1,427 research outputs found
Quality Assurance Testing for Screening Defective Aluminum Die-cast Rotors of Squirrel Cage Induction Machines
Off-line Flux Injection Test Probe for Screening Defective Rotors in Squirrel Cage Induction Machines
Increase of organic solvent tolerance of Escherichia coli by the deletion of two regulator genes, fadR and marR
The improvement of bacterial tolerance to organic solvents is a main prerequisite for the microbial production of biofuels which are toxic to cells. For targeted genetic engineering of Escherichia coli to increase organic solvent tolerances (OSTs), we selected and investigated a total of 12 genes that participate in relevant mechanisms to tolerance. In a spot assay of 12 knockout mutants with n-hexane and cyclohexane, the genes fadR and marR were finally selected as the two key genes for engineering. Fatty acid degradation regulon (FadR) regulates the biosynthesis and degradation of fatty acids coordinately, and the multiple antibiotic resistance repressor (MarR) is the repressor of the global regulator MarA for multidrug resistance. In the competitive growth assay, the ΔmarR mutant became dominant when the pooled culture of 11 knockout mutants was cultivated successively in the presence of organic solvent. The increased OSTs in the ΔmarR and ΔfadR mutants were confirmed by a growth experiment and a viability test. The even more highly enhanced OSTs in the ΔfadR ΔmarR double mutant were shown compared with the two single mutants. Cellular fatty acid analysis showed that the high ratio of saturated fatty acids to unsaturated fatty acids plays a crucial role in OSTs. Furthermore, the intracellular accumulation of OST strains was significantly decreased compared with the wild-type strain
Effect of an Ethanol Extract of Scutellaria baicalensis on Relaxation in Corpus Cavernosum Smooth Muscle
Aims of study. The aim of the present study was to investigate whether an ethanol extract of Scutellaria baicalensis (ESB) relaxes penile corpus cavernosum muscle in organ bath experiments. Materials and methods. Changes in tension of cavernous smooth muscle strips were determined by penile strip chamber model and in penile perfusion model. Isolated endothelium-intact rabbit corpus cavernosum was precontracted with phenylephrine (PE) and then treated with ESB. Results. ESB relaxed penile smooth muscle in a dose-dependent manner, and this was inhibited by pre-treatment with NG-nitro-l-arginine methyl ester (l-NAME), a nitric oxide (NO) synthase inhibitor, and 1H-[1, 2, 4]-oxadiazolo-[4,3-α]-quinoxalin-1-one (ODQ), a soluble guanylyl cyclase (sGC) inhibitor. ESB-induced relaxation was significantly attenuated by pretreatment with tetraethylammonium (TEA), a nonselective K+ channel blocker, and charybdotoxin, a selective Ca2+-dependent K+ channel inhibitor. ESB increased the cGMP levels of rabbit corpus cavernosum in a concentration-dependent manner without changes in cAMP levels. In a perfusion model of penile tissue, ESB also relaxed penile corpus cavernosum smooth muscle in a dose-dependent manner. Conclusion. Taken together, these results suggest that ESB relaxed rabbit cavernous smooth muscle via the NO/cGMP system and Ca2+-sensitive K+ channels in the corpus cavernosum
Goal-Setting Learning Principles: a Lesson From Practitioner
One of the prominent theory was the goal-setting theory which was widely been used in educational setting. It is an approach than can enhance the teaching and learning activities in the classroom. This is a report paper about a simple study of the implementation of the goal-setting principle in the classroom. A clinical data of the teaching and learning session was then analysed to address several issues highlighted. It is found that the goal-setting principles if understood clearly by the teachers can enhance the teaching and learning activities. Failed to see the needs of the session will revoke the students learning interest. It is suggested that goal-setting learning principles could become a powerful aid for the teachers in the classroom
A new measles mumps rubella (MMR) vaccine: a randomized comparative trial for assessing the reactogenicity and immunogenicity of three consecutive production lots and comparison with a widely used MMR vaccine in measles primed children
