Multiwavelength fiber laser based on bidirectional lyot filter in conjunction with intensity dependent loss mechanism

We experimentally demonstrate a multiwavelength fiber laser (MWFL) based on bidirectional Lyot filter. A semiconductor optical amplifier (SOA) is used as the gain medium, while its combination with polarization controllers (PCs) and polarization beam combiner (PBC) induces intensity dependent loss (IDL) mechanism. The IDL mechanism acts as an intensity equalizer to flatten the multiwavelength spectrum, which can be obtained at a certain polarization state. Using different ratio of optical splitter has affected to multiwavelength flatness degradation. Subsequently, when we removed a polarizer in the setup, the extinction ratio (ER) is decreased. Ultimately, with two segments of polarization maintaining fiber (PMF), two channel spacings can be achieved due to splicing shift of 0° and 90°

Simulation of sub-drains performance using visual MODFLOW for slope water seepage Problem

Numerical simulation technique was used for investigating water seepage problem at the Botanic Park Kuala Lumpur. A proposed sub-drains installation in problematic site location was simulated using Modular Three-Dimensional Finite Difference Groundwater Flow (MODFLOW) software. The results of simulation heads during transient condition showed that heads in between 43 m (water seepage occurred at level 2) until 45 m (water seepage occurred at level 4) which heads measurement are referred to mean sea level. However, elevations measurements for level 2 showed the values between 41 to 42 m from mean sea level and elevations for level 4 between 42 to 45 m from mean sea level. These results indicated an increase in heads for level 2 and level 4 between 1 to 2 m when compared to elevations slope at the level 2 and level 4. The head increases surpass the elevation level of the slope area that causing water seepage at level 2 and level 4. In order to overcome this problems, the heads level need to be decrease to 1 until 2 m by using two options of sub-drain dimension size. Sub-drain with the dimension of 0.0750 m (diameter), 0.10 m (length) and using 4.90 m spacing was the best method to use as it was able to decrease the heads to the required levels of 1 to 2 m

Simulation of sub-drains performance using visual MODFLOW for slope water seepage Problem

Numerical simulation technique was used for investigating water seepage problem at the Botanic Park Kuala Lumpur. A proposed sub-drains installation in problematic site location was simulated using Modular Three-Dimensional Finite Difference Groundwater Flow (MODFLOW) software. The results of simulation heads during transient condition showed that heads in between 43 m (water seepage occurred at level 2) until 45 m (water seepage occurred at level 4) which heads measurement are referred to mean sea level. However, elevations measurements for level 2 showed the values between 41 to 42 m from mean sea level and elevations for level 4 between 42 to 45 m from mean sea level. These results indicated an increase in heads for level 2 and level 4 between 1 to 2 m when compared to elevations slope at the level 2 and level 4. The head increases surpass the elevation level of the slope area that causing water seepage at level 2 and level 4. In order to overcome this problems, the heads level need to be decrease to 1 until 2 m by using two options of sub-drain dimension size. Sub-drain with the dimension of 0.0750 m (diameter), 0.10 m (length) and using 4.90 m spacing was the best method to use as it was able to decrease the heads to the required levels of 1 to 2 m

Cosmos caudatus Kunth. extract reduced number of microflora in oyster mushroom (Pleurotus ostreatus)

Nowadays consumer is more demand on natural foodstuff instead of synthetic product due to their concern on health. The objective of this study is to investigate the effect of C. caudatus extract on the number of microflora in oyster mushroom at different concentration of C. caudatus extract and exposure time using dilution method. The results showed that the number of microorganisms (Log10 CFU/g) in oyster mushroom in term of Total Plate Count (TPC), Bacillus cereus, Escherichia coli and Staphylococcus aureus were 6.13 ± 0.04, 6.15 ± 0.09, 5.97 ± 0.04, and 6.46 ± 0.00, respectively. The effect of C. caudatus extract on microflora in oyster mushroom at concentrations of 0.00%, 0.05%, 0.5%, and 5.0% with exposure time of 0, 5, 10, and 15 min demonstrated that the reduction number of microflora in oyster mushroom was dependent on the concentration of C. caudatus extract and exposure times. The number of TPC (Log10 CFU/g) in oyster mushroom was significantly reduced after treated with C. caudatus extract at concentration of 0.05% for 15 min; 6.13 ± 0.04 reduced to 2.62 ± 0.07. Moreover, B. cereus (Log10 CFU/g) in oyster mushroom was significantly reduced by treatment of C. caudatus extract at concentration of 0.05% for 5 min; 6.15 ± 0.09 reduced to 3.77 ± 0.15. Meanwhile, the number of E. coli (Log10 CFU/g) in oyster mushroom was significantly reduced at concentration of 0.05% for 10 min; 5.97 ± 0.04 reduced to 3.21 ± 0.13. Lastly, the survival number of S. aureus in oyster mushroom was significantly reduced after treated with C. caudatus extract at concentration of 0.05% for 15 min; 6.46 ± 0.00 reduced to 4.83 ± 0.07. In conclusion, C. caudatus extract has potentiality to be developed as natural sanitizer for rinsing raw food materials such as oyster mushroom

Performance Investigation of Dual Wavelength Fiber Laser using different SOAs

We investigated the performance of a dual wavelength fiber laser (DWFL) using different types of semiconductor optical amplifiers (SOAs) utilizing fiber Bragg gratings (FBGs) as comb filter. The lasing performances of linear SOA (LSOA), nonlinear SOA (NLSOA) and booster optical amplifier (BOA) at different current setting were observed. LSOA produced the flattest spectrum based on its peak power difference at only 4.5 dB as compared to 66.4 dB using BOA. BOA has the worst flatness because its polarization sensitivity is the highest as compared to LSOA and NLSOA. Overall, the best lasing performance is when LSOA is used due to the lowest peak power difference with high peak power at -17.6 dBm

