Novel Dual Walling Cob Building: Dynamic Thermal Performance

This paper emphasizes the experimental and numerical study of new cob mixes used for insulation and load bearing wall elements. The experimental study provides complete datasets of thermal properties of the new walling materials, using cob with density ranging from 1107 kg/m3 to 1583 kg/m3 for structural walls and less than 700 kg m−3 for insulation walls. Various mixes of French soils and fibres (reed, wheat straw, hemp shiv, hemp straw, and flax straw) with different water contents are studied. The lowest average thermal conductivity is obtained for the structural cob mix prepared of 5% wheat straw and 31% of water content. The insulation mix, prepared with 25% reed and 31% water content, has the lowest thermal conductivity. Investigation of diffusivity, density, and heat capacity shows that, when thermal conductivity is lower than 0.4 W m−1 K−1, the decrease in cob density leads to better insulation values and higher heat capacity. Little variation is noticed regarding the density and heat capacity for cob mixes with thermal conductivity higher than 0.4 W m−1 K−1. Furthermore, the non-uniformity of local thermal conductivity and heat losses through the samples is due mainly to the non-uniform distribution of fibres inside the mixes inducing an increase in heat loss up to 50% for structural walls and 25% for insulation walls. Cob thermal properties are used in a comparative simulation case study of a typical house under French and UK climatic conditions. The energy performance of the conventional building is compared to a dual walled cob building, showing remarkable reduction in energy consumption as the cob walls, whilst maintaining comfortable indoor conditions without additional heating.</jats:p

Comparison of the thermal performance between conventional and cob building

The appliance of sustainable development approach in building has urged construction industry to adopt proper measurements to protect environment and reduce residential building energy consumption and CO2 emissions. Thus, an increasing interest in alternative building materials has developed including the use of bio-based materials such as cob which is studied in this paper. In the previous work, many experimental and numerical studies have been carried out to characterize thermal behaviour of earth buildings, reduce its thermal conductivity and water content. In this paper, an experimental study is carried out to determine the thermal properties and energy performance of cob building. Cob samples within different soil and fiber contents are studied using an experimental set up instrumented with flux meters and micro-thermocouples in order to evaluate the local heat flux and thermal conductivity during stationary regime. The results are analysed and compared to deduce the performant mixes in terms of thermal behaviour while respecting the French thermal regulation. A static thermal simulation based on RT 2012 calculation method (the official French calculation method for the energy performance of new residential and commercial buildings according to France thermal regulation) is used to compare energy performance between conventional and cob building using the French climate data base

Feasibility Study of an Internet-Based Platform for Tele-Neuropsychological Assessment of Elderly in Remote Areas

Today, in rural isolated areas or so-called 'medical deserts', access to diagnosis and care is very limited. With the current pandemic crisis, now even more than ever, telemedicine platforms are gradually more employed for remote medical assessment. Only a few are tailored to comprehensive teleneuropsychological assessment of older adults. Hence, our study focuses on evaluating the feasibility of performing a remote neuropsychological assessment of older adults suffering from a cognitive complaint. 50 participants (aged 55 and older) were recruited at the local hospital of Digne-les-Bains, France. A brief neuropsychological assessment including a short clinical interview and several validated neuropsychological tests was administered in two conditions, once by Teleneuropsychology (TNP) and once by Face-to-Face (FTF) in a crossover design. Acceptability and user experience was assessed through questionnaires. Results show high agreement in most tests between the FTF and TNP conditions. The TNP was overall well accepted by the participants. However, differences in test performances were observed, which urges the need to validate TNP tests with broader samples with normative data

Is it time to revise the diagnostic criteria for apathy in brain disorders? the 2018 international consensus group

International audienceBackground. Apathy is a very common behavioural and psychological symptom across brain disorders. In the last decade, there have been considerable advances in research on apathy and motivation. It is thus important to revise the apathy diagnostic criteria published in 2009. The main objectives were to: a) revise the definition of apathy; b) update the list of apathy dimensions; c) operationalise the diagnostic criteria; and d) suggest appropriate assessment tools including new technologies.Methods. The expert panel (N=17) included researchers and health care professionals working on brain disorders and apathy, a representative of a regulatory body, and a representative of the pharmaceutical industry. The revised diagnostic criteria for apathy were developed in a two-step process. First, following the standard Delphi methodology, the experts were asked to answer questions via web-survey in two rounds. Second, all the collected information was discussed onthe occasion of the 26th European Congress of Psychiatry held in Nice (France).Results. Apathy was defined as a quantitative reduction of goal-directed activity in comparison to the patient’s previous level of functioning (criterion A). Symptoms must persist for at least four weeks, and affect at least two of the three apathy dimensions (behaviour/cognition; emotion; social interaction; criterion B). Apathy should cause identifiable functional impairments (criterion C), and should not be fully explained by other factors, such as effects of a substance or major changes in the patient’s environment.Conclusions. The new diagnostic criteria for apathy provide a clinical and scientific framework to increase the validity of apathy as a clinical construct. This should also help to pave the path for apathy in brain disorders to be an interventional target

Recommendations for the nonpharmacological treatment of apathy in brain disorders

Apathy is a common neuropsychiatric syndrome observed across many neurocognitive and psychiatric disorders. Although there are currently no definitive standard therapies for the treatment of apathy, nonpharmacological treatment (NPT) is often considered to be at the forefront of clinical management. However, guidelines on how to select, prescribe, and administer NPT in clinical practice are lacking. Furthermore, although new Information and Communication Technologies (ICT) are beginning to be employed in NPT, their role is still unclear. The objective of the present work is to provide recommendations for the use of NPT for apathy, and to discuss the role of ICT in this domain, based on opinions gathered from experts in the field. The expert panel included 20 researchers and healthcare professionals working on brain disorders and apathy. Following a standard Delphi methodology, experts answered questions via several rounds of web-surveys, and then discussed the results in a plenary meeting. The experts suggested that NPT are useful to consider as therapy for people presenting with different neurocognitive and psychiatric diseases at all stages, with evidence of apathy across domains. The presence of a therapist and/or a caregiver is important in delivering NPT effectively, but parts of the treatment may be performed by the patient alone. NPT can be delivered both in clinical settings and at home. However, while remote treatment delivery may be cost and time-effective, it should be considered with caution, and tailored based on the patient's cognitive and physical profile and living conditions