Neurocalcin-delta: a potential memory-related factor in hippocampus of obese rats induced by high-fat diet.

Introduction: Aberrant protein expression within the hippocampus has recently been implicated in the pathogenesis of obesity- induced memory impairment.Objectives: The objective of the current study was to search for specific memory-related factors in the hippocampus in obese rats.Methods: Sprague-Dawley (SD) rats were fed either a high-fat (HF) diet or normal-fat (NF) diet for 10 weeks to obtain the control (CON), diet-induced obese rats (DIO) and diet-resistant (DR) rats. D-galactose was injected subcutaneously for 10 weeks to establish model (MOD) rats with learning and memory impairment. After the hippocampus of the rats sampling, the proteome analysis was conducted using two-dimensional get electrophoresis (2-DE) combined with peptide mass fingerprinting (PMF).Results: We found 15 differential proteins that expressed in the hippocampus in rats induced by HF diet from the 2-DE map. In addition, Neurocalcin-delta (NCALD) was nearly down-regulated in the DR rats compared with CON rats and MOD rats, which was further confirmed by Western blot, real-time PCR and ELISA results.Conclusion: Our data demonstrates that the differential memory-related proteins were a reflection of the HF diet, but not potential factors in obesity proneness or obesity resistance. Furthermore, NCALD is proved to be a potential hippocampus-memory related factor related to obesity.Keywords: Diet-induced obesity; diet-resistant; high fat diet; neurocalcin-delta; proteom

Flexible PVDF-TrFE Nanocomposites with Ag-decorated BCZT Heterostructures for Piezoelectric Nanogenerator Applications

Flexible piezoelectric nanogenerators are playing an important role in delivering power to next-generation wearable electronic devices due to their high-power density and potential to create self-powered sensors for the Internet of Things. Among the range of available piezoelectric materials, poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE)-based piezoelectric composites exhibit significant potential for flexible piezoelectric nanogenerator applications. However, the high electric fields that are required for poling cannot be readily applied to polymer composites containing piezoelectric fillers due to the high permittivity contrast between the filler and matrix, which reduces the dielectric strength. In this paper, novel Ag-decorated BCZT heterostructures were synthesized via a photoreduction method, which were introduced at a low level (3 wt %) into the matrix of PVDF-TrFE to fabricate piezoelectric composite films. The effect of Ag nanoparticle loading content on the dielectric, ferroelectric, and piezoelectric properties was investigated in detail, where a maximum piezoelectric energy-harvesting figure of merit of 5.68 × 10-12 m2/N was obtained in a 0.04Ag-BCZT NWs/PVDF-TrFE composite film, where 0.04 represents the concentration of the AgNO3 solution. Modeling showed that an optimum performance was achieved by tailoring the fraction and distribution of the conductive silver nanoparticles to achieve a careful balance between generating electric field concentrations to increase the level of polarization, while not degrading the dielectric strength. This work therefore provides a strategy for the design and manufacture of highly polarized piezoelectric composite films for piezoelectric nanogenerator applications.</p

Evaluation of the pore morphologies for piezoelectric energy harvesting application

Piezoelectric energy harvesting has attracted significant attention in recent years due to their high-power density and potential applications for self-powered sensor networks. In comparison to dense piezoelectric ceramics, porous piezoelectric ceramics exhibit superiority due to an enhancement of piezoelectric energy harvesting figure of merit. This paper provides a detailed examination of the effect of pore morphology on the piezoelectric energy harvesting performance of porous barium calcium zirconate titanate 0.5Ba(Zr0.2 Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 (BCZT) ceramics. Three different pore morphologies of spherical, elliptical, and aligned lamellar pores were created via the burnt-out polymer spheres method and freeze casting. The relative permittivity decreased with increasing porosity volume fraction for all porous BCZT ceramics. Both experimental and simulation results demonstrate that porous BCZT ceramics with aligned lamellar pores exhibit a higher remanent polarization. The longitudinal d33 piezoelectric charge coefficient decreased with increasing porosity volume fraction for the porous ceramics with three different pore morphologies; however, the rate of decrease in d33 with porosity is slower for aligned lamellar pores, leading to the highest piezoelectric energy harvesting figure of merit. Moreover, the peak power density of porous BCZT ceramics with aligned lamellar pores is shown to reach up to 38 μW cm-2 when used as an energy harvester, which is significantly higher than that of porous BCZT ceramics with spherical or elliptical pores. This work is beneficial for the design and manufacture of porous ferroelectric materials in devices for piezoelectric energy harvesting applications.</p

3D-Printed Flexible PVDF-TrFE Composites with Aligned BCZT Nanowires and Interdigital Electrodes for Piezoelectric Nanogenerator Applications

