5,117 research outputs found

    Use of Screen-printed Electrodes Modified by Prussian Blue and Analogues in Sensing of Cysteine

    Get PDF
    © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim The utilisation of screen-printing technology allows for a mass scalable approach for the production of electrochemical screen-printed electrodes (SPEs) and the presence of a redox mediator can add new possibilities to the electrochemical properties of the SPEs. Among the materials used as redox mediators, cyanidoferrates polymers can be used for electro-oxidation of cysteine. In this work, two monomers, namely, [Fe(CN) 6 ] 4− and [Fe(CN) 5 NH 3 ] 3− were used to produce Prussian blue (PB) and Prussian blue-Ammine (PB-Ammine), respectively. In addition, two modification methods were compared, firstly via a drop-casting and secondly by the incorporation of these materials into a printable ink. The SPE modified by PB-Ammine (drop-casting) exhibits the highest electroactive area, however the highest heterogeneous rate constant was found with the SPE modified by PB-Ammine that was incorporated into the ink. The highest value of the constant of electro-oxidation of cysteine and lowest limit of detection was also observed in the SPE modified by PB incorporated into the ink. These studies suggest that the electrocatalytic properties of SPE modified by PB and PB-Ammine are dependent upon the availability of Fe 3+ catalytic sites and the increased kinetics of the chemical reaction between the catalytic sites and the analyte

    Fatty Acid Profile and Bioactivity from Annona hypoglauca Seeds Oil

    Get PDF
    Plants from Annona (Annonaceae) genus are present in tropical regions, where they have economic and medicinal potential. Information on the fatty acids profile and bioactivity from seed oil of Annona species are incipient. The objective of this work was to investigate Annona hypoglauca seeds oil in terms of its yield, composition and biological activity (acetylcholinesterase enzyme inhibition, bactericidal and fungicidal activity). Fatty acids profiles were determined by Gas Chromatography equipped with Flame Ionization Detector. Oil yield reached about 15% and the major constituents detected were ω-9 oleic acid (42.65%) and ω-6 linoleic acid (29.63%). A. hypoglauca oil was potent for acetylcholinesterase inhibition (79.55%), and presented high and selective bioactivity against Candida albicans.Keywords: Annona hypoglauca, ω-9 Oleic Acid, ω-6 Linoleic Acid, Acetylcholinesterase, Candida albican

    Ni−Fe (Oxy)hydroxide Modified Graphene Additive Manufactured (3D-Printed) Electrochemical Platforms as an Efficient Electrocatalyst for the Oxygen Evolution Reaction

    Get PDF
    © 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim We demonstrate that polylactic acid (PLA)/graphene additive manufactured (3D-printed) electrodes (Gr/AMEs) electrodeposited with Ni−Fe (oxy)hydroxide can efficiently catalyse the oxygen evolution reaction (OER). X-ray photoelectron spectroscopy (XPS) depth profiling combined with Atomic Force Microscopy (AFM) and Tip Enhanced Raman Spectroscopy (TERS) deduced the composition and depth of the Ni−Fe (oxy)hydroxide layer. The composition of the resulting electrocatalytic surfaces are tailored through altering the concentrations of nickel and iron within the electrodeposited solutions, which give rise to optimised AMEs OER performance (within 0.1 M KOH). The optimal OER performance was observed from a Ni−Fe (oxy)hydroxide with a 10 % content of Fe, which displayed an OER onset potential and overpotential of+1.47 V (vs. RHE) and 519 mV, respectively. These values arecomparable to that of polycrystalline Iridium (+ 1.43 V (vs. RHE) and ca. 413 mV), as well as being significantly less electropositive than a bare/unmodified AME. This work is essential for those designing, fabricating and modulating additive manufactured electrodes

    AGRONOMIC AND MOLECULAR CHARACTERIZATION OF DIPLOID IMPROVED BANANA GENOTYPES

    Get PDF
    An investigation about the genetical diversity among eleven banana diploid genotypes using nine agronomical characteristics and sixteen microsatellite markers was implanted at Embrapa Cassava and Tropical Fruits. Cruz das Almas (BA), Brazil. The generalized distance of Mahalanobis indicated the presence of genetic diversity. The genotypes were grouped into tree clusters. Among the investigated characteristics, the plant height, number of bunch's, number of fruits per bunch and pseudostem exhibited high contribution towards genetic divergence. The average number of alleles per primer was 7.51, with a total of 120 alleles identified. The average similarity among the all diploid was 0.44, range from 0.29 up to 0.60. New parental combinations can be identified with base of the divergence between these diploids, contributing for development of new improved diploids preventing the narrow genetic base and creating new genetic variability for selection.31115416

