4,652 research outputs found
High-yield cellulase production in solid-state fermentation by Trichoderma reesei SEMCC-3.217 using water hyacinth (Eichhornia crassipes)
In this study, the strain Trichoderma reesei SEMCC-3.217 was used for producing cellulase in solid-state fermentation with water hyacinth (Eichhornia crassipes). The results of fractional factorial design showed that, the addition amount of wheat bran, (NH4)2SO4, CaCl2 and Tween 80 had significant effect on the cellulase production. Then, these four factors were selected for further optimization by central composite design for the yield of cellulase. The statistical analysis of the results showed that, the optimum composition were: 5 g of substrate containing 3.9 g water hyacinth, 1% corn steep liquor, 1% soybean meal, 0.2% NH4NO3, 0.2% KH2PO4, 0.08% MgSO4·7H2O, 2.8% (NH4)2SO4, 1.5% urea, 13.9% wheat bran, 0.08% ZnSO4·7H2O, 0.08% FeCl2 0.05% CaCl2, 0.08% NaNO3, 0.08% KCl and 0.27% (v/v) Tween-80. Under these conditions, the cellulase production was 4-fold increased (13.4 FPIU/g dry solid) compared with the initial level (3.4 FPIU/g dry solid) after 7 days of fermentation in a 250 ml Erlenmeyer flask.Key words: Cellulase, solid-state fermentation, optimization, water hyacinth, Trichoderma reesei
Recommended from our members
Impact of aircraft emissions on reactive nitrogen over the North Atlantic Flight Corridor region
Recommended from our members
In situ measurements of HCN and CH3CN over the Pacific Ocean: Sources, sinks, and budgets
We report the first in situ measurements of hydrogen cyanide (HCN) and methyl cyanide (CH3CN, acetonitrile) from the Pacific troposphere (0-12 km) obtained during the NASA Transport and Chemical Evolution over the Pacific (TRACE-P) airborne mission (February-April 2001). Mean HCN and CH3CN mixing ratios of 243 ± 118 (median 218) ppt and 149 ± 56 (median 138) ppt, respectively, were measured. These in situ observations correspond to a mean tropospheric HCN column of 4.2 à 1015 molecules cm-2 and a CH3CN column of 2.5 à 1015 molecules cm-2. This is in good agreement with the 0-12 km HCN column of 4.4 (±0.6) à 1015 molecules cm-2 derived from infrared solar spectroscopic observations over Japan. Mixing ratios of HCN and CH3CN were greatly enhanced in pollution outflow from Asia and were well correlated with each other as well as with known tracers of biomass combustion (e.g., CH3Cl, CO). Volumetric enhancement (or emission) ratios (ERs) relative to CO in free tropospheric plumes, likely originating from fires, were 0.34% for HCN and 0.17% for CH3CN. ERs with respect to CH3Cl and CO in selected biomass burning (BB) plumes in the free troposphere and in boundary layer pollution episodes are used to estimate a global BB source of 0.8 ± 0.4 Tg (N) yr-1 for HCN and 0.4 ± 0.1 Tg (N) yr-1 for CH3CN. In comparison, emissions from industry and fossil fuel combustion are quite small (<0.05 Tg (N) yr-1). The vertical structure of HCN and CH3CN indicated reduced mixing ratios in the marine boundary layer (MBL). Using a simple box model, the observed gradients across the top of the MBL are used to derive an oceanic loss rate of 8.8 à 10-15 g (N) cm-2 s-1 for HCN and 3.4 à 10-15 g (N) cm-2 s-1 for CH3CN. An air-sea exchange model is used to conclude that this flux can be maintained if the oceans are undersaturated in HCN and CH3CN by 27% and 6%, respectively. These observations also correspond to an open ocean mean deposition velocity (vd) of 0.12 cm s-1 for HCN and 0.06 cm s-1 for CH3CN. It is inferred that oceanic loss is a dominant sink for these cyanides and that they deposit some 1.4 Tg (N) of nitrogen annually to the oceans. Assuming loss to the oceans and reaction with OH radicals as the major removal processes, a mean atmospheric residence time of 5.0 months for HCN and 6.6 months for CH3CN is calculated. A global budget analysis shows that the sources and sinks of HCN and CH3CN are roughly in balance but large uncertainties remain in part due to a lack of observational data from the atmosphere and the oceans. Pathways leading to the oceanic (and soil) degradation of these cyanides are poorly known but are expected to be biological in nature
Casimir forces on a silicon micromechanical chip
Quantum fluctuations give rise to van der Waals and Casimir forces that
dominate the interaction between electrically neutral objects at sub-micron
separations. Under the trend of miniaturization, such quantum electrodynamical
effects are expected to play an important role in micro- and nano-mechanical
