REFLECT : logiciel de restitution des réflectances au sol pour l’amélioration de la qualité de l'information extraite des images satellitales à haute résolution spatiale

Les images satellitales multispectrales, notamment celles à haute résolution spatiale (plus fine que 30 m au sol), représentent une source d’information inestimable pour la prise de décision dans divers domaines liés à la gestion des ressources naturelles, à la préservation de l’environnement ou à l’aménagement et la gestion des centres urbains. Les échelles d’étude peuvent aller du local (résolutions plus fines que 5 m) à des échelles régionales (résolutions plus grossières que 5 m). Ces images caractérisent la variation de la réflectance des objets dans le spectre qui est l’information clé pour un grand nombre d’applications de ces données. Or, les mesures des capteurs satellitaux sont aussi affectées par des facteurs « parasites » liés aux conditions d’éclairement et d’observation, à l’atmosphère, à la topographie et aux propriétés des capteurs. Deux questions nous ont préoccupé dans cette recherche. Quelle est la meilleure approche pour restituer les réflectances au sol à partir des valeurs numériques enregistrées par les capteurs tenant compte des ces facteurs parasites ? Cette restitution est-elle la condition sine qua non pour extraire une information fiable des images en fonction des problématiques propres aux différents domaines d’application des images (cartographie du territoire, monitoring de l’environnement, suivi des changements du paysage, inventaires des ressources, etc.) ? Les recherches effectuées les 30 dernières années ont abouti à une série de techniques de correction des données des effets des facteurs parasites dont certaines permettent de restituer les réflectances au sol. Plusieurs questions sont cependant encore en suspens et d’autres nécessitent des approfondissements afin, d’une part d’améliorer la précision des résultats et d’autre part, de rendre ces techniques plus versatiles en les adaptant à un plus large éventail de conditions d’acquisition des données. Nous pouvons en mentionner quelques unes : - Comment prendre en compte des caractéristiques atmosphériques (notamment des particules d’aérosol) adaptées à des conditions locales et régionales et ne pas se fier à des modèles par défaut qui indiquent des tendances spatiotemporelles à long terme mais s’ajustent mal à des observations instantanées et restreintes spatialement ? - Comment tenir compte des effets de « contamination » du signal provenant de l’objet visé par le capteur par les signaux provenant des objets environnant (effet d’adjacence) ? ce phénomène devient très important pour des images de résolution plus fine que 5 m; - Quels sont les effets des angles de visée des capteurs hors nadir qui sont de plus en plus présents puisqu’ils offrent une meilleure résolution temporelle et la possibilité d’obtenir des couples d’images stéréoscopiques ? - Comment augmenter l’efficacité des techniques de traitement et d’analyse automatique des images multispectrales à des terrains accidentés et montagneux tenant compte des effets multiples du relief topographique sur le signal capté à distance ? D’autre part, malgré les nombreuses démonstrations par des chercheurs que l’information extraite des images satellitales peut être altérée à cause des tous ces facteurs parasites, force est de constater aujourd’hui que les corrections radiométriques demeurent peu utilisées sur une base routinière tel qu’est le cas pour les corrections géométriques. Pour ces dernières, les logiciels commerciaux de télédétection possèdent des algorithmes versatiles, puissants et à la portée des utilisateurs. Les algorithmes des corrections radiométriques, lorsqu’ils sont proposés, demeurent des boîtes noires peu flexibles nécessitant la plupart de temps des utilisateurs experts en la matière. Les objectifs que nous nous sommes fixés dans cette recherche sont les suivants : 1) Développer un logiciel de restitution des réflectances au sol tenant compte des questions posées ci-haut. Ce logiciel devait être suffisamment modulaire pour pouvoir le bonifier, l’améliorer et l’adapter à diverses problématiques d’application d’images satellitales; et 2) Appliquer ce logiciel dans différents contextes (urbain, agricole, forestier) et analyser les résultats obtenus afin d’évaluer le gain en précision de l’information extraite par des images satellitales transformées en images des réflectances au sol et par conséquent la nécessité d’opérer ainsi peu importe la problématique de l’application. Ainsi, à travers cette