Piezoelectric nanogenerators based on piezoelectric nanocomposites have attracted much interest in recent decades owing to their excellent piezoelectric properties and application in self-powered systems and wearable sensors. As a promising piezoelectric ceramic filler in composite-based generators, one-dimensional (1D) piezoelectric nanowires were filled into a polymer matrix to enhance its dielectric and piezoelectric properties. In this paper, flexible PVDF-TrFE composite films containing highly aligned Ba0.85Ca0.15Ti0.9Zr0.1O3 (BCZT) nanowires (NWs) have been manufactured via a direct-ink writing method. The effect of BCZT NW content on the dielectric, ferroelectric, and piezoelectric properties was investigated using multiphysics modeling and detailed experiments. An optimum composite composition was discovered, and the piezoelectric composite film with 15 wt % BCZT NWs possessed the highest energy harvesting figure of merit of 5.3 × 10-12 m2/N. Interdigital electrodes were combined with the composite to fabricate a patterned piezoelectric nanogenerator, where the piezoelectric nanogenerator can produce an open-circuit output voltage of 17 V, and the maximum output power density could reach 5.6 μW/cm2. This work provides opportunities for the optimization and fabrication of piezoelectric materials for energy-harvesting and sensing applications.</p

3D-Printed Flexible PVDF-TrFE Composites with Aligned BCZT Nanowires and Interdigital Electrodes for Piezoelectric Nanogenerator Applications

Piezoelectric nanogenerators based on piezoelectric nanocomposites have attracted much interest in recent decades owing to their excellent piezoelectric properties and application in self-powered systems and wearable sensors. As a promising piezoelectric ceramic filler in composite-based generators, one-dimensional (1D) piezoelectric nanowires were filled into a polymer matrix to enhance its dielectric and piezoelectric properties. In this paper, flexible PVDF-TrFE composite films containing highly aligned Ba0.85Ca0.15Ti0.9Zr0.1O3 (BCZT) nanowires (NWs) have been manufactured via a direct-ink writing method. The effect of BCZT NW content on the dielectric, ferroelectric, and piezoelectric properties was investigated using multiphysics modeling and detailed experiments. An optimum composite composition was discovered, and the piezoelectric composite film with 15 wt % BCZT NWs possessed the highest energy harvesting figure of merit of 5.3 × 10-12 m2/N. Interdigital electrodes were combined with the composite to fabricate a patterned piezoelectric nanogenerator, where the piezoelectric nanogenerator can produce an open-circuit output voltage of 17 V, and the maximum output power density could reach 5.6 μW/cm2. This work provides opportunities for the optimization and fabrication of piezoelectric materials for energy-harvesting and sensing applications.</p

Carbon-Chain Molecules in Molecular Outflows and Lupus I Region--New Producing Region and New Forming Mechanism

Using the new equipment of the Shanghai Tian Ma Radio Telescope, we have searched for carbon-chain molecules (CCMs) towards five outflow sources and six Lupus I starless dust cores, including one region known to be characterized by warm carbon-chain chemistry (WCCC), Lupus I-1 (IRAS 15398-3359), and one TMC-1 like cloud, Lupus I-6 (Lupus-1A). Lines of HC3N J=2-1, HC5N J=6-5, HC7N J=14-13, 15-14, 16-15 and C3S J=3-2 were detected in all the targets except in the outflow source L1660 and the starless dust core Lupus I-3/4. The column densities of nitrogen-bearing species range from 10$^{12}$ to 10$^{14}$ cm$^{-2}$ and those of C$_3$S are about 10$^{12}$ cm$^{-2}$. Two outflow sources, I20582+7724 and L1221, could be identified as new carbon-chain--producing regions. Four of the Lupus I dust cores are newly identified as early quiescent and dark carbon-chain--producing regions similar to Lup I-6, which together with the WCCC source, Lup I-1, indicate that carbon-chain-producing regions are popular in Lupus I which can be regard as a Taurus like molecular cloud complex in our Galaxy. The column densities of C3S are larger than those of HC7N in the three outflow sources I20582, L1221 and L1251A. Shocked carbon-chain chemistry (SCCC) is proposed to explain the abnormal high abundances of C3S compared with those of nitrogen-bearing CCMs. Gas-grain chemical models support the idea that shocks can fuel the environment of those sources with enough $S^+$ thus driving the generation of S-bearing CCMs.Comment: 7 figures, 8 tables, accepted by MNRA

Antiaging Effect of Pine Pollen in Human Diploid Fibroblasts and in a Mouse Model Induced by D-Galactose

