Strain-rate effect on the dynamic behaviours of a rectangular conducting plate

This paper is concerned with thermo-elasto-plastic dynamic response of a conductive plate in a magnetic pulse field. The influence of the strain rate effect and the temperature effect are taken into account for the electromagnetic elasto-plastic dynamic transient response and deformation of the conductive plate which made of strain-rate sensitive materials. The Johnson-Cook model is employed to study the strain rate effect and the temperature effect on the deformation of the plate. Basic governing equations are derived for electro-magnetic field considering the eddy current. The analysis includes the elastoplastic transient dynamic response and the heat transfer of a conductive rectangular plate, and then an appropriate numerical code based on the finite element method to quantitatively simulate the electro-magneto-elasto-plastic mechanical behaviors of the conductive rectangular plate. The numerical results indicate that the strain rate effect has to be considered for the conductive plates, especially for those with high strain rate sensitivity. Comparison of the influence of the temperature effect on the deformation of the plate with that of the strain rate effect shows that the influence of the temperature effect on the deformation of a plate is not significant

Presence of Meaning in Life Improves Response to Others’ Self-Promotion

Self-promotion is prevalent and aversive. We observe that people who think their life is meaningful tend to experience less negative emotional responses to others’ self-promotional attempts. A simple intervention involving a reflection on the presence of meaning in one’s life significantly improves recipients’ responses to others’ self-promotion

Cloud for Gaming

Cloud for Gaming refers to the use of cloud computing technologies to build large-scale gaming infrastructures, with the goal of improving scalability and responsiveness, improve the user's experience and enable new business models.Comment: Encyclopedia of Computer Graphics and Games. Newton Lee (Editor). Springer International Publishing, 2015, ISBN 978-3-319-08234-

On the Statistical Distribution of Epidermal Papillomata in Mice

IN a previous investigation reported from this laboratory (Ball and McCarter, 1960) it was noted that tumours produced in the skin of the CFW mouse by treatment with 7,12-dimethylbenz(a)anthracene (DMBA) and croton oil, were not distributed among the mice in accordance with the expected Poisson's distribution. Animals bearing no tumours and those bearing many were much more numerous than expected. A quantitative analysis of induced primary adenomatous pulmonary tumours in mice was reported by Polissar and Shimkin (1954). They showed that the occurrence of such tumours was subject to Poisson's distribution and that deviations from this distribution could be attributed to heterogeneity of susceptibility in the animals. We have now analyzed the data obtained in our laboratory in three populations of mice undergoing epidermal carcinogenesis. MATERIALS AND METHODS Strain CFW.-These mice were females, purchased from Carworth Farms Inc., New City, New York. They were housed in groups of 10 in acrylic plastic boxes with stainless steel tops. The bedding was sawdust. Water and Purina Fox Chow Cubes were freely available. Strain CFW/D.-This strain originated when, through error, a male was included among the female CFW mice purchased from the supplier in 1958. Since that time, brother-sister mating has been carried out with a view to obtaining a single inbred line. Litters selected for brother-sister mating were chosen on the basis of health, number in the litter and even distribution of the sexes and not for sensitivity to carcinogenesis. The mice were in the thirteenth and fourteenth inbred generations when used. They were cared for as described above. Strain I.-This strain was obtained several years ago through the kindness of Dr. H. B. Andervont. The mice had been mated brother-to-sister for 71 to 72 generations when the experiment was begun. Chemicals. 7,1 2-dimethylbenz(a)anthracene and benzo((a)pyrene were obtained from Eastman Organic Chemicals. Croton oil was obtained from Bush and Co., Canada. Paraffin oil viscosity 125/135 NF was a product of Fisher Scientific Co., Montreal, Canada. Meprobamate (Miltown) was kindly supplied by Dr. F. M

Electronic density of states derived from thermodynamic critical field curves for underdoped La-Sr-Cu-O

Thermodynamic critical field curves have been measured for $La_{2-x}Sr_{x}CuO_{4+\delta}$ over the full range of carrier concentrations where superconductivity occurs in order to determine changes in the normal state density of states with carrier concentration. There is a substantial window in the $H-T$ plane where the measurements are possible because the samples are both thermodynamically reversible and the temperature is low enough that vortex fluctuations are not important. In this window, the data fit Hao-Clem rather well, so this model is used to determine $H_c$ and $\kappa_c$ for each temperature and carrier concentration. Using N(0) and the ratio of the energy gap to transition temperature, $\Delta (0)/k_BT_c$, as fitting parameters, the $H_c vs T$ curves give $\Delta (0)/k_BT_c \sim 2.0$ over the whole range of $x$. Values of N(0) remain rather constant in the optimum-doped and overdoped regime, but drops quickly toward zero in the underdoped regime.

