3,570 research outputs found
Recommended from our members
Defining Nafion Ionomer Roles for Enhancing Alkaline Oxygen Evolution Electrocatalysis
The electrocatalytic oxygen evolution reaction (OER) is not strictly a surface reaction, because it takes place in a thin hydrous electrical double layer (EDL). In this work, we perform an in-depth study of Nafion ionomer functions in both catalyst inks and catalyst layers (CL) for high-efficiency OER in alkaline media. Based on cyclic voltammetry results, an analysis method is developed to characterize pseudocapacitance and EDL charging capacitance independently. This enables accurate quantification of interfacial charge transport behavior and active sites for OER. Zeta potential measurements confirm that Nafion ionomer serves as a stabilizing and binding agent in catalyst-solvent inks. The data obtained from the half-cell tests in 1 M KOH reveal that increasing ionomer content in CL reduces OER performance due to higher mass transport resistance and less active sites. The sample with I/C = 1/24 (weight ratio of Nafion ionomer to IrOx catalyst) exhibits an approximately 1.7-times higher OER activity than that of I/C = 2/1. Furthermore, the ionomer blocking effect is found to be a common phenomenon, which was observed in a wide range of catalyst loadings and three different catalyst materials. Nevertheless, as demonstrated by Nafion-free samples, the addition of Nafion is indispensable for efficient catalyst utilization. Our study shows that the optimized ionomer content in the CL is 10-30 wt % of catalyst loading. Within this range, Nafion, catalyst particles, and electrolyte solution form efficient interaction, resulting in good connectivity of the charge conduction paths without inhibiting the gas diffusion
A phased array antenna employing reconfigurable defected microstrip structure (RDMS)
© 2015 IEEE. In this paper, a compact phase-shifting unit based on reconfigurable defected microstrip structure (RDMS) is used to provide controllable phase shift for a 1×4 phased array antenna. The RDMS is made by etching two slots on the microstrip line and loading with PIN diodes. By controlling the working states of the employed PIN diodes, the RDMS is able to provide phase shift. A 1×4 phased array antenna is built employing optimized RDMS. The tested results show that the antenna can work in the frequency band from 5.1-5.4 GHz, and switch its beam to -15°, 0°, and 15° in the H-plane with the average gain of 10 dBi. Compared to our previous work, significantly size reduction of 55% is achieved with similar performance
Deduced probable HLA-B*40:01:35-associated HLA haplotype (A*24-B*40:01:35-DRB1*11) found in a Taiwanese unrelated hematopoietic bone marrow stem cell donor
AbstractObjectiveHuman leukocyte antigen (HLA)-B*40:01:35 is a low incidence allele in the HLA-B locus. The objective of this study is to report the ethnicity of B*40:01:35 and its deduced probable HLA associated haplotype in a Taiwanese unrelated bone marrow hematopoietic stem cell donor.Materials and methodsA sequence-based typing method was employed to confirm the low incidence allele B*40:01:35. Polymerase chain reaction was performed to amplify exons 2 and 3 of the HLA-A and HLA-B loci and exon 2 of the HLA-DRB1 locus using group-specific primer sets. The amplicons were sequenced using the BigDye Terminator Cycle Sequencing Ready Reaction kit in both directions according to the manufacturer's protocols.ResultsThe DNA sequence of B*40:01:35 is identical to B*40:01:01 in exons 2 and 3, except for residue 324 where C is changed to T (codon 84, TAC→TAT). The nucleotide exchange does not cause amino acid alteration to the protein sequence of B*40:01:01 due to the silent mutation. We deduced the probable HLA haplotype in association with B*40:01:35 in Taiwanese to be A*24-B*40:01:35-DRB1*11.ConclusionInformation on the deduced probable HLA haplotype in association with the low incidence B*40:01:35 allele that we report here is of value for HLA testing laboratories for reference purposes. In addition, it can be used by stem cell transplantation donor search coordinators to determine a strategy for finding compatible donors in unrelated bone marrow donor registries when a patient has this uncommon HLA allele
Aqcostic quantification and colour kinesis: evaluation of left atrial and left ventricular function in real time
published_or_final_versio
Environmental factors and mortality risks associated influenza
BACKGROUND AND AIMS: The subtropical and tropical regions exhibit a distinct seasonality of influenza incidence from the temperate regions, and the mechanism behind it remains unclear. Environmental factors have been related to the transmission and survival of influenza viruses but no studies have ever explored the role of environmental factors on regulating severity of influenza infection. METHODS: We applied a Poisson regression model to the mortality data of two Asian metropolitan cities located at the subtropical zone, Guangzhou and Hong Kong. Interaction between …postprin
Density-functional study of LixMoS2 intercalates (0<=x<=1)
The stability of Lithium intercalated 2H- and 1T allotropes of Molybdenum
disulfide (LixMoS2) is studied within a density-functional theory framework as
function of the Li content (x) and the intercalation sites. Octahedral
coordination of Li interstitials in the van der Waals gap is found as the most
favorite for both allotropes. The critical content of Lithium, required for the
initialization of a 2H->1T phase transition is estimated to x ~ 0.4. For
smaller Li contents the hexagonal 2H crystal structure is not changed, while
1T-LixMoS2 compounds adopt a monoclinic lattice. All allotropic forms of
LixMoS2 - excluding the monoclinic Li1.0MoS2 structure - show metallic-like
character. The monoclinic Li1.0MoS2 is a semiconductor with a band gap of 1.1