    Effect of pre-heated dual-cured resin cements on the bond strength of indirect restorations to dentin

    Get PDF
    This study evaluated the effects of resin luting agents (LA) polymerized using increased temperature on the in vitro microtensile bond strength (mu TBS) of indirect restorations to dentin. The occlusal dentin surfaces of 40 human third molars were exposed and flattened. The teeth were assigned to 8 groups (n = 5) according to the LA temperature (25 degrees C or 50 degrees C), curing mode (dual- or self-curing mode), and product (Excite DSC/Variolink II [VII] and XP Bond/Calibra [Cal]). The bonding agents were applied to the dentin surfaces according to manufacturers' instructions. For preheated groups, the LAs were heated to 50 degrees C, subsequently mixed on a heated stirrer surface, and applied to the previously heated pre-polymerized resin discs (2 mm thickness, TPH-Spectrum). The discs were bonded to the dentin surfaces, and the LAs were either exposed to a curing light according to manufacturers' instructions or allowed to self-cure. Specimens were stored in relative humidity at 37 degrees C for 7 days. Specimens were mesio-distally and bucco-lingually sectioned to obtain multiple bonded beams with a 1-mm(2) cross-sectional area for mu TBS testing. Data (MPa) were analyzed by 2-way ANOVA and Tukey's post hoc test (alpha = 5%) for each product. Specimen failure patterns were analyzed using a scanning electron microscope. VII groups showed higher mu TBS at 50 degrees C than at 25 degrees C regardless of curing mode (p = 0.05). Cal groups showed similar mu TBS at 25 degrees C and 50 degrees C in all activation modes. The use of some dual-polymerizing LAs at 50 degrees C may improve the mu TBS of indirect restorations to dentin.26217017

    Targeting BTK for the treatment of FLT3-ITD mutated acute myeloid leukemia

    Get PDF
    Approximately 20% of patients with acute myeloid leukaemia (AML) have a mutation in FMS-like-tyrosine-kinase-3 (FLT3). FLT3 is a trans-membrane receptor with a tyrosine kinase domain which, when activated, initiates a cascade of phosphorylated proteins including the SRC family of kinases. Recently our group and others have shown that pharmacologic inhibition and genetic knockdown of Bruton's tyrosine kinase (BTK) blocks AML blast proliferation, leukaemic cell adhesion to bone marrow stromal cells as well as migration of AML blasts. The anti-proliferative effects of BTK inhibition in human AML are mediated via inhibition of downstream NF-κB pro-survival signalling however the upstream drivers of BTK activation in human AML have yet to be fully characterised. Here we place the FLT3-ITD upstream of BTK in AML and show that the BTK inhibitor ibrutinib inhibits the survival and proliferation of FLT3-ITD primary AML blasts and AML cell lines. Furthermore ibrutinib inhibits the activation of downstream kinases including MAPK, AKT and STAT5. In addition we show that BTK RNAi inhibits proliferation of FLT3-ITD AML cells. Finally we report that ibrutinib reverses the cyto-protective role of BMSC on FLT3-ITD AML survival. These results argue for the evaluation of ibrutinib in patients with FLT3-ITD mutated AML

    Dietary calcium and vitamin D intakes in childhood and throughout adulthood and mammographic density in a British birth cohort

    Get PDF
    We examined the role of dietary calcium and vitamin D intakes in childhood and throughout adulthood in relation to mammographic density using data from a nationally representative cohort of 1161 women followed up since their birth in 1946. Dietary intakes at the age of 4 years were determined by 24-h recalls and at the ages of 36, 43 and 53 years by 5-day food records. After adjusting for known risk factors and confounders, no evidence of a relationship between dietary calcium or vitamin D intakes and mammographic density approximately at the age of 50 years was found, except for a cross-sectional relationship between dietary calcium intake at the age of 53 years and breast density in women who were post-menopausal at the time of mammography, with those in the top fifth of the distribution of calcium intake having a 0.53 s.d. lower percent breast density than those in the lowest fifth (P-value <0.01 for linear trend)
    • …
    corecore