The first record of the Chinese pond mussel Sinanodonta woodiana (Lea, 1834) in Montenegro

Sinanodonta woodiana (Lea, 1834), Chinese pond mussel (Bivalvia: Unionoida: Unionidae) is one of the most invasive aquatic macroinvertebrate species found in Europe. We report the Chinese pond mussel for the first time in Montenegro, in August 2012, in Lake Šasko (Adriatic part of the Central Mediterranean subarea). One specimen of the Chinese pond mussel was observed in a habitat with a predominantly silt-clay substrate. The main pathway of species introduction was evaluated to be via fish stocking

Effect of the Position in the Build Chamber on the Fatigue Strength of Additively Manufactured Maraging Steel MS1

The quality of additively produced parts and the achievable mechanical response may be affected by several factors, such as build orientation, heat treatment, or machining. A further rarely investigated factor is the position of the built part in the chamber with respect to inert gas flow. Previous studies have highlighted that the interaction between gas flow and laser track may induce an intense vaporization with consequent lack of fusion, particle entrainment, drop in density and denudation of the produced part, which is likely to detrimentally affect mechanical properties. This study addresses the effect of part position on the fatigue strength of heat-treated maraging steel MS1 produced by an EOSINT M280 machine in a nitrogen environment. Novelty arises from the lack of studies in this field, especially under fatigue. A factorial plan with subsequent statistical analysis highlighted that positioning the part upstream with respect to the gas flow leads to a slightly lower fatigue strength; however, no significant differences are observed. The failure mode, involving initiation from subsurface porosities of the same size, is also unaffected. Finally, a fatigue limit of 26% of the ultimate tensile strength is found, which is consistent with previous outcomes

Techno-functional, textural and sensorial properties of frankfurters as affected by the addition of bee pollen powder

The objective of this study was to determine whether the addition of different pollen powder concentrations (0.5; 1.0 and 1.5 g/100 g) had an influence on techno-functional, textural and sensorial traits of frankfurters. Examining the techno-functional characteristics of pollen, a conclusion was reached that the higher the concentration, the higher the emulsification and better techno-functional properties. Also, FTIR-ATR analysis has shown that specific pollen molecules provided good emulsifying properties of sausages. On the other hand, sensory analysis showed that sausages with the addition of 1.0% and 1.5% of pollen powder have a more pronounced floral odor. Warner-Bratzler shear force test has shown that the incorporation of pollen caused a more stable product throughout sixty days of storage than the control sample. It could be explained by the formation of more protein-protein interactions due to the addition of non-meat proteins in the formulation of frankfurters and obtaining a more stable product than the control one. All things considered, it can be concluded that pollen exhibits good techno-functional properties and could be utilized in the formulation of frankfurters with improved and steady techno-functional properties during two months of refrigerated storage

Fatigue response of additively manufactured as-built 15-5 PH stainless steel and effects of machining and thermal and surface treatments

Additively produced 15-5 PH stainless steel has wide industrial applications, but the combined effects of heat treatment, machining, and shot-peening and their order have not been deeply investigated. This topic is addressed here by a 2-by-3 experimental plan that has involved S–N curve and fatigue limit determination, using vertically built cylindrical samples, tested under rotating bending. The obtained responses have been analyzed by an ANOVA-based statistical approach for comparison of fatigue trends. Results indicate that heat treatment without machining may be even detrimental for fatigue due to embrittlement. Conversely, machining with subsequent shot-peening, even without heat treatment, has a remarkable impact and leads to a doubled fatigue strength with respect to as-built material. This strength is also quite close to that achievable for wrought material. The study has been completed by micrography and fractography, to reveal the dependence of microstructure, crack initiation sites, and failure mode on the performed treatments

A rapid and reliable determination of doxycycline hyclate by HPLC with UV detection in pharmaceutical samples

An accurate, sensitive and reproducible high performance liquid chromatographic (HPLC) method for the quantification of doxycycline hyclate in pharmaceutical samples has been developed and validated. The drug and the standard were eluted from a Lichrosorb RP-8 (250 mm´4.6 mm, 10 mm particle size) at 20 °C with a mobile phase consisting of methanol, acetonitrile and 0.010 M aqueous solution of oxalic acid (2:3:5, v/v/v). The flow rate was 1.25 ml min-1. A UV detector set at 350 nm was used to monitor the effluent. Each analysis required no longer than 4 min. The limits of detection and quantification were 1.15 and 3.84 μg ml-1, respectively. Recoveries for different concentrations ranged from 99.58 to 101.93 %

Fatigue response of additively manufactured Maraging Stainless Steel CX and effects of heat treatment and surface finishing

This paper deals with the novel topic of the fatigue response of additively manufactured Maraging Stainless Steel CX. A two-by-two factorial plan was arranged, to experimentally assess the effects of heat treatment and machining on the fatigue strength in both finite and infinite life domains. The two factors were regarded as on–off, taking the untreated unmachined condition as a reference for comparisons. Cylindrical specimens with vertical build orientation were involved in the fatigue campaign under four-point rotating bending. The results indicate that the fatigue strength may be remarkably incremented (up to five times) with respect to the as received conditions, especially thanks to surface smoothing and taking advantage of a very low porosity level. Heat treatment strengthening mechanisms were also interpreted in the light of optical and electron microscope observations. Fatigue enhancement arises from precipitate size increment throughout the conducted heat treatment, although the fracture mode turns to be more brittle

A GENERALIZATION OF NIL-CLEAN RINGS

The conditions that allow an element of an associative, unital, not necessarily commutative ring R, to be represented as a sum of (commuting) idempotents and one nilpotent element are analyzed. Some applications to group rings are also presented

Non-Fermi liquid behavior of SrRuO_3 -- evidence from infrared conductivity

The reflectivity of the itinerant ferromagnet SrRuO_3 has been measured between 50 and 25,000 cm-1 at temperatures ranging from 40 to 300 K, and used to obtain conductivity, scattering rate, and effective mass as a function of frequency and temperature. We find that at low temperatures the conductivity falls unusually slowly as a function of frequency (proportional to \omega^{-1/2}), and at high temperatures it even appears to increase as a function of frequency in the far-infrared limit. The data suggest that the charge dynamics of SrRuO_3 are substantially different from those of Fermi-liquid metals.Comment: 4 pages, 3 postscript figure

Spectral evolution in (Ca,Sr)RuO_3 near the Mott-Hubbard transition

We investigated the optical properties of (Ca,Sr)RuO_3 films on the borderline of a metal-insulator (M-I) transition. Our results show all of the predicted characteristics for a metallic Mott-Hubbard system, including (i) a mass enhancement in dc-limit, (ii) an U/2 excitation, and (iii) an U excitation. Also, a self-consistency is found within the Gutzwiller-Brinkman-Rice picture for the Mott transition. Our finding displays that electron correlation should be important even in 4d materials.Comment: REVTEX 4 pages, 5 EPS figures, submitted to Phys. Rev. Let