devices. Nevertheless, utilization of Casimir forces on the chip level remains
a major challenge because all experiments so far require an external object to
be manually positioned close to the mechanical element. Here, by integrating a
force-sensing micromechanical beam and an electrostatic actuator on a single
chip, we demonstrate the Casimir effect between two micromachined silicon
components on the same substrate. A high degree of parallelism between the two
near-planar interacting surfaces can be achieved because they are defined in a
single lithographic step. Apart from providing a compact platform for Casimir
force measurements, this scheme also opens the possibility of tailoring the
Casimir force using lithographically defined components of non-conventional
shapes
Consideration of Human Factors in a Design of Fire-rescue Window
Fire-rescue window is a NPD (new product development) project that aims to increase the successful rate of fire rescue. The concept attempts being used in residential buildings and public constructions. The project places greater emphasis on providing a safe space for sufferers such as elder people, children and disables. It intended to insulate people from a fire through easy operations and to enhance safety and usability. After several tests, it is proofed that the product appears to be an effective and creative solution in fire rescue. Human factors knowledge has been considered over the NPD process at both physical (anthropometric) and psychological (cognitive) levels. Based on background research and application of new material & technology, the concept learned from mechanism principle and assimilated into understanding of environment/system design, Kansei engineering and material technology. Driven by user centred design, the design conducted various research methods in terms of observation, recording and analysis. Sufferersâ data and information have been discovered/ collected, in particular disables. This helps to determine a proper route of escaping. A prototype of concept simulated the windowâs covetable structure and function, as well as testified the rationality of special usage. The fire-rescue window is named as - âHarbourâ, which won the gold medal of âJanus Design Award 2016â in France. âHarbourâ has been recognized as one of the successful solutions in the field of fire rescue. It also passed the ergonomic evaluation and is expected to satisfy various rescue requirements precisely and efficiently
Soil-water interacting use patterns driven by Ziziphus jujuba on the Chenier Island in the Yellow River Delta, China
The determination of water use patterns of plants in a coastal ecosystem is critical to our understanding of local eco-hydrological processes and predicting trends in ecological succession under the background of global climate change. The water use patterns of Ziziphus jujuba, the dominant species on the Chenier Island in the Yellow River Delta, were examined following summer rainfall events. Stable oxygen isotope analysis was employed to analyze the effects of rainfall on the stable isotopic composition in potential water sources in Z. jujuba. The IsoSource model was used to estimate the contributions of potential water sources for xylem water in Z. jujuba. The results showed heavy rainfall could recharge both soil and groundwater but contributed little to the O-18 values in deep soil water (60-100cm) and groundwater. Light rainfall had an effect only on surface soil water (0-40cm). Z. jujuba mainly absorbed deep soil water on non-rainy days. Rainwater became the predominant water source for Z. jujuba during and immediately after heavy rainfall. Switching the plant's main water source between deep soil water and rainwater provided Z. jujuba with a competitive advantage and improved the water use efficiency of Z. jujuba in this coastal ecosystem
Robust radiative cooling via surface phonon coupling-enhanced emissivity from SiO2 micropillar arrays
