Direct Neutron Capture for Magic-Shell Nuclei

In neutron capture for magic--shell nuclei the direct reaction mechanism can be important and may even dominate. As an example we investigated the reaction $^{48}$Ca(n,$\gamma)^{49}$Ca for projectile energies below 250\,keV in a direct capture model using the folding procedure for optical and bound state potentials. The obtained theoretical cross sections are in agreement with the experimental data showing the dominance of the direct reaction mechanism in this case. The above method was also used to calculate the cross section for $^{50}$Ca(n,$\gamma)^{51}$Ca.Comment: REVTeX, 7 pages plus 3 uuencoded figures, the complete uuencoded postscript file is available at ftp://is1.kph.tuwien.ac.at/pub/ohu/calcium.u

The origins and development of Zuwīla, Libyan Sahara: an archaeological and historical overview of an ancient oasis town and caravan centre

Zuwīla in southwestern Libya (Fazzān) was one of the most important early Islamic centres in the Central Sahara, but the archaeological correlates of the written sources for it have been little explored. This paper brings together for the first time a detailed consideration of the relevant historical and archaeological data, together with new AMS radiocarbon dates from several key monuments. The origins of the settlement at Zuwīla were pre-Islamic, but the town gained greater prominence in the early centuries of Arab rule of the Maghrib, culminating with the establishment of an Ibāḍī state ruled by the dynasty of the Banū Khaṭṭāb, with Zuwīla its capital. The historical sources and the accounts of early European travellers are discussed and archaeological work at Zuwīla is described (including the new radiocarbon dates). A short gazetteer of archaeological monuments is provided as an appendix. Comparisons and contrasts are also drawn between Zuwīla and other oases of the ash-Sharqiyāt region of Fazzān. The final section of the paper presents a series of models based on the available evidence, tracing the evolution and decline of this remarkable site

The 3' region of Human Papillomavirus type 16 early mRNAs decrease expression

BACKGROUND: High risk human papillomavirus (HR-HPV) infects mucosal surfaces and HR-HPV infection is required for development of cervical cancer. Accordingly, enforced expression of the early HR-HPV proteins can induce immortalisation of human cells. In most cervical cancers and cervical cancer cell lines the HR-HPV double stranded DNA genome has been integrated into the host cell genome. METHODS: We have used a retroviral GUS reporter system to generate pools of stably transfected HaCaT and SiHa cells. The HPV-16 early sequences that are deleted upon integration of the HPV-16 genome was inserted into the 3' UTR of the reporter mRNA. Pools containing thousands of independent integrations were tested for the steady state levels of the reporter mRNA by Real Time PCR and reporter protein by a GUS enzymatic activity assays. In addition, we tested the cellular distribution and half lives of the reporter mRNAs. The integrity of the reporter mRNAs were tested by northern blotting. RESULTS: We show that the 3' region of the HPV-16 early mRNAs (HPV-16 nucleotide (nt.) 2582–4214) act in cis to decrease both mRNA and protein levels. This region seems to affect transcription from the exogenous minimal CMV promoter or processing of the reporter mRNA. The observed repression was most pronounced at the protein level, suggesting that this sequence may also affect translation. For the HPV types: 2, 6, 11, 13, 18, 30, 31, and 35 we have investigated the regulatory effect of the regions corresponding to the HPV-16 nt. 3358–4214. For all types, except HPV-18, the region was found to repress expression by posttranscriptional mechanisms. CONCLUSION: We find that the 3' region of HPV-16 early mRNAs interfere with gene expression. It is therefore possible that the deletion of the 3' part of early HPV-16 mRNAs occurring during cervical oncogenesis could contribute to transformation of cells through deregulation of the viral oncogene synthesis. Moreover, we find that the corresponding region from several other HPV types also repress expression, suggesting that the repression by this region may be a general feature of the HPV life cycle

Next generation spindles for micromilling.

