Evaluation on the Effects of Deicing Chemicals on Soil and Water Environment

AbstractDeicing chemicals are widely used to clear the pavement snow in the cold areas of China and many other countries in winter, because of their simple operation and excellent snow-melting effect, which leads to more convenience for traffic and low probability of traffic accident in the city, especially in metropolis. However, with the ever-growing application of deicing chemicals, their negative effects on environment such as soil and water system increased dramatically. Based on the related researches in China and abroad, this paper summarized the two categories of deicing chemicals and their working principles, and then provided the unique characteristics of deicing chemicals’ effects on soil and water environment in large cities, which may need considerable quantity of the chemicals to relieve traffic congestion. What's more, main aspects of impacts by deicing chemicals on regional soil and water environment and the fundamental factors related to the aspects above respectively were generalized, in order to propose a conceptual model to evaluate the harmful effects. Moreover, this paper put forward some suggestions for the further research in this field to fulfill the model, and provided a scientific basis for the pollution prevention of deicing chemicals on urban environment

Compton Imaging of MeV Gamma-Rays with the Liquid Xenon Gamma-Ray Imaging Telescope (LXeGRIT)

The Liquid Xenon Gamma-Ray Imaging Telescope (LXeGRIT) is the first realization of a liquid xenon time projection chamber for Compton imaging of MeV gamma-ray sources in astrophysics. By measuring the energy deposit and the three spatial coordinates of individual gamma-ray scattering points, the location of the source in the sky is inferred with Compton kinematics reconstruction. The angular resolution is determined by the detector's energy and spatial resolutions, as well as by the separation in space between the first and second scattering. The imaging response of LXeGRIT was established with gamma-rays from radioactive sources, during calibration and integration at the Columbia Astrophysics Laboratory, prior to the 2000 balloon flight mission. In this paper we describe in detail the various steps involved in imaging sources with LXeGRIT and present experimental results on angular resolution and other parameters which characterize its performance as a Compton telescope.Comment: 22 pages, 20 figures, submitted to NIM

A Linear Approach for Depth and Colour Camera Calibration Using Hybrid Parameters

Many recent applications of computer graphics and human computer interaction have adopted both colour cameras and depth cameras as input devices. Therefore, an effective calibration of both types of hardware taking different colour and depth inputs is required. Our approach removes the numerical difficulties of using non-linear optimization in previous methods which explicitly resolve camera intrinsics as well as the transformation between depth and colour cameras. A matrix of hybrid parameters is introduced to linearize our optimization. The hybrid parameters offer a transformation from a depth parametric space (depth camera image) to a colour parametric space (colour camera image) by combining the intrinsic parameters of depth camera and a rotation transformation from depth camera to colour camera. Both the rotation transformation and intrinsic parameters can be explicitly calculated from our hybrid parameters with the help of a standard QR factorisation. We test our algorithm with both synthesized data and real-world data where ground-truth depth information is captured by Microsoft Kinect. The experiments show that our approach can provide comparable accuracy of calibration with the state-of-the-art algorithms while taking much less computation time (1/50 of Herrera’s method and 1/10 of Raposo’s method) due to the advantage of using hybrid parameters

Effect of CO2 on the Processing of Y-Ba-Cu-O Superconductors

The superconducting properties of YBa2Cu3O6+x reacted with various known ratios of O2/CO2 gas mixtures during sintering at different temperatures were studied. Jc was found to decrease drastically upon reaction with CO2, becoming zero at certain CO2 activities. The stability region for the 123 superconductor, as a function of CO2 activity and temperature, was empirically formulated as follows: log pCO2 \u3c (−45,000)/T + 33.4. The grain boundaries in sintered samples with Jc = 0 were investigated with HRTEM in conjunction with EDS. Two distinct types of grain boundaries were observed. Approximately 10% of the grain boundaries were wet by a thin layer of a second phase, deduced to be BaCuO2. The remaining boundaries were sharp grain boundaries. The grain structure near the sharp grain boundaries was tetragonal. These two types of grain boundaries are thought to be responsible for Jc being zero

Well-posedness of Bimodal State-based Switched Systems

AbstractIn this work, we consider the well-posedness of state-based switched systems in the sense of piecewise classical solutions which commonly arise in the control of hybrid systems. We give some necessary and sufficient conditions for the well-posedness of this class of systems. These results can be used as tools for excluding the bimodal system having a Zeno state

O- and H- induced surface core level shifts on Ru(0001): Prevalence of the additivity rule

In previous work on adsorbate-induced surface core level shifts (SCLSs), the effects caused by O atom adsorption on Rh(111) and Ru(0001) were found to be additive: the measured shifts for first layer Ru atoms depended linearly on the number of directly coordinated O atoms. Density-functional theory calculations quantitatively reproduced this effect, allowed separation of initial and final state contributions, and provided an explanation in terms of a roughly constant charge transfer per O atom. We have now conducted similar measurements and calculations for three well-defined adsorbate and coadsorbate layers containing O and H atoms: (1 x 1)-H, (2 x 2)-(O+H), and (2 x 2)-(O+3H) on Ru(0001). As H is stabilized in fcc sites in the prior two structures and in hcp sites in the latter, this enables us to not only study coverage and coadsorption effects on the adsorbate-induced SCLSs, but also the sensitivity to similar adsorption sites. Remarkably good agreement is obtained between experiment and calculations for the energies and geometries of the layers, as well as for all aspects of the SCLS values. The additivity of the next-neighbor adsorbate-induced SCLSs is found to prevail even for the coadsorbate structures. While this confirms the suggested use of SCLSs as fingerprints of the adsorbate configuration, their sensitivity is further demonstrated by the slightly different shifts unambiguously determined for H adsorption in either fcc or hcp hollow sites.Comment: 9 pages including 4 figures; related publications can be found at http://www.fhi-berlin.mpg.de/th/th.htm