The present paper was designed to investigate the effect of pine pollen against aging in human diploid fibroblast 2BS cells and in an accelerated aging model, which was established by subcutaneous injections with D-galactose daily for 8 weeks in C57BL/6J mice. Pine pollen (1 mg/mL and 2 mg/mL) is proved to delay the replicative senescence of 2BS cells as evidenced by enhanced cell proliferation, decreased SA-β-Gal activity, and reversed expression of senescence-associated molecular markers, such as p53, p21Waf1, p16INK4a, PTEN, and p27Kip1 in late PD cells. Besides, pine pollen reversed D-galactose-induced aging effects in neural activity and inflammatory cytokine levels, as indicated by improved memory latency time and reduced error rate in step-down test and decreased concentrations of IL-6 and TNF-α in model mice. Similar to the role of AGEs (advanced glycation endproducts) formation inhibitor aminoguanidine (AG), pine pollen inhibited D-galactose-induced increment of AGEs levels thus reversed the aging phenotypes in model mice. Furthermore, the declined antioxidant activity was obviously reversed upon pine pollen treatment, which may account for its inhibitory effect on nonenzymatic glycation (NEG) in vivo. Our finding presents pine pollen as an attractive agent with potential to retard aging and attenuate age-related diseases in humans

Maize straw application as an interlayer improves organic carbon and total nitrogen concentrations in the soil profile: A four-year experiment in a saline soil

Soil salinization is a critical environmental issue restricting agricultural production. Deep return of straw to the soil as an interlayer (at 40 cm depth) has been a popular practice to alleviate salt stress. However, the legacy effects of straw added as an interlayer at different rates on soil organic carbon (SOC) and total nitrogen (TN) in saline soils still remain inconclusive. Therefore, a four-year (2015–2018) field experiment was conducted with four levels (i.e., 0, 6, 12 and 18 Mg ha–1) of straw returned as an interlayer. Compared with no straw interlayer (CK), straw addition increased SOC concentration by 14–32 and 11–57% in the 20–40 and 40–60 cm soil layers, respectively. The increases in soil TN concentration (8–22 and 6–34% in the 20–40 and 40–60 cm soil layers, respectively) were lower than that for SOC concentration, which led to increased soil C:N ratio in the 20–60 cm soil depth. Increases in SOC and TN concentrations in the 20–60 cm soil layer with straw addition led to a decrease in stratification ratios (0–20 cm:20–60 cm), which promoted uniform distributions of SOC and TN in the soil profile. Increases in SOC and TN concentrations were associated with soil salinity and moisture regulation and improved sunflower yield. Generally, compared with other treatments, the application of 12 Mg ha–1 straw had higher SOC, TN and C:N ratio, and lower soil stratification ratio in the 2015–2017 period. The results highlighted that legacy effects of straw application as an interlayer were maintained for at least four years, and demonstrated that deep soil straw application had a great potential for improving subsoil fertility in salt-affected soils.publishedVersio

A Comprehensive Study of Gamma-Ray Burst Optical Emission: I. Flares and Early Shallow Decay Component

Well-sampled optical lightcurves of 146 gamma-ray bursts (GRBs) are compiled from the literature. By empirical fitting we identify eight possible emission components and summarize the results in a "synthetic" lightcurve. Both optical flare and early shallow-decay components are likely related to long-term central engine activities. We focus on their statistical properties in this paper. Twenty-four optical flares are obtained from 19 GRBs. The isotropic R-band energy is smaller than 1% of $E_{\gamma, \rm iso}$. The relation between isotropic luminosities of the flares and gamma-rays follows $L^{\rm F}_{\rm R, iso}\propto L_{{\gamma}, \rm iso}^{1.11\pm 0.27}$. Later flares tend to be wider and dimmer, i.e., $w^{\rm F}\sim t^{\rm F}_{\rm p}/2$ and $L^{\rm F}_{\rm R, iso}\propto [t^{\rm F}_{\rm p}/(1+z)]^{-1.15\pm0.15}$. The detection probability of the optical flares is much smaller than that of X-ray flares. An optical shallow decay segment is observed in 39 GRBs. The relation between the break time and break luminosity is a power-law, with an index of $-0.78\pm 0.08$, similar to that derived from X-ray flares. The X-ray and optical breaks are usually chromatic, but a tentative correlation is found. We suggest that similar to the prompt optical emission that tracks $\gamma$-rays, the optical flares are also related to the erratic behavior of the central engine. The shallow decay component is likely related to a long-lasting spinning-down central engine or piling up of flare materials onto the blastwave. Mixing of different emission components may be the reason of the diverse chromatic afterglow behaviors.Comment: 43 pages, 13 figures, 3 tables, accepted for publication in Ap