eV. Finally, the influence of Li intercalation on the stability of multiwalled
MoS2 nanotubes is discussed within a phenomenological model.Comment: submitted to Comput.Mater.Sc
Establishing production service system and information collaboration platform for mold and die products
This paper investigates how the new concept of product service systems can be used and extended to transform, elevate, and revitalize traditional equipment manufacturing industry such as the Mold and Die (MD) sector. A mold and die production service systems (MPSS) framework is established based on recent developments within our industrial collaborators. Within the MPSS framework, MD manufacturers become more specialized in producing MD products and components while sharing and outsourcing manufacturing-oriented services (MOS) from a service provider. Typical services include collaborative order pooling and release, collaborative project progress status tracking, contractor-managed collaborative outsourcing, collaborative product design, collaborative production planning and scheduling, and after-sales technical supports. MOSs are designed, developed, and deployed as SaaS (software as application services) following the service-oriented architecture. Collectively, they form iMPSS-an Information and Collaboration Platform that enables MPSS. The use of iMPSS leads to benefits for stakeholders involved in providing mold and die functionality including better shopfloor decisions and reduced IT investments. © 2010 The Author(s).published_or_final_versionSpringer Open Choice, 21 Feb 201
Genetic diversity among Toxoplasma gondii isolates from different hosts and geographical locations revealed by analysis of ROP13 gene sequences
Toxoplasma gondii can infect almost all the warm-blooded animals and human beings, causing serious public health problems and economic losses worldwide. Rhoptry protein 13 (ROP13) plays some roles in the invasion process of T. gondii. In this study, sequence variation in ROP13 gene among 14 T. gondii isolates from different geographical locations and hosts was examined. The ROP13 gene was amplified from individual isolates and sequenced. Results show that the length of the ROP13 sequences was 1203 bp. In total, there were 44 variable nucleotide positions in the ROP13 sequences, and sequence variations were 0.1 to 2.0% among the 14 examined T. gondii isolates, representing higher rate in transversion than in transition. Intra-specific nucleotide variations were mainly at the second codon positions. Phylogenetic analysis of the 14 examined T. gondii isolates indicate that the ROP13 sequence was not a suitable genetic marker to differentiate T. gondii isolates of different genotypes from different hosts and geographical regions. Low variation in ROP13 gene sequence may suggest that ROP13 gene could represent a good vaccine candidate against toxoplasmosis.Key words: Toxoplasma gondii, toxoplasmosis, rhpotry protein 13 (ROP13), sequence variation, phylogenetic analysis
ONLINE FLOW-INJECTION COBALT-AMMONIUM PYRROLIDIN-1-YLDITHIOFORMATE COPRECIPITATION FOR PRECONCENTRATION OF TRACE AMOUNTS OF METALS IN WATERS WITH SIMULTANEOUS DETERMINATION BY INDUCTIVELY-COUPLED PLASMA-ATOMIC EMISSION-SPECTROMETRY
The technique of on-line flow injection (FI) cobalt-ammonium pyrrolidin-1-yldithioformate (Co-APDC) coprecipitation for the preconcentration of trace amounts of the heavy metals Cd, Cu, Fe, Ni, Pb and Zn in rain water samples with simultaneous determination by inductively coupled plasma atomic emission spectrometry (KP-AES) has been developed. A precipitate collector system, consisting of a poly(tetrafluoroethylene) (PTFE) membrane on a polypropylene support filtering device combined with a 1.5 m reaction coil, was selected. An inorganic solution of concentrated nitric acid and hydrogen peroxide was applied as the dissolution reagent. The technique is characterized by high retention efficiency (which ranged from 77 to 99% for the six elements of interest), good enrichment factors (ranging from 10 to 50 for 100 s preconcentration depending on the elements studied) and satisfactory accuracy and precision (recoveries from two standard additions to a rain sample ranged from 92 to 104%, with relative standard deviations ranging from 1.9 to 5%). The sample throughput is 20 per hour
Inner Space Preserving Generative Pose Machine
Image-based generative methods, such as generative adversarial networks
(GANs) have already been able to generate realistic images with much context
control, specially when they are conditioned. However, most successful
frameworks share a common procedure which performs an image-to-image
translation with pose of figures in the image untouched. When the objective is
reposing a figure in an image while preserving the rest of the image, the
state-of-the-art mainly assumes a single rigid body with simple background and
limited pose shift, which can hardly be extended to the images under normal
settings. In this paper, we introduce an image "inner space" preserving model
that assigns an interpretable low-dimensional pose descriptor (LDPD) to an
articulated figure in the image. Figure reposing is then generated by passing
the LDPD and the original image through multi-stage augmented hourglass
networks in a conditional GAN structure, called inner space preserving
generative pose machine (ISP-GPM). We evaluated ISP-GPM on reposing human
figures, which are highly articulated with versatile variations. Test of a
state-of-the-art pose estimator on our reposed dataset gave an accuracy over
80% on PCK0.5 metric. The results also elucidated that our ISP-GPM is able to
preserve the background with high accuracy while reasonably recovering the area
blocked by the figure to be reposed.Comment: http://www.northeastern.edu/ostadabbas/2018/07/23/inner-space-preserving-generative-pose-machine
- …