2,055 research outputs found
Experimental and numerical studies of the effects of a rail vibration absorber on suppressing short pitch rail corrugation
The effects of a rail vibration absorber on suppressing short pitch rail corrugation are studied. Firstly, a rail vibration field test is carried out to analyze the vibration response of the rail with and without the vibration absorbers. Secondly, based on the hypothesis that friction-induced self-excited vibration of a wheel-rail system causes rail corrugation; two finite element models of a wheel-rail system and a wheel-rail-absorber system are established and analyzed. Both sets of rail vibration test results and theoretical results show that the rail absorbers can effectively reduce the friction-induced self-excited vibration of the wheel-rail system in the frequency range of 200-800 Hz, which corresponds to frequencies of short pitch rail corrugation. This may be a main reason that the rail vibration absorber can suppress the formation of short pitch rail corrugation
A preventive control strategy for static voltage stability based on an efficient power plant model of electric vehicles
Biocompatible FeOOH-Carbon quantum dots nanocomposites for gaseousNOx removal under visible light: Improved charge separation and Highselectivity
Development of biocompatible photocatalysts with improved charge separation and high selectivity is essential for effective removal of air pollutants. Iron-containing catalysts have attracted extensive attention due to their low-toxicity and high natural abundance. Here, carbon quantum dots (CQDs) modified FeOOH nanocomposites fabricated using a facile hydrothermal route showed enhanced NO removal efficiency (22%) compared to pure FeOOH. Moreover, generation of toxic NO2 intermediates was significantly inhibited using the nanocomposites, demonstrating high selectivity for final nitrate formation. Photo-electrochemical results showed that both charge separation and transfer efficiency were significantly improved by CQDs addition, and the lifetime of photo-generated carriers was increased eventually. Density functional theory calculations further elucidated that the suppressed recombination of photo-induced electron-hole pairs was due to enhanced electron migration from the FeOOH to CQDs. A NO degradation mechanism was proposed based on detection of the reactive oxygen species using electron paramagnetic spectroscopy. In addition, the nanocomposite showed good biocompatibility and low cytotoxity, ensuring minimal environmental impact for potential application in large-scale.</span
Field Emission Properties and Fabrication of CdS Nanotube Arrays
A large area arrays (ca. 40 cm2) of CdS nanotube on silicon wafer are successfully fabricated by the method of layer-by-layer deposition cycle. The wall thicknesses of CdS nanotubes are tuned by controlling the times of layer-by-layer deposition cycle. The field emission (FE) properties of CdS nanotube arrays are investigated for the first time. The arrays of CdS nanotube with thin wall exhibit better FE properties, a lower turn-on field, and a higher field enhancement factor than that of the arrays of CdS nanotube with thick wall, for which the ratio of length to the wall thickness of the CdS nanotubes have played an important role. With increasing the wall thickness of CdS nanotube, the enhancement factorβdecreases and the values of turn-on field and threshold field increase
In situ preparation of fluorescent CdTe quantum dots with small thiols and hyperbranched polymers as co-stabilizers
Template Route to Chemically Engineering Cavities at Nanoscale: A Case Study of Zn(OH)2 Template
A size-controlled Zn(OH)2 template is used as a case study to explain the chemical strategy that can be executed to chemically engineering various nanoscale cavities. Zn(OH)2 octahedron with 8 vertices and 14 edges is fabricated via a low temperature solution route. The size can be tuned from 1 to 30 μm by changing the reaction conditions. Two methods can be selected for the hollow process without loss of the original shape of Zn(OH)2 template. Ion-replacement reaction is suitable for fabrication of hollow sulfides based on the solubility difference between Zn(OH)2 and products. Controlled chemical deposition is utilized to coat an oxide layer on the surface of Zn(OH)2 template. The abundant hydroxyl groups on Zn(OH)2 afford strong coordination ability with cations and help to the coating of a shell layer. The rudimental Zn(OH)2 core is eliminated with ammonia solution. In addition, ZnO-based heterostructures possessing better chemical or physical properties can also be prepared via this unique templating process. Room-temperature photoluminescence spectra of the heterostructures and hollow structures are also shown to study their optical properties
Observation of a ppb mass threshoud enhancement in \psi^\prime\to\pi^+\pi^-J/\psi(J/\psi\to\gamma p\bar{p}) decay
The decay channel
is studied using a sample of events collected
by the BESIII experiment at BEPCII. A strong enhancement at threshold is
observed in the invariant mass spectrum. The enhancement can be fit
with an -wave Breit-Wigner resonance function with a resulting peak mass of
and a
narrow width that is at the 90% confidence level.
These results are consistent with published BESII results. These mass and width
values do not match with those of any known meson resonance.Comment: 5 pages, 3 figures, submitted to Chinese Physics
Monsoon versus Uplift in Southwestern China–Late Pliocene Climate in Yuanmou Basin, Yunnan
Yuanmou Basin of Yunnan, SW China, is a famous locality with hominids, hominoids, mammals and plant fossils. Based on the published megaflora and palynoflora data from Yuanmou Basin, the climate of Late Pliocene is reconstructed using the Coexistence Approach. The results indicate a warm and humid subtropical climate with a mean annual temperature of ca. 16–17°C and a mean annual precipitation of ca. 1500–1600 mm in the Late Pliocene rather than a dry, hot climate today, which may be due to the local tectonic change and gradual intensification of India monsoon. The comparison of Late Pliocene climate in Eryuan, Yangyi, Longling, and Yuanmou Basin of Yunnan Province suggests that the mean annual temperatures generally show a latitudinal gradient and fit well with their geographic position, while the mean annual precipitations seem to be related to the different geometries of the valleys under the same monsoon system
The Characteristics of Blood Glucose and WBC Counts in Peripheral Blood of Cases of Hand Foot and Mouth Disease in China: A Systematic Review
Background: Outbreaks of Hand Foot and Mouth Disease (HFMD) have occurred in many parts of the world especially in China. We aimed to summarize the characteristics of the levels of blood glucose and white blood cell (WBC) counts in cases of HFMD in Mainland China and Taiwan, using meta-analysis based on systematic review of published articles. Methods: We systematically reviewed published studies, from the MEDLINE and WANFANG Data, about the levels of blood glucose and WBC counts in cases of HFMD until 15 th June 2011, and quantitatively summarized the characteristics of them using meta-analysis. Results: In total, 37 studies were included in this review. In Mainland China and Taiwan, generally, the average level of blood glucose, the prevalence of hyperglycemia, WBC counts and the prevalence of leukocytosis increased with the severity of the illness. There was no significant difference in the prevalence of leukocytosis between ANS (autonomic nervous system dysregulation)/PE (pulmonary edema) group and CNS (central nervous system) group, and in the average level of blood glucose between healthy controls and mild cases of HFMD. WBC counts in cases infected by EV71 were less than those in cases infected by CA16. Conclusions: our analyses indicated that blood glucose and WBC counts increased with the severity of HFMD disease, which would help doctors to manage patients efficiently
- …