Fossil Groups in the Millennium Simulation. Evolution of the Brightest Galaxies

We create a catalogue of simulated fossil groups and study their properties, in particular the merging histories of their first-ranked galaxies. We compare the simulated fossil group properties with those of both simulated non-fossil and observed fossil groups. Using simulations and a mock galaxy catalogue, we searched for massive ($>$ 5 $\times$ 10$^{13} h^{-1} {\cal M}_\odot$) fossil groups in the Millennium Simulation Galaxy Catalogue. In addition, attempted to identify observed fossil groups in the Sloan Digital Sky Survey Data Release 6 using identical selection criteria. Our predictions on the basis of the simulation data are:(a) fossil groups comprise about 5.5% of the total population of groups/clusters with masses larger than 5 x 10$^{13} h^{-1} {\cal M}_\odot$. This fraction is consistent with the fraction of fossil groups identified in the SDSS, after all observational biases have been taken into account; (b) about 88% of the dominant central objects in fossil groups are elliptical galaxies that have a median R-band absolute magnitude of $\sim -23.5-5 log h$, which is typical of the observed fossil groups known in the literature; (c)first-ranked galaxies of systems with ${\cal M} >$ 5 x 10$^{13} h^{-1} {\cal M}_\odot$, regardless of whether they are either fossil or non-fossil, are mainly formed by gas-poor mergers; (d) although fossil groups, in general, assembled most of their virial masses at higher redshifts in comparison with non-fossil groups, first-ranked galaxies in fossil groups merged later, i.e. at lower redshifts, compared with their non-fossil-group counterparts. We therefore expect to observe a number of luminous galaxies in the centres of fossil groups that show signs of a recent major merger.Comment: 9 pages, 3 figures, accepted for publication in Astronomy & Astrophysic

Design of concrete-filled steel tubular columns under axial loading according to NBR 8800:2008 and Eurocode 4:2004: tests results and comparisons

São apresentados os resultados experimentais de 32 pilares mistos preenchidos de seção circular, submetidos à compressão axial, para os quais foi avaliada a influência dos seguintes parâmetros: resistência à compressão do concreto, relação comprimento/diâmetro (L/D) e espessura do tubo de aço (t). Os valores experimentais de força máxima foram comparados com aqueles resultantes da aplicação da formulação apresentada na NBR 8800:2008 e no EN 1994-1-1:2004 (Eurocode 4 - EC4), extrapolando-se os resultados para valores de resistência do concreto não previstos por essas normas. Os perfis de aço com relação comprimento/diâmetro (L/D) de 3, 5, 7 e 10 foram preenchidos com concretos de resistências à compressão de 30, 60, 80 e 100MPa. Os resultados da comparação entre valores de força última experimental e teórica mostraram que as normas avaliadas apresentam bons resultados. A NBR 8800 apresenta resultados conservadores ao passo que o EC4 apresenta, em média, valores de força resistente não conservadores. A correlação tende a piorar para concretos de resistência menor.In this paper results of tests on 32 concrete-filled steel tubular columns under axial load are reported. The test parameters were the concrete compressive strength, the column slenderness (L/D) and the wall thickness (t). The test results were compared with predictions from the codes NBR 8800:2008 and EN 1994-1-1:2004 (EC4). The columns were 3, 5, 7 and 10 length to diameter ratios (L/D) and were tested with 30MPa, 60MPa, 80MPa and 100MPa concrete compressive strengths. The results of ultimate strength predicted by codes showed good agreement with experimental results. The results of NBR 8800 code were the most conservative and the EC4 showed the best results, in mean, but it was not conservative for usual concrete-filled short columns.Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) - Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP

Tremor in Patients with Inflammatory Bowel Disease

The spectrum of neurological manifestations of Crohn’s disease (CD) and ulcerative colitis (UC) is diverse and not fully understood. In addition to peripheral neuropathy, mild autonomic impairment has been reported. These problems themselves could also result in secondary neurological consequences, such as the exacerbation of enhanced physiological tremor. Indeed, some patients in our cohort complained of tremor. Hence, we hypothesized that enhanced physiological tremor would be more severe in patients with inflammatory bowel disease (IBD) than controls

The Role of Ellis‐Van Creveld 2(EVC2) in Mice During Cranial Bone Development

EvC syndrome is a type of autosomal‐recessive chondrodysplasia. Previous case studies in patients suggest abnormal craniofacial development, in addition to dwarfism and tooth abnormalities. To investigate how craniofacial development is affected in EvC patients, surface models were generated from micro‐CT scans of control mice, Evc2 global mutant mice and Evc2 neural crest‐specific mutant mice. The anatomic landmarks were placed on the surface model to assess the morphological abnormalities in the Evc2 mutants. Through analyzing the linear and angular measurements between landmarks, we identified a smaller overall skull, shorter nasal bone, shorter frontal bone, and shorter cranial base in the Evc2 global mutants. By comparing neural crest‐specific Evc2 mutants with control mice, we demonstrated that the abnormalities within the mid‐facial regions are not accounted for by the Evc2 mutation within these regions. Additionally, we also identified disproportionate length to width ratios in the Evc2 mutants at all levels from anterior to posterior of the skull. Overall, this study demonstrates a more comprehensive analysis on the craniofacial morphological abnormalities in EvC syndrome and provides the developmental insight to appreciate the impact of Evc2 mutation within the neural crest cells on multiple aspects of skull deformities. Anat Rec, 2017. © 2017 Wiley Periodicals, Inc. Anat Rec, 301:46–55, 2018. © 2017 Wiley Periodicals, Inc.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/141635/1/ar23692_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/141635/2/ar23692.pd

Radiographic interpretation using high-resolution Cbct to diagnose degenerative temporomandibular joint disease