recherche, nous avons réalisé un outil de restitution de la réflectance au sol (la nouvelle version du logiciel REFLECT). Ce logiciel est basé sur la formulation (et les routines) du code 6S (Seconde Simulation du Signal Satellitaire dans le Spectre Solaire) et sur la méthode des cibles obscures pour l’estimation de l’épaisseur optique des aérosols (aerosol optical depth, AOD), qui est le facteur le plus difficile à corriger. Des améliorations substantielles ont été apportées aux modèles existants. Ces améliorations concernent essentiellement les propriétés des aérosols (intégration d’un modèle plus récent, amélioration de la recherche des cibles obscures pour l’estimation de l’AOD), la prise en compte de l’effet d’adjacence à l’aide d’un modèle de réflexion spéculaire, la prise en compte de la majorité des capteurs multispectraux à haute résolution (Landsat TM et ETM+, tous les HR de SPOT 1 à 5, EO-1 ALI et ASTER) et à très haute résolution (QuickBird et Ikonos) utilisés actuellement et la correction des effets topographiques l’aide d’un modèle qui sépare les composantes directe et diffuse du rayonnement solaire et qui s’adapte également à la canopée forestière. Les travaux de validation ont montré que la restitution de la réflectance au sol par REFLECT se fait avec une précision de l’ordre de ±0.01 unités de réflectance (pour les bandes spectrales du visible, PIR et MIR), même dans le cas d’une surface à topographie variable. Ce logiciel a permis de montrer, à travers des simulations de réflectances apparentes à quel point les facteurs parasites influant les valeurs numériques des images pouvaient modifier le signal utile qui est la réflectance au sol (erreurs de 10 à plus de 50%). REFLECT a également été utilisé pour voir l’importance de l’utilisation des réflectances au sol plutôt que les valeurs numériques brutes pour diverses applications courantes de la télédétection dans les domaines des classifications, du suivi des changements, de l’agriculture et de la foresterie. Dans la majorité des applications (suivi des changements par images multi-dates, utilisation d’indices de végétation, estimation de paramètres biophysiques, …), la correction des images est une opération cruciale pour obtenir des résultats fiables. D’un point de vue informatique, le logiciel REFLECT se présente comme une série de menus simples d’utilisation correspondant aux différentes étapes de saisie des intrants de la scène, calcul des transmittances gazeuses, estimation de l’AOD par la méthode des cibles obscures et enfin, l’application des corrections radiométriques à l’image, notamment par l’option rapide qui permet de traiter une image de 5000 par 5000 pixels en 15 minutes environ. Cette recherche ouvre une série de pistes pour d’autres améliorations des modèles et méthodes liés au domaine des corrections radiométriques, notamment en ce qui concerne l’intégration de la FDRB (fonction de distribution de la réflectance bidirectionnelle) dans la formulation, la prise en compte des nuages translucides à l’aide de la modélisation de la diffusion non sélective et l’automatisation de la méthode des pentes équivalentes proposée pour les corrections topographiques.Multi-spectral satellite imagery, especially at high spatial resolution (finer than 30 m on the ground), represents an invaluable source of information for decision making in various domains in connection with natural resources management, environment preservation or urban planning and management. The mapping scales may range from local (finer resolution than 5 m) to regional (resolution coarser than 5m). The images are characterized by objects reflectance in the electromagnetic spectrum witch represents the key information in many applications. However, satellite sensor measurements are also affected by parasite input due to illumination and observation conditions, to the atmosphere, to topography and to sensor properties. Two questions have oriented this research. What is the best approach to retrieve surface reflectance with the measured values while taking into account these parasite factors? Is this retrieval a sine qua non condition for reliable image information extraction for the diverse domains of application for the images (mapping, environmental monitoring, landscape change detection, resources inventory, etc.)