53 research outputs found

    PTK6 Regulates IGF-1-Induced Anchorage-Independent Survival

    Get PDF
    Background: Proteins that are required for anchorage-independent survival of tumor cells represent attractive targets for therapeutic intervention since this property is believed to be critical for survival of tumor cells displaced from their natural niches. Anchorage-independent survival is induced by growth factor receptor hyperactivation in many cell types. We aimed to identify molecules that critically regulate IGF-1-induced anchorage-independent survival. Methods and Results: We conducted a high-throughput siRNA screen and identified PTK6 as a critical component of IGF-1 receptor (IGF-1R)-induced anchorage-independent survival of mammary epithelial cells. PTK6 downregulation induces apoptosis of breast and ovarian cancer cells deprived of matrix attachment, whereas its overexpression enhances survival. Reverse-phase protein arrays and subsequent analyses revealed that PTK6 forms a complex with IGF-1R and the adaptor protein IRS-1, and modulates anchorage-independent survival by regulating IGF-1R expression and phosphorylation. PTK6 is highly expressed not only in the previously reported Her2+^+ breast cancer subtype, but also in high grade ER+^+, Luminal B tumors and high expression is associated with adverse outcomes. Conclusions: These findings highlight PTK6 as a critical regulator of anchorage-independent survival of breast and ovarian tumor cells via modulation of IGF-1 receptor signaling, thus supporting PTK6 as a potential therapeutic target for multiple tumor types. The combined genomic and proteomic approaches in this report provide an effective strategy for identifying oncogenes and their mechanism of action

    Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

    Get PDF
    Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat

    Mortality from gastrointestinal congenital anomalies at 264 hospitals in 74 low-income, middle-income, and high-income countries: a multicentre, international, prospective cohort study

    Get PDF
    Summary Background Congenital anomalies are the fifth leading cause of mortality in children younger than 5 years globally. Many gastrointestinal congenital anomalies are fatal without timely access to neonatal surgical care, but few studies have been done on these conditions in low-income and middle-income countries (LMICs). We compared outcomes of the seven most common gastrointestinal congenital anomalies in low-income, middle-income, and high-income countries globally, and identified factors associated with mortality. Methods We did a multicentre, international prospective cohort study of patients younger than 16 years, presenting to hospital for the first time with oesophageal atresia, congenital diaphragmatic hernia, intestinal atresia, gastroschisis, exomphalos, anorectal malformation, and Hirschsprung’s disease. Recruitment was of consecutive patients for a minimum of 1 month between October, 2018, and April, 2019. We collected data on patient demographics, clinical status, interventions, and outcomes using the REDCap platform. Patients were followed up for 30 days after primary intervention, or 30 days after admission if they did not receive an intervention. The primary outcome was all-cause, in-hospital mortality for all conditions combined and each condition individually, stratified by country income status. We did a complete case analysis. Findings We included 3849 patients with 3975 study conditions (560 with oesophageal atresia, 448 with congenital diaphragmatic hernia, 681 with intestinal atresia, 453 with gastroschisis, 325 with exomphalos, 991 with anorectal malformation, and 517 with Hirschsprung’s disease) from 264 hospitals (89 in high-income countries, 166 in middleincome countries, and nine in low-income countries) in 74 countries. Of the 3849 patients, 2231 (58·0%) were male. Median gestational age at birth was 38 weeks (IQR 36–39) and median bodyweight at presentation was 2·8 kg (2·3–3·3). Mortality among all patients was 37 (39·8%) of 93 in low-income countries, 583 (20·4%) of 2860 in middle-income countries, and 50 (5·6%) of 896 in high-income countries (p<0·0001 between all country income groups). Gastroschisis had the greatest difference in mortality between country income strata (nine [90·0%] of ten in lowincome countries, 97 [31·9%] of 304 in middle-income countries, and two [1·4%] of 139 in high-income countries; p≤0·0001 between all country income groups). Factors significantly associated with higher mortality for all patients combined included country income status (low-income vs high-income countries, risk ratio 2·78 [95% CI 1·88–4·11], p<0·0001; middle-income vs high-income countries, 2·11 [1·59–2·79], p<0·0001), sepsis at presentation (1·20 [1·04–1·40], p=0·016), higher American Society of Anesthesiologists (ASA) score at primary intervention (ASA 4–5 vs ASA 1–2, 1·82 [1·40–2·35], p<0·0001; ASA 3 vs ASA 1–2, 1·58, [1·30–1·92], p<0·0001]), surgical safety checklist not used (1·39 [1·02–1·90], p=0·035), and ventilation or parenteral nutrition unavailable when needed (ventilation 1·96, [1·41–2·71], p=0·0001; parenteral nutrition 1·35, [1·05–1·74], p=0·018). Administration of parenteral nutrition (0·61, [0·47–0·79], p=0·0002) and use of a peripherally inserted central catheter (0·65 [0·50–0·86], p=0·0024) or percutaneous central line (0·69 [0·48–1·00], p=0·049) were associated with lower mortality. Interpretation Unacceptable differences in mortality exist for gastrointestinal congenital anomalies between lowincome, middle-income, and high-income countries. Improving access to quality neonatal surgical care in LMICs will be vital to achieve Sustainable Development Goal 3.2 of ending preventable deaths in neonates and children younger than 5 years by 2030