There exists a wide variety of important applications for micro- and meso-scale mechanical systems in the commercial and defense sectors, which require high-strength materials and complex geometries that cannot be produced using current MEMS fabrication technologies. Micromilling has great potential to fill this void in MEMS technology by adding the capability of free form machining of complex 3D shapes from a wide variety and combination of traditional, well-understood engineering alloys, glasses and ceramics. Inefficiencies in micromilling result from the relationships between a cutting tool's breaking strength, the applied cutting force, and the metal removal rate. Because machining times in mesofeatures scale inversely to the part size, a feature 1/10th as large will take 10 times as long to machine. Also, required chip sizes of 1 m or less are cut with tools having edge radius of 2-3 m, the cutting edge effectively has a highly negative rake angle, cutting forces are increased significantly causing chip loads to be further reduced and the machining takes even longer than predicted above. However, cutting forces do not increase with cutting speed, so faster spindles with reduced tool runout are the path to achieve efficient mesoscale milling. This research explored the development of new ultra-high speed micromilling spindles. A novel air-bearing spindle design is discussed that will run at very high speeds (450,000 rpm) and provide very minimal runout allowing the best use of micromilling cutters and reducing overall machining time drastically. Two generations of this spindle design were completed; one with an air bearing supported tool shaft and one with a novel rolling element bearing supported tool shaft. Both designs utilized friction-drive systems that relied on diameter differences between the drive wheel (operating at speeds up to 90,000 rpm) and the tool shaft to achieve high rotational tool speeds. Runout, stiffness, and machining tests were conducted with the spindle designs and though they both showed promise for ultra-high speed machining, runout issues in the friction drive and in the stock tools kept the system from achieving sustained machining capability

The CogBIAS longitudinal study protocol: cognitive and genetic factors influencing psychological functioning in adolescence.

BACKGROUND: Optimal psychological development is dependent upon a complex interplay between individual and situational factors. Investigating the development of these factors in adolescence will help to improve understanding of emotional vulnerability and resilience. The CogBIAS longitudinal study (CogBIAS-L-S) aims to combine cognitive and genetic approaches to investigate risk and protective factors associated with the development of mood and impulsivity-related outcomes in an adolescent sample. METHODS: CogBIAS-L-S is a three-wave longitudinal study of typically developing adolescents conducted over 4 years, with data collection at age 12, 14 and 16. At each wave participants will undergo multiple assessments including a range of selective cognitive processing tasks (e.g. attention bias, interpretation bias, memory bias) and psychological self-report measures (e.g. anxiety, depression, resilience). Saliva samples will also be collected at the baseline assessment for genetic analyses. Multilevel statistical analyses will be performed to investigate the developmental trajectory of cognitive biases on psychological functioning, as well as the influence of genetic moderation on these relationships. DISCUSSION: CogBIAS-L-S represents the first longitudinal study to assess multiple cognitive biases across adolescent development and the largest study of its kind to collect genetic data. It therefore provides a unique opportunity to understand how genes and the environment influence the development and maintenance of cognitive biases and provide insight into risk and protective factors that may be key targets for intervention.This work was supported by the European Research Council (ERC) under the European Union’s Seventh Framework Programme (FP7/2007–2013)/ERC grant agreement no: [324176]

Individual development of preschool children - prevalences and determinants of delays in Germany: a cross-sectional study in Southern Bavaria

The electronic version of this article is the complete one and can be found online at: http://www.biomedcentral.com/1471-2431/12/188 Extent: 9p.Background: Even minor abnormalities of early child development may have dramatic long term consequences. Accurate prevalence rates for a range of developmental impairments have been difficult to establish. Since related studies have used different methodological approaches, direct comparisons of the prevalence of developmental delays are difficult. The understanding of the key factors affecting child development, especially in preschool aged children remains limited. We used data from school entry examinations in Bavaria to measure the prevalence of developmental impairments in pre-school children beginning primary school in 1997–2009. Methods: The developmental impairments of all school beginners in the district of Dingolfing- Landau, Bavaria were assessed using modified “Bavarian School Entry Model” examination from 1997 to 2009 (N=13,182). The children were assessed for motor, cognitive, language and psychosocial impairments using a standardised medical protocol. Prevalence rates of impairments in twelve domains of development were estimated. Using uni- and multivariable logistic regression models, association between selected factors and development delays were assessed. Results: The highest prevalence existed for impairments of pronunciation (13.8%) followed by fine motor impairments (12.2%), and impairments of memory and concentration (11.3%) and the lowest for impairments of rhythm of speech (3.1%). Younger children displayed more developmental delays. Male gender was strongly associated with all developmental impairments (highest risk for fine motor impairments = OR 3.22, 95% confidence interval 2.86-3.63). Preschool children with siblings (vs. children without any siblings) were at higher risk of having impairments in pronunciation (OR 1.31, 1.14-1.50). The influence of the non-German nationality was strong, with a maximum risk increase for the subareas of grammar and psychosocial development. Although children with non-German nationality had a reduced risk of disorders for the rhythm of speech and pronunciation, in all other 10 subareas their risk was increased. Conclusions: In preschool children, most common were delays of pronunciation, memory and concentration. Age effects suggest that delays can spontaneously resolve, but providing support at school entry might be helpful. Boys and migrant children appear at high risk of developmental problems, which may warrant tailored intervention strategies.Heribert L Stich, Bernhard Th Baune, Riccardo N Caniato, Rafael T Mikolajczyk and Alexander Kräme