? Researches performed in the past 30 years have yielded a series of techniques to correct the parasite factors among which some allow to retrieve ground reflectance. Some questions are still unanswered and others require still more scrutiny to increase precision and to make these methods more versatile by adapting them to larger variety of data acquisition conditions. A few examples may be mentioned: - How to take into account atmospheric characteristics (particularly of aerosols) adapted to local and regional conditions instead of relying on default models indicating long term spatial-temporal trends that are hard to adjust to spatially restricted instantaneous observations; - How to remove noise introduced by surrounding objects. This adjacency effect phenomenon is particularly important for image resolutions smaller than 5m; - What is the effect of the viewing angle of the sensors that are increasingly aiming off-nadir, a choice imposed by the imperatives of a better temporal resolution or the acquisition of stereo pairs? - How to increase the performances of automatic multi-spectral image processing and analysis techniques in mountainous high relief area by taking into account the multiple effects of topography on the remotely sensed signal? Despite many demonstrations by researchers that information extracted from remote sensing may be altered due to the parasite factors, we are forced to note that nowadays radiometric corrections are still seldom applied, unlike geometric corrections for which commercial software possess powerful and versatile user-friendly algorithms. Radiometric correction algorithms, when available, are hard to adapt black boxes and mostly require experts to operate them. The goals we have delineated for this research are as follow: 1) Develop software to retrieve ground reflectance while taking into account the aspects mentioned earlier. This software had to be modular enough to allow improvement and adaptation to diverse remote sensing application problems; and 2) Apply this software in various context (urban, agricultural, forest) and analyse results to evaluate the accuracy gain of extracted information from remote sensing imagery transformed in ground reflectance images to demonstrate the necessity of operating in this way, whatever the type of application. During this research, we have developed a tool to retrieve ground reflectance (the new version of the REFLECT software). This software is based on the formulas (and routines) of the 6S code (Second Simulation of Satellite Signal in the Solar Spectrum) and on the dark targets method to estimated the aerosol optical thickness, representing the most difficult factor to correct. Substantial improvements have been made to the existing models. These improvements essentially concern the aerosols properties (integration of a more recent model, improvement of the dark targets selection to estimate the AOD), the adjacency effect, the adaptation to most used high resolution (Landsat TM and ETM+, all HR SPOT 1 to 5, EO-1 ALI and ASTER) and very high resolution (QuickBird et Ikonos) sensors and the correction of topographic effects with a model that separate direct and diffuse solar radiation components and the adaptation of this model to forest canopy. Validation has shown that ground reflectance estimation with REFLECT is performed with an accuracy of approximately ±0.01 in reflectance units (for in the visible, near-infrared and middle-infrared spectral bands) even for a surface with varying topography. This software has allowed demonstrating, through apparent reflectance simulations, how much parasite factors influencing numerical values of the images may alter the ground reflectance (errors ranging from 10 to 50%). REFLECT has also been used to examine the usefulness of ground reflectance instead of raw data for various common remote sensing applications in domains such as classification, change detection, agriculture and forestry. In most applications (multi-temporal change monitoring, use of vegetation indices, biophysical parameters estimation, etc.) image correction is a crucial step to obtain reliable results. From the computer environment standpoint, REFLECT is organized as a series of menus, corresponding to different steps of: input parameters introducing, gas transmittances calculation, AOD estimation, and finally image correction application, with the possibility of using the fast option witch process an image of 5000 by 5000 pixels in approximately 15 minutes. This research opens many possible pathways for improving methods and models in the realm of radiometric corrections of remotely sensed images. In particular, these include BRDF integration in the formulation, cirrus clouds correction using non selective scattering modelling and improving of the equivalent slopes topographic correction method