Vortex fluctuations in superconducting La-Sr-Cu-O

Vortex fluctuations in the $La_{2-x}Sr_{x}CuO_{4+\delta}$ system have been studied as a function of magnetic field, temperature and carrier concentration in order to determine the dimensionality of the fluctuations. For a $x=0.10$ sample, there is a unique crossing-temperature on the magnetization vs. temperature plots for all magnetic fields up to 7 T, and the data scale very well with 2D fluctuation theory. At lower x-values where $H_{c2}$ is much smaller, there are two well defined crossing points, one at low fields (typically less than 1 T) and another at high fields (typically 3-7 T). A fit of the data to fluctuation theory shows that the low field crossing data scale as 2D fluctuations and the high field crossing data scale as 3D fluctuations. It would appear that as the magnetic field approaches $H_{c2}$, there is a 2D to 3D cross-over where the low field 2D pancake vortex structure transforms into a 3D vortex structure

Dosimetric comparison study between intensity modulated radiation therapy and three-dimensional conformal proton therapy for pelvic bone marrow sparing in the treatment of cervical cancer.

The objective was to compare intensity-modulated radiation therapy (IMRT) with 3D conformal proton therapy (3DCPT) in the treatment of cervical cancer. In particular, each technique's ability to spare pelvic bone marrow (PBM) was of primary interest in this study. A total of six cervical cancer patients (3 postoperative and 3 intact) were planned and analyzed. All plans had uniform 1.0 cm CTV-PTV margin and satisfied the 95% PTV with 100% isodose (prescription dose = 45 Gy) coverage. Dose-volume histograms (DVH) were analyzed for comparison. The overall PTV and PBM volumes were 1035.9 ± 192.2 cc and 1151.4 ± 198.3 cc, respectively. In terms of PTV dose conformity index (DCI) and dose homogeneity index (DHI), 3DCPT was slightly superior to IMRT with 1.00 ± 0.001, 1.01 ± 0.02, and 1.10 ± 0.02, 1.13 ± 0.01, respectively. In addition, 3DCPT demonstrated superiority in reducing lower doses (i.e., V30 or less) to PBM, small bowel and bladder. Particularly in PBM, average V10 and V20 reductions of 10.8% and 7.4% (p = 0.001 and 0.04), respectively, were observed. However, in the higher dose range, IMRT provided better sparing (> V30). For example, in small bowel and PBM, average reductions in V45 of 4.9% and 10.0% (p = 0.048 and 0.008), respectively, were observed. Due to its physical characteristics such as low entrance dose, spread-out Bragg peak and finite particle range of protons, 3DCPT illustrated superior target coverage uniformity and sparing of the lower doses in PBM and other organs. Further studies are, however, needed to fully exploit the benefits of protons for general use in cervical cancer

Efficient Coil Design by Electromagnetic Topology Optimization for Electromagnetic Sharp Edge Forming of DP980 Steel Sheet

This paper proposes a design method of the tool coil by topology optimization for the electromagnetic sharp edge forming process. Topology optimization is an approach that optimizes material configuration in a given domain to meet the design requirements. The design problem for the tool coil is defined as enhancing efficiency of the forming process and optimization problem is set to be maximization of the Lorentz force induced on the tool coil. A new topology optimization formulation based on the numerical methods for electromagnetism using FEM and BEM is developed for maximization of the Lorentz force. Optimum design of the tool coil is obtained by the topology optimization using the element density approach. The optimized result is compared with other coils which have different configurations to show the effectiveness of the proposed method. The idea of applying topology optimization to the design of the tool coil is successful and this formulation deals effectively for the optimization problems