A Fully Computerized Method to Backup the Router Configuration File

This paper presents a fully computerized method to backup the router configuration file. The method consists of a friendly graphical interface programmed by Java programming language The proposed method is compared with the two existing methods, namely: TFTP server method and Copy/Paste method. The comparison reveals that the proposed method has many advantages over the existing ones. The proposed method has been implemented on Cisco routers (series 2500, 2600 and 2800

Simple Fall Criteria for MEMS Sensors: Data Analysis and Sensor Concept

This paper presents a new and simple fall detection concept based on detailed experimental data of human falling and the activities of daily living (ADLs). Establishing appropriate fall algorithms compatible with MEMS sensors requires detailed data on falls and ADLs that indicate clearly the variations of the kinematics at the possible sensor node location on the human body, such as hip, head, and chest. Currently, there is a lack of data on the exact direction and magnitude of each acceleration component associated with these node locations. This is crucial for MEMS structures, which have inertia elements very close to the substrate and are capacitively biased, and hence, are very sensitive to the direction of motion whether it is toward or away from the substrate. This work presents detailed data of the acceleration components on various locations on the human body during various kinds of falls and ADLs. A two-degree-of-freedom model is used to help interpret the experimental data. An algorithm for fall detection based on MEMS switches is then established. A new sensing concept based on the algorithm is proposed. The concept is based on employing several inertia sensors, which are triggered simultaneously, as electrical switches connected in series, upon receiving a true fall signal. In the case of everyday life activities, some or no switches will be triggered resulting in an open circuit configuration, thereby preventing false positive. Lumped-parameter model is presented for the device and preliminary simulation results are presented illustrating the new device concept

A piecewise-linear reduced-order model of squeeze-film damping for deformable structures including large displacement effects

This paper presents a reduced-order model for the Reynolds equation for deformable structure and large displacements. It is based on the model established in [11] which is piece-wise linearized using two different methods. The advantages and drawbacks of each method are pointed out. The pull-in time of a microswitch is determined and compared to experimental and other simulation data.Comment: Submitted on behalf of EDA Publishing Association (http://irevues.inist.fr/handle/2042/16838

Difference frequency generation by quasi-phase matching in periodically intermixed semiconductor superlattice waveguides

Wavelength conversion by difference frequency generation is demonstrated in domain-disordered quasi-phase-matched waveguides. The waveguide structure consisted of a GaAs/AlGaAs superlattice core that was periodically intermixed by ion implantation. For quasi-phase-matching periods of 3.0–3.8 μm, degeneracy pump wavelengths were found by second-harmonic generation experiments for fundamental wavelengths between 1520 and 1620 nm in both type-I and type-II configurations. In the difference frequency generation experiments, output powers up to 8.7 nW were generated for the type-I phase matching interaction and 1.9 nW for the type-II interaction. The conversion bandwidth was measured to be over 100 nm covering the C, L, and U optical communications bands, which agrees with predictions

A Strategy for Automatic Quality Signing and Verification Processes for Hardware and Software Testing

We propose a novel strategy to optimize the test suite required for testing both hardware and software in a production line. Here, the strategy is based on two processes: Quality Signing Process and Quality Verification Process, respectively. Unlike earlier work, the proposed strategy is based on integration of black box and white box techniques in order to derive an optimum test suite during the Quality Signing Process. In this case, the generated optimal test suite significantly improves the Quality Verification Process. Considering both processes, the novelty of the proposed strategy is the fact that the optimization and reduction of test suite is performed by selecting only mutant killing test cases from cumulating t-way test cases. As such, the proposed strategy can potentially enhance the quality of product with minimal cost in terms of overall resource usage and time execution. As a case study, this paper describes the step-by-step application of the strategy for testing a 4-bit Magnitude Comparator Integrated Circuits in a production line. Comparatively, our result demonstrates that the proposed strategy outperforms the traditional block partitioning strategy with the mutant score of 100% to 90%, respectively, with the same number of test cases

Analyzing the Resilience of Convolutional Neural Networks Implemented on GPUs: Alexnet as a Case Study

There have been an extensive use of Convolutional Neural Networks (CNNs) in healthcare applications. Presently, GPUs are the most prominent and dominated DNN accelerators to increase the execution speed of CNN algorithms to improve their performance as well as the Latency. However, GPUs are prone to soft errors. These errors can impact the behaviors of the GPU dramatically. Thus, the generated fault may corrupt data values or logic operations and cause errors, such as Silent Data Corruption. unfortunately, soft errors propagate from the physical level (microarchitecture) to the application level (CNN model). This paper analyzes the reliability of the AlexNet model based on two metrics: (1) critical kernel vulnerability (CKV) used to identify the malfunction and light- malfunction errors in each kernel, and (2) critical layer vulnerability (CLV) used to track the malfunction and light-malfunction errors through layers. To achieve this, we injected the AlexNet which was popularly used in healthcare applications on NVIDIA’s GPU, using the SASSIFI fault injector as the major evaluator tool. The experiments demonstrate through the average error percentage that caused malfunction of the models has been reduced from 3.7% to 0.383% by hardening only the vulnerable part with the overhead only 0.2923%. This is a high improvement in the model reliability for healthcare applications

