Exact Interior Reconstruction from Truncated Limited-Angle Projection Data

Using filtered backprojection (FBP) and an analytic continuation approach, we prove that exact interior reconstruction is possible and unique from truncated limited-angle projection data, if we assume a prior knowledge on a subregion or subvolume within an object to be reconstructed. Our results show that (i) the interior region-of-interest (ROI) problem and interior volume-of-interest (VOI) problem can be exactly reconstructed from a limited-angle scan of the ROI/VOI and a 180 degree PI-scan of the subregion or subvolume and (ii) the whole object function can be exactly reconstructed from nontruncated projections from a limited-angle scan. These results improve the classical theory of Hamaker et al. (1980)

Local ROI Reconstruction via Generalized FBP and BPF Algorithms along More Flexible Curves

We study the local region-of-interest (ROI) reconstruction problem, also referred to as the local CT problem. Our scheme includes two steps: (a) the local truncated normal-dose projections are extended to global dataset by combining a few global low-dose projections; (b) the ROI are reconstructed by either the generalized filtered backprojection (FBP) or backprojection-filtration (BPF) algorithms. The simulation results show that both the FBP and BPF algorithms can reconstruct satisfactory results with image quality in the ROI comparable to that of the corresponding global CT reconstruction

A General Local Reconstruction Approach Based on a Truncated Hilbert Transform

Exact image reconstruction from limited projection data has been a central topic in the computed tomography (CT) field. In this paper, we present a general region-of-interest/volume-of-interest (ROI/VOI) reconstruction approach using a truly truncated Hilbert transform on a line-segment inside a compactly supported object aided by partial knowledge on one or both neighboring intervals of that segment. Our approach and associated new data sufficient condition allows the most flexible ROI/VOI image reconstruction from the minimum account of data in both the fan-beam and cone-beam geometry. We also report primary numerical simulation results to demonstrate the correctness and merits of our finding. Our work has major theoretical potentials and innovative practical applications

Study on characteristics of particulate emission of diesel aftertreatment with reciprocating flow

© 2021 The Authors. Energy Science & Engineering published by the Society of Chemical Industry and John Wiley & Sons Ltd. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited. https://creativecommons.org/licenses/by/4.0/In this article, in order to optimize diesel aftertreatment system with periodically reciprocating flow (PRF), an experimental study is conducted to investigate its characteristics such as pollution emissions, regeneration of diesel particulate filter (DPF), concentration and size distribution of particulate matter (PM) escaped as well as temperature distribution under unidirectional flow and PRF operating conditions. The effects of reciprocating flow cycle and exhaust gas flow on the performance of aftertreatment system are investigated in detail. The energy efficiency analysis of the aftertreatment system is also carried out. Experimental results show that (i) as the temperature is lower than the light-off threshold of combustible gas, the aftertreatment system cannot restrain the formation of second particles under the present experiment condition of unidirectional flow; (ii) the aftertreatment system demonstrates excellent performance of trapping particles and filter regeneration as the symmetrical temperature distribution is formed. The PM filter efficiency α_PM is 92% and the specific energy consumption β is 124% for symmetrical temperature distribution; (iii) the increase of reciprocating flow cycle could lead to the shifting of the temperature profiles, this would affect the particle size distribution; (iv) a certain increase of exhaust gas flow from engine would have insignificant change for the temperature distribution; (v) The critical energy efficiency η_c of the system could reach 96.61%.Peer reviewedFinal Published versio

Acoustic Holographic Rendering with Two-dimensional Metamaterial-based Passive Phased Array.

Acoustic holographic rendering in complete analogy with optical holography are useful for various applications, ranging from multi-focal lensing, multiplexed sensing and synthesizing three-dimensional complex sound fields. Conventional approaches rely on a large number of active transducers and phase shifting circuits. In this paper we show that by using passive metamaterials as subwavelength pixels, holographic rendering can be achieved without cumbersome circuitry and with only a single transducer, thus significantly reducing system complexity. Such metamaterial-based holograms can serve as versatile platforms for various advanced acoustic wave manipulation and signal modulation, leading to new possibilities in acoustic sensing, energy deposition and medical diagnostic imaging

Photoflexoelectric effect in halide perovskites

Harvesting environmental energy to generate electricity is a key scientific and technological endeavour of our time. Photovoltaic conversion and electromechanical transduction are two common energy-harvesting mechanisms based on, respectively, semiconducting junctions and piezoelectric insulators. However, the different material families on which these transduction phenomena are based complicate their integration into single devices. Here we demonstrate that halide perovskites, a family of highly efficient photovoltaic materials, display a photoflexoelectric effect whereby, under a combination of illumination and oscillation driven by a piezoelectric actuator, they generate orders of magnitude higher flexoelectricity than in the dark. We also show that photoflexoelectricity is not exclusive to halides but a general property of semiconductors that potentially enables simultaneous electromechanical and photovoltaic transduction and harvesting in unison from multiple energy inputs

Human polyomavirus 6 and 7 are associated with pruritic and dyskeratotic dermatoses

ABSTRACT Background: Human Polyomavirus 6 (HPyV6) and Human Polyomavirus 7 (HPyV7) are shed chronically from human skin. HPyV7, but not HPyV6, has been linked to a pruritic skin eruption of immunosuppression. Objective: We determined whether biopsies showing a characteristic pattern of dyskeratosis and parakeratosis might be associated with polyomavirus infection. Methods: We screened biopsies showing "peacock plumage" histology by PCR for human polyomaviruses. Cases positive for HPyV 6 or 7 were then analyzed by immunohistochemistry, electron microscopy (EM), immunofluorescence, quantitative PCR, and complete sequencing, including unbiased, next generation sequencing (NGS). Results: We identified three additional cases of HPyV6 or 7 skin infections. Expression of T antigen and viral capsid was abundant in lesional skin. Dual immunofluorescence staining experiments confirmed that HPyV7 primarily infects keratinocytes. High viral loads in lesional skin compared to normal skin and the identification of intact virions by both EM and NGS support a role for active viral infections in these skin diseases. Limitation: This was a small case-series of archived materials. Conclusion: We have found that HPyV6 and HPyV7 are associated with rare, pruritic skin eruptions with a unique histologic pattern and describe this entity as "HPyV6- and HPyV7-associated pruritic and dyskeratotic dermatosis (H6PD and H7PD).