An Electronically Reconfigurable Patch Antenna Design for Polarization Diversity with Fixed Resonant Frequency

In this paper, an electronically polarization reconfigurable circular patch antenna with fixed resonant frequency operating at Wireless Local Area Network (WLAN) frequency band (2.4-2.48 GHz) is presented. The structure of the proposed design consists of a circular patch as a radiating element fed by coaxial probe, cooperated with four equal-length slits etched on the edge along x-axis and y-axis. A total of four switches was used and embedded across the slits at specific locations, thus controlled the length of the slits. By activating and deactivating the switches (ON and OFF) across the slits, the current on the patch is changed, thus modifying the electric field and polarization of the antenna. Consequently, the polarization excited by the proposed antenna can be switched into three types, either linear polarization, left-hand circular polarization or right-hand circular polarization. This paper proposes a simple approach that able to switch the polarizations and excited at the same operating frequency. Simulated and measured results of ideal case (using copper strip switches) and real case (using PIN diode switches) are compared and presented to demonstrate the performance of the antenna

Antimicrobial activity of Cosmos caudatus extract against foodborne pathogens

The antimicrobial activity of Cosmos caudatus extract was evaluated against Bacillus cereus(ATCC 33019), Bacillus subtilis(ATCC 6633), Proteus mirabilis (ATCC 21100), Pseudomonas aeruginosa (ATCC 9027) and Candida albicans (ATCC 10231) using the methods as recommended by the Clinical and Laboratory Standard Institute (CLSI). The antimicrobial tests were conducted in term of susceptibility, minimum inhibitory concentration (MIC), minimum bactericidal/fungicidal concentration (MBC/MFC) and killing-time curve. The results showed that C. caudatus extract was susceptible against all tested pathogens; the inhibition zone ranged from 8.60 mm to 9.83 mm. The MIC and MBC/MFC values were ranged from 6.25 mg/ml-12.50 mg/ml and 12.50 mg/ml-50.00 mg/ml, respectively. Mean while, killing-time curves showed that C. caudatus extract can killed the B. cereus, B. subtilis, P. mirabilis, P. aeruginosa and C. albicans at concentration of 8 MIC for 2 h, 4 MIC for 2 h or 2 MIC for 2 h, 8 MIC for 4 h, 4 MIC for 0.5 h and 4 MIC for 1 h, as respectively. Findings indicated that C. caudatus extract has the potentiality to develop as a natural antimicrobial agent

Chemically treated chicken bone waste as an efficient adsorbent for removal of acetaminophen

Present of pharmaceutical as the emerging pollutants arise the concerns of environment community regarding the potential impact of acetaminophen (ACT) on ecological and human health. Adsorption process has been proven as an effective treatment being activated carbon as the adsorbent to remove many types of pollutant including low concentration of pollutants. However, on large scale industrial processes, utilisation of activated carbon is limited because of their high production cost. Synthesis of waste materials as a precursor of adsorbent is an attractive approach in sustainable management and economic availability. In this study, the removal of ACT from aqueous solution by chemically treated chicken bone (AC) waste was investigated. The adsorption process was conducted in a batch adsorption and affected by several experimental parameters including contact time, pH, adsorbent dose, initial concentration and temperature. With AC dosage of 0.1 g about 93 % of 1,000 mg/L ACT was removed from the aqueous solution that had pH of 2 and temperature of 25 °C. Kinetic of ACT adsorption was well described by pseudo-second order kinetic model. Meanwhile, effect of initial concentration of acetaminophen adsorption data was fitted well with Freundlich isotherm model with an R2 of 0.9909. Finally, the data obtained from effect of temperature was used to determine the adsorption thermodynamic including the enthalpy, ΔH, Gibbs energy, ΔG and entropy, ΔS. It was found that the ΔG was negative at all temperature while both, ΔH and ΔS was also negative between temperatures of 25 °C to 70 °C indicating the process of ACT adsorption was exothermic reaction and the adsorption reaction is spontaneous at low temperature

Generation of Q-switched thulium-doped fiber laser (TDFL) using differentsaturable absorbers

A Q-switched Thulium-doped Fiber Laser (TDFL) operating at approximately 2 µm wavelength is successfully generated by using four different saturable absorbers (SAs) which are nitrogen-doped graphene in PVA (NG:PVA), nitrogen-doped graphene in PEO (NG:PEO), single-walled carbon nanotube in PVA (SWCNT:PVA), and high pressure carbon monoxide carbon nanotube in PVA (CNTHiPCO:PVA). The SAs integrated in the cavity were able to provide the real saturable absorption in modulating the intra-cavity losses. SWCNT gives the best results with the highest repetition rate and lowest pulse width of 57.45 kHz and 1.958 nJ correspondingly as compared to the other three SAs

Simulation of U-shaped plastic optical fiber ethanol sensor

The prediction of optical loss in different bending diameter of U-shaped POF sensor towardvariation of ethanol’s refractive indices was investigated using ray-tracing method perform byZemax software. It can provide information on how the propagation ray is perturbed bydifferent bending diameter of U-shaped POF. There are five designs of POF models werepre-drawn with different bending diameter; 2.0cm, 2.5cm, 3.0cm 3.5cm and 4.0cm. From theresults, U-shaped with 2.5 cm bending diameter has shown the most sensitive bendingdiameter as compared to the rest. Either with the presence of cladding layer or not thesensitivity detected was 0.014 x10-4 Watts/Vol%Keywords: ray-tracing; Zemax software; U-shaped POF sensor; ethanol sensor