Testing a Family Supportive End of Life Care Intervention in a Chinese Neonatal Intensive Care Unit: A Quasi-experimental Study With a Non-randomized Controlled Trial Design

Background: Neonatal death often occurs in tertiary Neonatal Intensive Care Units (NICUs). In China, end-of-life-care (EOLC) does not always involve parents. Aim: The aim of this study is to evaluate a parent support intervention to integrate parents at the end of life of their infant in the NICU. Methods: A quasi-experimental study using a non-randomized clinical trial design was conducted between May 2020 and September 2021. Participants were infants in an EOLC pathway in the NICU and their parents. Parents were allocated into a family supportive EOLC intervention group or a standard EOLC group based on their wishes. The primary outcomes depression (Edinburgh Postnatal Depression Scale for mothers; Hamilton Depression rating scale for fathers) and Satisfaction with Care were measured 1 week after infants' death. Student t-test for continuous variables and the Chi-square test categorical variables were used in the statistical analysis. Results: In the study period, 62 infants died and 45 infants and 90 parents were enrolled; intervention group 20 infants, standard EOLC group 25 infants. The most common causes of death in both groups were congenital abnormalities (n = 20, 44%). Mean gestational age of infants between the family supportive EOLC group and standard EOLC group was 31.45 vs. 33.8 weeks (p = 0.234). Parents between both groups did not differ in terms of age, delivery of infant, and economic status. In the family support group, higher education levels were observed among mother (p = 0.026) and fathers (p = 0.020). Both mothers and fathers in the family supportive EOLC group had less depression compared to the standard EOLC groups; mothers (mean 6.90 vs. 7.56; p = 0.017) and fathers (mean 20.7 vs. 23.1; p < 0.001). Parents reported higher satisfaction in the family supportive EOLC group (mean 88.9 vs. 86.6; p < 0.001). Conclusions: Supporting parents in EOLC in Chinese NICUs might decreased their depression and increase satisfaction after the death of their infant. Future research needs to focus on long-term effects and expand on larger populations with different cultural backgrounds. Clinical Trial Registration: www.ClinicalTrials.gov, identifier: NCT05270915

Fluid Models of Many-server Queues with Abandonment

We study many-server queues with abandonment in which customers have general service and patience time distributions. The dynamics of the system are modeled using measure- valued processes, to keep track of the residual service and patience times of each customer. Deterministic fluid models are established to provide first-order approximation for this model. The fluid model solution, which is proved to uniquely exists, serves as the fluid limit of the many-server queue, as the number of servers becomes large. Based on the fluid model solution, first-order approximations for various performance quantities are proposed

Insulin Response Genes in Different Stages of Periodontal Disease

Bacterial infections are known to alter glucose metabolism within tissues via mechanisms of inflammation. We conducted this study to examine whether insulin response genes are differentially expressed in gingival tissues, comparing samples from experimental gingivitis and periodontitis subjects to those from healthy individuals. Total RNA was extracted from gingival biopsies from 26 participants: 8 periodontally healthy, 9 experimental gingivitis, and 9 periodontitis subjects. Gene expression patterns were evaluated with a polymerase chain reaction array panel to examine 84 candidate genes involved with glucose metabolism, insulin resistance, and obesity. Array data were evaluated with a t test adjusted by the false discover rate (P < 0.05), and ingenuity pathway analysis was performed for statistical testing of pathways. Although tissue samples were not sufficient to enable protein quantification, we confirmed the upregulation of the key gene using lipopolysaccharide-stimulated primary gingival epithelial cells by Western blot. The mRNA expression patterns of genes that are associated with insulin response and glucose metabolism are markedly different in experimental gingivitis subjects compared with healthy controls. Thirty-two genes are upregulated significantly by at least 2-fold, adjusted for false discover rate (P < 0.05). Periodontitis subjects show similar but attenuated changes in gene expression patterns, and no genes meet the significance criteria. Ingenuity pathway analysis demonstrates significant activation of the carbohydrate metabolism network in experimental gingivitis but not in periodontitis. G6PD protein increases in response to lipopolysaccharide stimulation in primary gingival epithelial cells, which is in the same direction as upregulated mRNA in tissues. Acute gingival inflammation may be associated with tissue metabolism changes, but these changes are not evident in chronic periodontitis. This study suggests that acute gingival inflammation may induce localized changes that modify tissue insulin/glucose metabolism

Finite Element Convergence for the Joule Heating Problem with Mixed Boundary Conditions

We prove strong convergence of conforming finite element approximations to the stationary Joule heating problem with mixed boundary conditions on Lipschitz domains in three spatial dimensions. We show optimal global regularity estimates on creased domains and prove a priori and a posteriori bounds for shape regular meshes.Comment: Keywords: Joule heating problem, thermistors, a posteriori error analysis, a priori error analysis, finite element metho