Jump and pull-in dynamics of an electrically actuated bistable MEMS device

This study analyzes a theoretical bistable MEMS device, which exhibits a considerable versatility of behavior. After exploring the coexistence of attractors, we focus on each rest position, and investigate the final outcome, when the electrodynamic voltage is suddenly applied. Our aim is to describe the parameter range where each attractor may practically be observed under realistic conditions, when an electric load is suddenly applied. Since disturbances are inevitably encountered in experiments and practice, a dynamical integrity analysis is performed in order to take them into account. We build the integrity charts, which examine the practical vulnerability of each attractor. A small integrity enhances the sensitivity of the system to disturbances, leading in practice either to jump or to dynamic pull-in. Accordingly, the parameter range where the device, subjected to a suddenly applied load, can operate in safe conditions with a certain attractor is smaller, and sometimes considerably smaller, than in the theoretical predictions. While we refer to a particular case-study, the approach is very general

The Effect of Time-Delay Feedback Controller on an Electrically Actuated Resonator

This paper presents a study of the effect of a time-delay feedback controller on the dynamics of a Microelectromechanical systems (MEMS) capacitor actuated by DC and AC voltages. It is shown that negative time-delay feedback control gain can lead to an unstable system, even if AC voltage is relatively small compared to DC voltage. Perturbation method is utilized to present analytically the nonlinear dynamic characteristics of the MEMS capacitor. Agreements among the results of a shooting technique, long-time integration, basin of attraction analysis with the perturbation method are achieved

Diffusion of knowledge and behaviours among trainee doctors in an acute medical unit and implications for quality improvement work: a mixed methods social network analysis

Abstract: Objectives: To describe the social networks that diffuse knowledge, attitudes and behaviours relating to different domains of practice within teams of trainee doctors in an acute hospital medical setting. The domains examined were “clinical-technical”, “patient centeredness” and “organisation of work”. Design: Sequential mixed methods: i) sociocentric survey of trainee consisting of questions about which colleagues are emulated or looked to for advice, with construction of social network maps, followed by ii) semi structured interviews regarding per to peer influence, analysed using a grounded theory approach. The study took place over 24 months. Setting: An acute medical admissions unit, which receives admissions from the emergency department and primary care, in a NHS England teaching hospital. Participants: Trainee medical doctors working in five consecutive rotational teams. Surveys were done by 39 trainee doctors; then 20 different participants from a maximal diversity sample were interviewed. Results: Clinical-technical behaviours spread in a dense network with rich horizontal peer to peer connections. Patient centred behaviours spread in a sparse network. Approaches to non-patient facing work are seldom copied from colleagues. Highly influential individuals for clinical technical memes were identified; high influencers were not identified for the other domains. Conclusion: Information and influence relating to different aspects of practice have different patterns of spread within teams of trainee doctors; highly influential individuals were important only for spread of clinical-technical practice. Influencers have particular characteristics, and this knowledge could guide leaders and teachers

Magnetoelastic Beam with Extended Polymer For Low Frequency Vibration Energy Harvesting

Ambient energy in the form of mechanical kinetic energy is mostly considered waste energy. The process of scavenging and storing such energy is known as energy harvesting. Energy harvesting from mechanical vibration is performed using resonant energy harvesters (EH) with two major goals: enhancing the power scavenged at low frequency sources of vibrations, and increasing the efficiency of scavenging energy by increasing the bandwidth near the resonant frequency. Toward such goals, we propose a piezoelectric EH of a composite cantilever beam with a tip magnet facing another magnet at a distance. The composite cantilever consists of a piezoelectric bimorph with an extended polymer material. With the effect of the nonlinearity of the magnetic force, higher amplitude can be achieved because of the generated bi-stability oscillations of the cantilever beam under harmonic excitation. The contribution of the this paper is to demonstrate lowering the achieved resonant frequency down to 17 Hz compared to 100 Hz for the piezoelectric bimorph beam without the extended polymer. Depending on the magnetic distance, the beam responses are divided to mono and bi-stable regions, for which we investigate static and dynamic behaviors. The dynamics of the system and the frequency and voltage responses of the beam are obtained using the shooting metho