AbstractObjectives: A multicenter, single-blind, randomized, controlled clinical study was conducted in healthy 15–18-month-old children in order to assess the immunogenicity and reactogenicity of three consecutive lots of a new measles-mumps-rubella (MMR) vaccine, GSK MMR.Design: A total of 500 enrolled subjects were randomized into four groups to receive either a single dose of one of the three lots of GSK MMR (three groups — 125 subjects in each group) or Merck MMR vaccine (125 subjects). Once clinical consistency had been demonstrated, the data were pooled and compared with the widely used Merck vaccine. Solicited local and general symptoms were recorded using diary cards, and antibody levels were determined using ELISA assays.Results: No differences in the incidence of local and general symptoms or seroconversion rates were seen in the groups receiving different lots of GSK MMR. Compared with Merck MMR, there was a significantly lower incidence of local pain (P<0.001) and swelling (P=0.038) in infants receiving the GSK MMR vaccine. The incidences of all other solicited local and general symptoms were comparable between the two groups. No signs of suspected meningitis were reported. No serious adverse events were reported by the investigator to be related to vaccination. Equivalent seroconversion rates and post-vaccination GMTs were observed in the groups receiving the two MMR vaccines. In conclusion, the new GSK MMR vaccine administered in measles-primed children demonstrated satisfactory immunogenicity and safety profiles as good as the Merck MMR vaccine
Effect of a multi-layer infection control barrier on the micro-hardness of a composite resin
OBJECTIVE: The aim of this study was to evaluate the effect of multiple layers of an infection control barrier on the micro-hardness of a composite resin. MATERIAL AND METHODS: One, two, four, and eight layers of an infection control barrier were used to cover the light guides of a high-power light emitting diode (LeD) light curing unit (LCU) and a low-power halogen LCU. The composite specimens were photopolymerized with the LCUs and the barriers, and the micro-hardness of the upper and lower surfaces was measured (n=10). The hardness ratio was calculated by dividing the bottom surface hardness of the experimental groups by the irradiated surface hardness of the control groups. The data was analyzed by two-way ANOVA and Tukey's HSD test. RESULTS: The micro-hardness of the composite specimens photopolymerized with the LED LCU decreased significantly in the four- and eight-layer groups of the upper surface and in the two-, four-, and eight-layer groups of the lower surface. The hardness ratio of the composite specimens wa
Physical properties and biological effects of mineral trioxide aggregate mixed with methylcellulose and calcium chloride
Objectives: Methylcellulose (MC) is a chemical compound derived from cellulose. MTA mixed with MC reduces setting time and increases plasticity. This study assessed the influence of MC as an anti-washout ingredient and CaCl2 as a setting time accelerator on the physical and biological properties of MTA. Material and Methods: Test materials were divided into 3 groups; Group 1(control): distilled water; Group 2: 1% MC/CaCl2; Group 3: 2% MC/CaCl2. Compressive strength, pH, flowability and cell viability were tested. The gene expression of bone sialoprotein (BSP) was detected by RT-PCR and real time PCR. The expression of alkaline phosphatase (ALP) and mineralization behavior were evaluated using an ALP staining and an alizarin red staining. Results: Compressive strength, pH, and cell viability of MTA mixed with MC/CaCl2 were not significantly different compared to the control group. The flowability of MTA with MC/CaCI2 has decreased significantly when compared to the control (
Thermal analysis of bulk filled composite resin polymerization using various light curing modes according to the curing depth and approximation to the cavity wall
OBJECTIVE: The purpose of this study was to investigate the polymerization temperature of a bulk filled composite resin light-activated with various light curing modes using infrared thermography according to the curing depth and approximation to the cavity wall. MATERIAL AND METHODS: Composite resin (AeliteFlo, Bisco, Schaumburg, IL, USA) was inserted into a Class II cavity prepared in the Teflon blocks and was cured with a LED light curing unit (Dr's Light, GoodDoctors Co., Seoul, Korea) using various light curing modes for 20 s. Polymerization temperature was measured with an infrared thermographic camera (Thermovision 900 SW/TE, Agema Infra-red Systems AB, Danderyd, Sweden) for 40 s at measurement spots adjacent to the cavity wall and in the middle of the cavity from the surface to a 4 mm depth. Data were analyzed according to the light curing modes with one-way ANOVA, and according to curing depth and approximation to the cavity wall with two-way ANOVA. RESULTS: The peak polymerization temperature of the composite resin was not affected by the light curing modes. According to the curing depth, the peak polymerization temperature at the depth of 1 mm to 3 mm was significantly higher than that at the depth of 4 mm, and on the surface. The peak polymerization temperature of the spots in the middle of the cavity was higher than that measured in spots adjacent to the cavity wall. CONCLUSION: In the photopolymerization of the composite resin, the temperature was higher in the middle of the cavity compared to the outer surface or at the internal walls of the prepared cavity
- …