fabricated on flexible foils. The so-called staggered TFT configuration is used, meaning that the semiconductors layers are deposited last. The work-function of the injecting gold electrodes were modified using several self-assembled monolayers (SAMs). For optimized contacts the mobility of the n- and p-channel TFTs was 0.5 cm 2/Vs and 0.2 cm 2/Vs, respectively. Strongly degraded performance is obtained when the n-channel material was printed on contacts optimized for the p-channel TFT, and vice versa. This illustrates that for CMOS circuits we need careful work-function engineering to allow proper injection for both electrons and holes. We show for the first time that by using a bimolecular mixture for the SAM we can systematically vary the work function, and demonstrate how this affects the performance of discrete n-type and p-type transistors, as well as CMOS inverters and ring oscillators. Under optimal processing conditions we realized complementary 19-stage ring oscillators with 10 μs stage delay operating at 20 V

Charge transport in high-performance ink-jet printed single-droplet organic transistors based on a silylethynyl substituted pentacene/insulating polymer blend

We present a systematic study of the influence of material composition and ink-jet processing conditions on the charge transport in bottom-gate field-effect transistors based on blends of 6,13-bis(triisopropyl-silylethynyl) pentacene (TIPS-PEN) and polystyrene. After careful process optimizations of blending ratio and printing temperature we routinely can make transistors with an average mobility of 1 cm(2)/Vs (maximum value 1.5 cm(2)/Vs), on/off ratio exceeding 10(7), and sharp turn-on in current (sub-threshold slopes approaching 60 mV/decade). These characteristics are superior to the TIPS-PEN only transistors. Using channel scaling measurements and scanning Kelvin probe microscopy, the sharp turn-on in current in the blends is attributed to a contact resistance that originates from a thin insulating layer between the injecting contacts and the semiconductor channel. (C) 2011 Elsevier B.V. All rights reserved.status: publishe

Charge transport in high-performance ink-jet printed single-droplet organic transistors based on a silylethynyl substituted pentacene/insulating polymer blend

We present a systematic study of the influence of material composition and ink-jet processing conditions on the charge transport in bottom-gate field-effect transistors based on blends of 6,13-bis(triisopropyl-silylethynyl) pentacene (TIPS-PEN) and polystyrene. After careful process optimizations of blending ratio and printing temperature we routinely can make transistors with an average mobility of 1 cm2/Vs (maximum value 1.5 cm2/Vs), on/off ratio exceeding 10^7, and sharp turn-on in current (sub-threshold slopes approaching 60 mV/decade). These characteristics are superior to the TIPS-PEN only transistors. Using channel scaling measurements and scanning Kelvin probe microscopy, the sharp turn-on in current in the blends is attributed to a contact resistance that originates from a thin insulating layer between the injecting contacts and the semiconductor channel.

Evaluation of eluforsen, a novel RNA oligonucleotide for restoration of CFTR function in in vitro and murine models of p.Phe508del cystic fibrosis.

Cystic fibrosis (CF) is caused by mutations in the gene encoding the epithelial chloride channel CF transmembrane conductance regulator (CFTR) protein. The most common mutation is a deletion of three nucleotides leading to the loss of phenylalanine at position 508 (p.Phe508del) in the protein. This study evaluates eluforsen, a novel, single-stranded, 33-nucleotide antisense oligonucleotide designed to restore CFTR function, in in vitro and in vivo models of p.Phe508del CF. The aims of the study were to demonstrate cellular uptake of eluforsen, and its efficacy in functional restoration of p.Phe508del-CFTR both in vitro and in vivo. In vitro, the effect of eluforsen was investigated in human CF pancreatic adenocarcinoma cells and human bronchial epithelial cells. Two mouse models were used to evaluate eluforsen in vivo. In vitro, eluforsen improved chloride efflux in CF pancreatic adenocarcinoma cell cultures and increased short-circuit current in primary human bronchial epithelial cells, both indicating restoration of CFTR function. In vivo, eluforsen was taken up by airway epithelium following oro-tracheal administration in mice, resulting in systemic exposure of eluforsen. In female F508del-CFTR mice, eluforsen significantly increased CFTR-mediated saliva secretion (used as a measure of CFTR function, equivalent to the sweat test in humans). Similarly, intranasal administration of eluforsen significantly improved nasal potential difference (NPD), and therefore CFTR conductance, in two CF mouse models. These findings indicate that eluforsen improved CFTR function in cell and animal models of p.Phe508del-CFTR-mediated CF and supported further development of eluforsen in human clinical trials, where eluforsen has also been shown to improve CFTR activity as measured by NPD

Complementary integrated circuits on plastic foil using inkjet printed n- and p-type organic semiconductors:Fabrication, characterization, and circuit analysis

\u3cp\u3eComplementary thin-film transistor circuits composed of 6,13-bis(triisopropyl-silylethynyl) pentacene (TIPS-PEN) and a rylene carboxylic diimide derivative for p- and n-channel thin-film transistors (TFTs) were fabricated on flexible foils. The so-called staggered TFT configuration is used, meaning that the semiconductors layers are deposited last. The work-function of the injecting gold electrodes were modified using several self-assembled monolayers (SAMs). For optimized contacts the mobility of the n- and p-channel TFTs was 0.5 cm \u3csup\u3e2\u3c/sup\u3e/Vs and 0.2 cm \u3csup\u3e2\u3c/sup\u3e/Vs, respectively. Strongly degraded performance is obtained when the n-channel material was printed on contacts optimized for the p-channel TFT, and vice versa. This illustrates that for CMOS circuits we need careful work-function engineering to allow proper injection for both electrons and holes. We show for the first time that by using a bimolecular mixture for the SAM we can systematically vary the work function, and demonstrate how this affects the performance of discrete n-type and p-type transistors, as well as CMOS inverters and ring oscillators. Under optimal processing conditions we realized complementary 19-stage ring oscillators with 10 μs stage delay operating at 20 V.\u3c/p\u3

Controlled deposition of highly ordered soluble acene thin films:Effect of morphology and crystal orientation on transistor performance

\u3cp\u3e(Figure Presented) Controlling the morphology of soluble small molecule organic semiconductors is crucial for the application of such materials in electronic devices. Using a simple dip-coating process we systematically vary the film drying speed to produce a range of morphologies, including oriented needle-like crystals. Structural characterization as well as electrical transistor measurements show that intermediate drying velocities produce the most uniformly aligned films.\u3c/p\u3