The objective of this study was to use high-resolution cone-beam computed images (hr-CBCT) to diagnose degenerative joint disease in asymptomatic and symptomatic subjects using the Diagnostic Criteria for Temporomandibular Disorders DC/TMD imaging criteria. This observational study comprised of 92 subjects age-sex matched and divided into two groups: clinical degenerative joint disease (c-DJD, n = 46) and asymptomatic control group (n = 46). Clinical assessment of the DJD and high-resolution CBCT images (isotropic voxel size of 0.08mm) of the temporomandibular joints were performed for each participant. An American Board of Oral and Maxillofacial Radiology certified radiologist and a maxillofacial radiologist used the DC/TMD imaging criteria to evaluate the radiographic findings, followed by a consensus of the radiographic evaluation. The two radiologists presented a high agreement (Cohen’s Kappa ranging from 0.80 to 0.87) for all radiographic findings (osteophyte, erosion, cysts, flattening, and sclerosis). Five patients from the c- DJD group did not present radiographic findings, being then classified as arthralgia. In the asymptomatic control group, 82.6% of the patients presented radiographic findings determinant of DJD and were then classified as osteoarthrosis or overdiagnosis. In conclusion, our results showed a high number of radiographic findings in the asymptomatic control group, and for this reason, we suggest that there is a need for additional imaging criteria to classify DJD properly in hr-CBCT images

Effectiveness of rotavirus vaccination against childhood diarrhoea in El Salvador: case-control study

Objective To evaluate the effectiveness of a monovalent rotavirus vaccine against severe rotavirus disease and to assess its impact on diarrhoea in children aged less than 2 years after national introduction in El Salvador, a low-middle income country in Central America

Calcium fortification of roasted and ground coffee with different calcium salts

This study determined the calcium content and sensory attributes of roast and ground coffee fortified with calcium carbonate, calcium citrate malate, and calcium phosphate. The beverages made from fortified coffee powder were compared with a control (unfortified beverage). Two experts in coffee sensory testing analyzed six samples of coffee with the addition of different calcium salts; they assessed the aroma, color, and characteristic flavor of traditional coffee. The formulations containing calcium carbonate (A), calcium citrate malate (B), and calcium phosphate (C) were selected and used to verify the effect of using paper and polyester to filter infusions. Formulation B had the greatest purchase intent and presented the highest calcium content in the beverage, and it was considered rich in this mineral. The daily habit of drinking a cup of coffee (50 mL) has been popularized inBrazil; therefore, the addition of calcium citrate malate into traditional coffee powder can be an excellent calcium source and ensure the healthy intake of this macro mineral

Changes of energy fluxes in marine animal forests of the Anthropocene: factors shaping the future seascape

Climate change is already transforming the seascapes of our oceans by changing the energy availability and the metabolic rates of the organisms. Among the ecosystem-engineering species that structure the seascape, marine animal forests (MAFs) are the most widespread. These habitats, mainly composed of suspension feeding organisms, provide structural complexity to the sea floor, analogous to terrestrial forests. Because primary and secondary productivity is responding to different impacts, in particular to the rapid ongoing environmental changes driven by climate change, this paper presents some directions about what could happen to different MAFs depending on these fast changes. Climate change could modify the resistance or resilience of MAFs, potentially making them more sensitive to impacts from anthropic activities (i.e. fisheries and coastal management), and vice versa, direct impacts may amplify climate change constraints in MAFs. Such changes will have knock-on effects on the energy budgets of active and passive suspension feeding organisms, as well as on their phenology, larval nutritional condition, and population viability. How the future seascape will be shaped by the new energy fluxes is a crucial question that has to be urgently addressed to mitigate and adapt to the diverse impacts on natural systems.Funding Agency European Union (EU) 327845 ICTA "Unit of Excellence" (MinECo) MDM2015-0552 CALMED project CTM2016-79547-R AGAUR Generalitat de Catalunya (MERS) 2017 SGR 1588 National Council for Scientific and Technological Development (CNPq)info:eu-repo/semantics/publishedVersio

Dye-sensitized solar cells based on dimethylamino-π-bridge-pyranoanthocyanin dyes

UID/QUI/50006/2019 PTDC/QEQ-QFI/1971/2014 PD/BD/135087/2017 SFRH/BD/136556/2018 SFRH/BD/143309/2019 IF/00225/2015 DL57/2016 Program Contract (HC). UID/CTM/50025/2019 PTDC/CTM-ENE/5125/2014 CNPq 444061/2018-5 Universal grant 408181/2016-3The pyranoanthocyanins present in red wine display great potential as photosensitizers in bio-inspired Dye-Sensitized Solar Cells (DSSCs). Following a biomimetic approach, a series of amino-π-bridge-pyranoanthocyanin derivatives were employed as dye sensitizers in DSSCs. The dimethylamine group was selected to take advantage of its electron-donor character and the possibility of ‘dual-mode anchoring’ ([sbnd]OH vs. dimethylamino) to titanium dioxide. The increase in π-conjugation via insertion of C[dbnd]C bonds affected molecule flexibility, electron-donor ability and the pH-dependent equilibria of the pyranoanthocyanin derivatives. The current vs. potential properties of photoanodes using these dyes pointed to essential features of the relationship between power conversion efficiency and dye structure. These included the influences of the dimethylamine group, of π-conjugation and of substitution in ring B on the adsorption of the dyes to TiO2 and on the overall performance of the DSSCs prepared from them with and without added acid. An overall efficiency of 2.55% was obtained for the best performing compound, 4-(dimethylamino)-cinnamyl-pyranocyanidin-3-O-glucoside (JO3), which consolidates the importance of this family of compounds as potential dye-sensitizers for DSSC applications.authorsversionpublishe