92 research outputs found
A Trust Model Based on Service Classification in Mobile Services
Internet of Things (IoT) and B3G/4G communication are promoting the pervasive
mobile services with its advanced features. However, security problems are also
baffled the development. This paper proposes a trust model to protect the
user's security. The billing or trust operator works as an agent to provide a
trust authentication for all the service providers. The services are classified
by sensitive value calculation. With the value, the user's trustiness for
corresponding service can be obtained. For decision, three trust regions are
divided, which is referred to three ranks: high, medium and low. The trust
region tells the customer, with his calculated trust value, which rank he has
got and which authentication methods should be used for access. Authentication
history and penalty are also involved with reasons.Comment: IEEE/ACM Internet of Things Symposium (IOTS), in conjunction with
GreenCom 2010, IEEE, Hangzhou, China, December 18-20, 201
A Novel Buffer Tank to Attenuate the Peak Flow of Runoff
Impermeable pavements and roofs in urban areas convert most rainfall to runoff, which is commonly discharged to local sewers pipes and finally to the nearby streams and rivers. In case of heavy rain, the peak flow of runoff usually exceeds the carrying capacity of the local sewer pipes, leading to urban flooding. Traditional facilities, such as green roofs, permeable pavements, soakaways, rainwater tanks, rain barrels, and others reduce the runoff volume in case of a small rain but fail in case of a heavy rain. Here we propose a novel rainwater buffer tank to detain runoff from the nearby sealed surfaces in case of heavy rain and then to discharge rainwater from an orifice at the tank’s bottom. We found that considering a 100m2 rooftop with 0.80 runoff coefficient and a 10cm rainfall depth for an hour, a cubic tank with internal edge side of a square of 2 m attenuates the peak flow about 45%. To reduce a desirable peak flow, the outlet orifice of the buffer tank must be optimized according to site-specific conditions. The orifice can be set at an elevation from the tank’s bottom to create a dead storage for harvesting rainwater
Lowering emissivity of concrete roof tile\u27s underside cuts down heat entry to the building
Buildings in Southern China widely use a double-skin roof to reduce heat entry through the roof to the building interior during summertime. Concrete roof tiles are preferably installed as the outmost layer of the double-skin roof due to their resistance to hail and wind damages and their attractive price. However, after construction, the tile’s top tends to be darkened by dust deposit and algae growth, increasing the heat entry through the roof to the building. Here, we show that this heat entry can be curtailed by lowering the emissivity at the tile’s underside. Temperatures and heat fluxes at different elevations of a double-skin roof with concrete tiles as the outmost layer of the roof are monitored. The underside of each concrete tile is coated with a specific paint to get a unique emissivity. Observations reveal that lowering the emissivity of concrete roof tiles could cut down the summer heat gain of buildings in tropical regions
Overview of the application of ecological concrete in sponge city construction
As a prominent component of the construction field of sponge cities, ecological concrete is an essential tool to reach the goals of green, low-carbon living and sustainable development. A quantitative summary of the preliminary research on ecological concrete infrastructure in sponge city architecture is needed. Therefore, CiteSpace and VOSviewer were applied to perform a comparative analysis of the number of papers, countries, institutions, core authors, literature co-citations, research hotspots, and future trends in ecological concrete in the sponge city construction industry. The results show that the number of papers on ecological concrete is increasing, the research collaboration between domestic and foreign authors is relatively single, and there is insufficient interdisciplinary integration between institutions and the phenomenon of “relatively independent research.” The number of papers published in the field of ecological concrete construction has been on the rise, reaching more than 100 in each of the last 10 years, with China and the United States contributing more to the scientific output of the field. To meet the needs of global environmental protection and resource conservation, the theme of “promoting comprehensive resource conservation and recycling” will continue in the future, making concrete a feature of green, low-carbon, sustainable development and other areas of environmental protection in the construction field
SODIUM AESCINATE INJECTION FOR SKIN FLAP TRANSPLANTATION OF HAND OR FOOT IN CHILDREN
Background: The purpose of this study is to evaluate the efficiency and safety of sodium aescinate injection for treating children suffering transplanted flap in children hand or foot.