Deep Learning-Based Classification of Large-Scale Airborne LiDAR Point Cloud

Airborne LiDAR data allow the precise modeling of topography and are used in multiple contexts. To facilitate further analysis, the point cloud classification process allows the assignment of a class, object or feature, to each point. This research uses ConvPoint, a deep learning method, to perform airborne point cloud classification at scale, in rural and urban contexts. Specifically, our experiments are located near Montreal (QC) and Saint-Jean (NB) and our approach is designed to classify five classes; we used “Building”, “Ground”, “Water”, “Low Vegetation” and “Mid-High Vegetation”. Experimenting with different configurations, we achieved excellent Intersection-over-Union results for the “Mid-High Vegetation” (93%) and “Building” (86%) classes on both datasets and provide insights to improve processing times as well as accuracy

Synthetic Data for Sentinel-2 Semantic Segmentation

Satellite observations provide critical data for a myriad of applications, but automated information extraction from such vast datasets remains challenging. While artificial intelligence (AI), particularly deep learning methods, offers promising solutions for land cover classification, it often requires massive amounts of accurate, error-free annotations. This paper introduces a novel approach to generate a segmentation task dataset with minimal human intervention, thus significantly reducing annotation time and potential human errors. ‘Samples’ extracted from actual imagery were utilized to construct synthetic composite images, representing 10 segmentation classes. A DeepResUNet was solely trained on this synthesized dataset, eliminating the need for further fine-tuning. Preliminary findings demonstrate impressive generalization abilities on real data across various regions of Quebec. We endeavored to conduct a quantitative assessment without reliance on manually annotated data, and the results appear to be comparable, if not superior, to models trained on genuine datasets

Ground Reflectance Retrieval on Horizontal and Inclined Terrains Using the Software Package REFLECT

This paper presents the software package REFLECT for the retrieval of ground reflectance from high and very-high resolution multispectral satellite images. The computation of atmospheric parameters is based on the 6S (Second Simulation of the Satellite Signal in the Solar Spectrum) routines. Aerosol optical properties are calculated using the OPAC (Optical Properties of Aerosols and Clouds) model, while aerosol optical depth is estimated using the dark target method. A new approach is proposed for adjacency effect correction. Topographic effects were also taken into account, and a new model was developed for forest canopies. Validation has shown that ground reflectance estimation with REFLECT is performed with an accuracy of approximately ±0.01 in reflectance units (for the visible, near-infrared, and mid-infrared spectral bands), even for surfaces with varying topography. The validation of the software was performed through many tests. These tests involve the correction of the effects that are associated with sensor calibration, irradiance, and viewing conditions, atmospheric conditions (aerosol optical depth AOD and water vapour), adjacency, and topographic conditions

Deep Learning-Based Emulation of Radiative Transfer Models for Top-of-Atmosphere BRDF Modelling Using Sentinel-3 OLCI

The Bidirectional Reflectance Distribution Function (BRDF) defines the anisotropy of surface reflectance and plays a fundamental role in many remote sensing applications. This study proposes a new machine learning-based model for characterizing the BRDF. The model integrates the capability of Radiative Transfer Models (RTMs) to generate simulated remote sensing data with the power of deep neural networks to emulate, learn and approximate the complex pattern of physical RTMs for BRDF modeling. To implement this idea, we used a one-dimensional convolutional neural network (1D-CNN) trained with a dataset simulated using two widely used RTMs: PROSAIL and 6S. The proposed 1D-CNN consists of convolutional, max poling, and dropout layers that collaborate to establish a more efficient relationship between the input and output variables from the coupled PROSAIL and 6S yielding a robust, fast, and accurate BRDF model. We evaluated the proposed approach performance using a collection of an independent testing dataset. The results indicated that the proposed framework for BRDF modeling performed well at four simulated Sentinel-3 OLCI bands, including Oa04 (blue), Oa06 (green), Oa08 (red), and Oa17 (NIR), with a mean correlation coefficient of around 0.97, and RMSE around 0.003 and an average relative percentage error of under 4%. Furthermore, to assess the performance of the developed network in the real domain, a collection of multi-temporals OLCI real data was used. The results indicated that the proposed framework has a good performance in the real domain with a coefficient correlation (R2), 0.88, 0.76, 0.7527, and 0.7560 respectively for the blue, green, red, and NIR bands

Deep Learning-Based Emulation of Radiative Transfer Models for Top-of-Atmosphere BRDF Modelling Using Sentinel-3 OLCI