    A Building LCA Case Study Using Autodesk Ecotect and BIM Model

    Get PDF
    The main objective of this study is to evaluate the potential of utilizing building information model (BIM) to perform whole building Life Cycle Analysis (LCA). The research question addressed was how life cycle performance of a building was affected quantitatively by design configurations. Life cycle energy consumption and CO2 emission of a university building in the Midwest was calculated using Autodesk® Ecotect and BIM model. The study compared life cycle performance, i.e., CO2 emissions and energy consumptions, among different design configurations, as well as their distributions in the stages of the building’s life time. Sensitivity analysis was performed by changing several alternative parameters, to identify which parameter has more impacts on building performance. Preliminary results indicated that whole building life cycle performance is affected by several design parameters, with different degree of sensitivity. The conclusions of the study are: 1) The combination of Ecotect and BIM model provides a convenient tool to conduct whole building LCA through the easier data flow from the BIM model to Ecotect. The data entry workload for whole building LCA can be reduced significantly. 2) Energy consumption in the operating stage dominates the lifecycle energy consumption of the building. 3) Sensitivity analysis of impact of design change can be conducted using the combination of Ecotect and BIM model

    The effect of phase separation on crystal nucleation density and lamella growth in near-critical polyolefin blends

    No full text
    We have studied the effect of liquid-liquid phase separation on crystallization in near-critical blends of poly(ethylene-co-hexene)/ poly(ethylene-co-octene) and poly(ethylene-co-hexene)/poly(ethylene-co-butene) using optical microscopy and simultaneous small and wide angle X-ray scattering. Two quenching schemes were used in this study: (1) single-quench, a homogeneous melt quickly cooled to the crystallization temperature, and (2) double-quench, a homogeneous melt quickly cooled to an intermediate temperature, which allows for occurring phase separation but not crystallization, then to the crystallization temperature. We could found more crystalline nuclei in case of single-quench than of double-quench. The long spacing of lamellar crystals is approximately 20Å larger in single-quench than in double-quench, due primarily to the inclusion of more non-crystallizable components in the amorphous layers of lamellar stacks in the former. The degree of crystallinity is about three times higher in single-quench. © 2004 Elsevier Ltd. All rights reserved

    Kinetics of phase separation and crystallization in poly(ethylene-ran-hexene) and poly(ethylene-ran-octene)

    No full text
    The kinetics of phase separation and crystallization in the blends of poly(ethylene-ran-hexene) (PEH) and poly(ethylene-ran-octene) (PEOC) at several compositions were studied using phase contrast optical microscopy and time-resolved simultaneous small-angle X-ray scattering and wide-angle X-ray diffraction. The phase contrast optical microscopy showed the interconnected bicontinuous structure during phase separation process, which is characteristic of a spinodal decomposition. During isothermal crystallization, the average lamellar spacing increases with time for blends at all concentrations. The crystallinity and crystal growth rate depend on the PEH concentration. At dilute PEH concentrations, crystallization of PEH chains is difficult because they are surrounded by many non-crystallizable PEOC chains. On the other hand, at higher PEH concentrations, crystallization processes are similar to pure PEH. For example, the spherulitic growth rates are similar for a PEH/PEOC = 50/50 blend and pure PEH. Published by Elsevier Ltd
    corecore