Materials and Methods: Ninety children patients with transplanted cutaneous nerve nutrition vascular flaps in hand or foot were selected and divided into “treatment” and “control” groups randomly by computer. The treatment group was prescribed intravenous sodium aescine injection and conventional therapy. The control group was only offered conventional therapy. Seven days following treatment, cumulative wound drainage, swelling of flap and adverse reactions were recorded. One month subsequent to treatment, two-point discrimination of flap was recorded. At the outset of treatment (0-d) and 1, 3, 7-days following treatment, the concentrations of C-reactive protein (CRP) and malondialdehyde(MDA) in venous blood were tested.
Results: At the outset of treatment, there was no statistically significant difference between the two groups in terms of CRP and MDA (P>0.05). At 3 and 7 day intervals following treatment, the concentrations of CRP and MDA in treatment group were lower than those in control group (
Determination of cinnamic acid in human urine by flow injection chemiluminescence
It was found that cinnamic acid can react with potassium permanganate in the acidic medium and produce chemiluminescence, which was greatly enhanced by glyoxal. Under the optimum conditions, the linear range for the determination of cinnamic acid was 1.0Ă—10-8 to 1.0Ă—10-4 mol L-1 with a detection limit of 8.0Ă—10-9 mol L-1, the relative standard deviation was 1.7% for 2.0Ă—10-6 mol L-1 cinnamic acid solution in nine repeated measurements. This method was found to be novel0simple0fast and sensitive, it was successfully applied to the determination of cinnamic acid in human urine. Furthermore, the possible reaction mechanism was also discussed
Recommended from our members
Adaptive Resource Provisioning for Virtualized Servers Using Kalman Filters
Resource management of virtualized servers in data-centres has become a critical task, since it enables costeffective consolidation of server applications. Resource management is an important and challenging task, especially for multi-tier applications with unpredictable time-varying workloads. Work in resource management using control theory has shown clear benefits of dynamically adjusting resource allocations to match fluctuating workloads. However, little work has been done towards adaptive controllers for unknown workload types. This work presents a new resource management scheme that incorporates the Kalman filter into feedback controllers to dynamically allocate CPU resources to virtual machines hosting server applications. We present a set of controllers that continuously detect and self-adapt to unforeseen workload changes. Furthermore, our most advanced controller also self-configures itself without any a priori information and with a small 4.8% performance penalty in the case of high intensity workload changes. In addition, our controllers are enhanced to deal with multi-tier server applications: by using the pair-wise resource coupling between tiers, they improve server response to large workload increases as compared to controllers with no such resource-coupling mechanism. Our approaches are evaluated and their performance is illustrated on a 3-tier Rubis benchmark web-site deployed on a prototype Xen-virtualized cluster
Fine mapping of the major gene BhHLS1 controlling seed size in wax gourd (Benincasa hispida)
Introduction/BackgroundThe seed size of wax gourds is an important agronomic trait; however, the associated genes have not yet been reported.MethodsIn this study, we used a high-density genetic map constructed based on F8 recombinant inbred line populations derived from a cross between MY-1 (large seed) and GX-71 (small seed) strains to detect quantitative trait locis (QTLs) for seed-size-related traits in wax gourd over a two-year period.ResultsTwo stable QTLs (qSL10 and qSW10) for seed length (SL) and seed width (SW) on chromosome 10 were repeatedly detected over two years (2021–2022). qSL10 had a phenotypic variation rate of 75.30% and 80.80% in 2021 and 2022, respectively. Whereas, qSW10 had a phenotypic variation rate of 66.60% and 73.80% in 2021 and 2022, respectively. Further, a single nucleotide polymorphism mutation was found to cause early termination of Bch10G006400 (BhHLS1) translation in GX-71 through sequencing analysis of candidate genes. Based on gene functional annotation and quantitative real-time PCR analyses, BhHLS1 encoded a probable N-acetyltransferase HLS1-like protein and its expression level was significantly different between parents. Therefore, BhHLS1 is a major candidate gene associated with a one-factor polymorphism regulating the SL and SW of wax gourds. Finally, based on variation in the BhHLS1 sequence, a cleaved amplified polymorphic sequence marker was developed for the molecular marker-assisted breeding of wax gourds.DiscussionOverall, this study is of great significance for the genetic improvement of seed size, verification of gene functions, and cultivation of specific germplasm resources for wax gourds
- …