The Bidirectional Reflectance Distribution Function (BRDF) defines the anisotropy of surface reflectance and plays a fundamental role in many remote sensing applications. This study proposes a new machine learning-based model for characterizing the BRDF. The model integrates the capability of Radiative Transfer Models (RTMs) to generate simulated remote sensing data with the power of deep neural networks to emulate, learn and approximate the complex pattern of physical RTMs for BRDF modeling. To implement this idea, we used a one-dimensional convolutional neural network (1D-CNN) trained with a dataset simulated using two widely used RTMs: PROSAIL and 6S. The proposed 1D-CNN consists of convolutional, max poling, and dropout layers that collaborate to establish a more efficient relationship between the input and output variables from the coupled PROSAIL and 6S yielding a robust, fast, and accurate BRDF model. We evaluated the proposed approach performance using a collection of an independent testing dataset. The results indicated that the proposed framework for BRDF modeling performed well at four simulated Sentinel-3 OLCI bands, including Oa04 (blue), Oa06 (green), Oa08 (red), and Oa17 (NIR), with a mean correlation coefficient of around 0.97, and RMSE around 0.003 and an average relative percentage error of under 4%. Furthermore, to assess the performance of the developed network in the real domain, a collection of multi-temporals OLCI real data was used. The results indicated that the proposed framework has a good performance in the real domain with a coefficient correlation (R2), 0.88, 0.76, 0.7527, and 0.7560 respectively for the blue, green, red, and NIR bands

Economic Benefit of Coastal ‘Blue Carbon’ Stocks in Moroccan Lagoon Ecosystem: A Case Study From Moulay Bousselham lagoon

Abstract Land degradation is a problem that increasingly affects large areas of territories and affects various ecosystem services provided by coastal wetlands. These marine ecosystems provide valuable benefits to the environment and to humans, including services such as coastal blue carbon sequestration (CBCS) the economic value of which is still poorly understood. This paper investigated land use/cover (LULC) changes in Moulay Bousselham lagoon (MBL) from 1971 to 2020 and their effects on CBCS variation. The transformation of LULC and their cumulative conversions in coastal wetlands were studied during the 1971-2010 and 2010-2020 periods based on LULC data. Then the InVEST model was used to quantify the carbon storage provided by coastal ecosystems in response to LULC changes. The results show that the overall area of strictly wetland habitats in the MBL has decreased by 8.83% since 1971. There were 94 types of LULC transformation over 1971-2020, with significant wetland losses marked by the conversion of wet lawn and juncus meadow to cropland. Using recent estimates of social cost of carbon (SCC) and CO 2 European Emission Allowances (EUA), the monetary value of CBCS service was calculated over the entire lagoon during the study period to reach gains between 371,053 and 3,803,295US$/y and losses between -10,127 and -103,806US$/y. If current trends of habitat loss continue, the capacity of coastal habitats to sequester and store CO 2 will be significantly reduced. The study shows that revenues from CBCS service can accelerate the implementation of wetland rehabilitation strategies that have a positive impact on climate regulation

Corn response to nitrogen is influenced by soil texture and weather

Citation: Tremblay, Nicolas, Yacine M. Bouroubi, Carl Bélec, Robert William Mullen, Newell R. Kitchen, Wade E. Thomason, Steve Ebelhar, et al. “Corn Response to Nitrogen Is Influenced by Soil Texture and Weather.” Agronomy Journal 104, no. 6 (2012): 1658–71. https://doi.org/10.2134/agronj2012.0184.Soil properties and weather conditions are known to affect soil nitrogen (N) availability and plant N uptake. However, studies examining N response as affected by soil and weather sometimes give conflicting results. Meta-analysis is a statistical method for estimating treatment effects in a series of experiments to explain the sources of heterogeneity. In this study, the technique was used to examine the influence of soil and weather parameters on N responses of corn (Zea mays L.) across 51 studies involving the same N rate treatments which were carried out in a diversity of North American locations between 2006 and 2009. Results showed that corn response to added N was significantly greater in fine-textured soils than in medium-textured soils. Abundant and well-distributed rainfall and, to a lesser extent, accumulated corn heat units enhanced N response. Corn yields increased by a factor of 1.6 (over the unfertilized control) in medium-textured soils and 2.7 in fine-textured soils at high N rates. Subgroup analyses were performed on the fine-textured soil class based on weather parameters. Rainfall patterns had an important effect on N response in this soil texture class, with yields being increased 4.5-fold by in-season N fertilization under conditions of “abundant and well-distributed rainfall.” These findings could be useful for developing N fertilization algorithms that would allow for N application at optimal rates taking into account rainfall pattern and soil texture, which would lead to improved crop profitability and reduced environmental impacts