Silicon dioxide (SiO2) is a prominent candidate for radiative cooling applications due to its low absorption in solar wavelengths (0.25-2.5 ”m) and exceptional stability. However, its bulk phonon-polariton band results in a strong reflection peak in the atmospheric transparency window (8-13 ”m), making it difficult to meet the requirements for sub-ambient passive radiative cooling. Herein, we demonstrate that SiO2 micropillar arrays can effectively suppress infrared reflection at 8-13 ”m and enhance the infrared emissivity by optimizing the micropillar array structure. We created a pattern with a height, spacing, and diameter of approximately 1.45 ”m, 0.15 ”m, and 0.35 ”m, respectively, on top of a bulk SiO2 substrate using reactive ion etching. The resulting surface phonon coupling of the micropillar array led to an increase in the thermal emissivity from 0.79 to 0.94. Outdoor tests show that the SiO2 cooler with an optimized micropillar array can generate an average temperature drop of 5.5 °C throughout the daytime underneath an irradiance of 843.1 W/m^2 at noon. Furthermore, the micropillar arrays endow the SiO2 cooler with remarkable hydrophobic properties, attributed to the formation of F/C compounds introduced during the etching process. Finally, we also replicated the micropillar pattern onto the surface of industrial optical solar reflectors (OSRs), demonstrating similar emissivity and hydrophobicity enhancements. Our findings revealed an effective strategy for modifying the thermal management features of durable SiO2 layers, which can be harnessed to cool OSRs and other similar sky-facing devices
Recent progress in organic-based radiative cooling materials: fabrication methods and thermal management properties
Organic-based materials capable of radiative cooling have attracted widespread interest in recent years due to their ease of engineering and good adaptability to different application scenarios. As a cooling material for walls, clothing, and electronic devices, these materials can reduce the energy consumption load of air conditioning, improve thermal comfort, and reduce carbon emissions. In this paper, an overview is given of the current fabrication strategies of organic-based radiative cooling materials, and of their properties. The methods and joint thermal management strategies including evaporative cooling, phase-change materials, fluorescence, and light-absorbing materials that have been demonstrated in conjunction with a radiative cooling function are also discussed. This review provides a comprehensive overview of organic-based radiative cooling, exemplifying the emerging application directions in this field and highlighting promising future research directions in the field
Designer SiO2 Metasurfaces for Efficient Passive Radiative Cooling
In recent years, an increasing number of passive radiative cooling materials are proposed in the literature, with several examples relying on the use of silica (SiO2) due to its unique stability, non-toxicity, and availability. Nonetheless, due to its bulk phonon-polariton band, SiO2 presents a marked reflection peak within the atmospheric transparency window (8-13 mu m), leading to an emissivity decrease that poses a challenge to fulfilling the criteria for sub-ambient passive radiative cooling. Thus, the latest developments in this field are devoted to the design of engineered SiO2 photonic structures, to increase the cooling potential of bulk SiO2 radiative coolers. This review seeks to identify the most effective photonic design and fabrication strategies for SiO2 radiative emitters by evaluating their cooling efficacy, as well as their scalability, providing an in-depth analysis of the fundamental principles, structural models, and results (both numerical and experimental) of various types of SiO2 radiative coolers
The role of input noise in transcriptional regulation
Even under constant external conditions, the expression levels of genes
fluctuate. Much emphasis has been placed on the components of this noise that
are due to randomness in transcription and translation; here we analyze the
role of noise associated with the inputs to transcriptional regulation, the
random arrival and binding of transcription factors to their target sites along
the genome. This noise sets a fundamental physical limit to the reliability of
genetic control, and has clear signatures, but we show that these are easily
obscured by experimental limitations and even by conventional methods for
plotting the variance vs. mean expression level. We argue that simple, global
models of noise dominated by transcription and translation are inconsistent
with the embedding of gene expression in a network of regulatory interactions.
Analysis of recent experiments on transcriptional control in the early
Drosophila embryo shows that these results are quantitatively consistent with
the predicted signatures of input noise, and we discuss the experiments needed
to test the importance of input noise more generally.Comment: 11 pages, 5 figures minor correction
- âŠ