Pressure Effects on the Temperature Sensitivity of Fiber Bragg Gratings

A 3-dimensional physical model was developed to relate the wavelength shifts resulting from temperature changes of fiber Bragg gratings (FBGs) to the thermal expansion coefficients, Young s moduli of optical fibers, and thicknesses of coating polymers. Using this model the Bragg wavelength shifts were calculated and compared with the measured wavelength shifts of FBGs with various coating thickness for a finite temperature range. There was a discrepancy between the calculated and measured wavelength shifts. This was attributed to the refractive index change of the fiber core by the thermally induced radial pressure. To further investigate the pressure effects, a small diametric load was applied to a FBG and Bragg wavelength shifts were measured over a temperature range of 4.2 to 300K

Nonlinearity parameters of polymers

Three types of acoustic nonlinearity parameters for solids are discussed. The results of measurements of these parameters for three polymers--polymethyl methacrylate, Polystyrene, and polysulfone--are presented.;The author has developed a new technique, using piezoelectric transducers directly bonded to the specimens, which allows the measurements of fundamental and second harmonics generated in the solids, and thereby the determination of nonlinearity parameter {dollar}\beta\sb3{dollar}, which is the ratio of a linear combination of second- and third-order elastic coefficients to the second-order elastic coefficient.;The second nonlinearity parameter, B/A can be determined from the temperature and pressure derivatives of the sound velocity. We derive its exact relationship for the case of solids. The results from the two techniques are shown to be consistent.;The pressure derivative of the sound velocity is also related to the Gruneisen parameter, which can be used to describe the anharmonicity of interactions in polymer molecules, especially of interchain vibrations. The interchain specific heat for these polymers is then calculated from the Gruneisen parameters; and the characterization of polymers by using these thermoacoustic parameters is discussed

Fiber Optic Thermal Detection of Composite Delaminations

A recently developed technique is presented for thermographic detection of delaminations in composites by performing temperature measurements with fiber optic Bragg gratings. A single optical fiber with multiple Bragg gratings employed as surface temperature sensors was bonded to the surface of a composite with subsurface defects. The investigated structure was a 10-ply composite specimen with prefabricated delaminations of various sizes and depths. Both during and following the application of a thermal heat flux to the surface, the individual Bragg grating sensors measured the temporal and spatial temperature variations. The data obtained from grating sensors were analyzed with thermal modeling techniques of conventional thermography to reveal particular characteristics of the interested areas. Results were compared and found to be consistent with the calculations using numerical simulation techniques. Also discussed are methods including various heating sources and patterns, and their limitations for performing in-situ structural health monitoring

Fiber Optic Thermographic Detection of Flaws in Composites

Optical fibers with multiple Bragg gratings bonded to surfaces of structures were used for thermographic detection of subsurface defects in structures. The investigated structures included a 10-ply composite specimen with subsurface delaminations of various sizes and depths. Both during and following the application of a thermal heat flux to the surface, the individual Bragg grating sensors measured the temporal and spatial temperature variations. The obtained data were analyzed with thermal modeling to reveal particular characteristics of the interested areas. These results were found to be consistent with the simulation results

High-sensitivity cryogenic temperature sensors using pressurized fiber Bragg gratings

Cryogenic temperature sensing was studied using a pressurized fiber Bragg grating (PFBG). The PFBG was obtained by simply applying a small diametric load to a regular fiber Bragg grating (FBG), which was coated with polyimide of a thickness of 11 micrometers. The Bragg wavelength of the PFBG was measured at temperatures from 295 to 4.2 K. A pressure-induced transition occurred at 200 K during the cooling cycle. As a result the temperature sensitivity of the PFBG was found to be nonlinear but reach 24 pm/K below 200 K, more than three times the regular FBG. For the temperature change from 80 K to 10 K, the PFBG has a total Bragg wavelength shift of about 470 pm, 10 times more than the regular FBG. From room temperature to liquid helium temperature the PFBG gives a total wavelength shift of 3.78 nm, compared to the FBG of 1.51 nm. The effect of the coating thickness on the temperature sensitivity of the gratings is also discussed

Fiber Optic Thermal Health Monitoring of Composites

A recently developed technique is presented for thermographic detection of flaws in composite materials by performing temperature measurements with fiber optic Bragg gratings. Individual optical fibers with multiple Bragg gratings employed as surface temperature sensors were bonded to the surfaces of composites with subsurface defects. The investigated structures included a 10-ply composite specimen with subsurface delaminations of various sizes and depths. Both during and following the application of a thermal heat flux to the surface, the individual Bragg grating sensors measured the temporal and spatial temperature variations. The data obtained from grating sensors were analyzed with thermal modeling techniques of conventional thermography to reveal particular characteristics of the interested areas. Results were compared with the calculations using numerical simulation techniques. Methods and limitations for performing in-situ structural health monitoring are discussed

Fiber Optic Thermal Health Monitoring of Aerospace Structures and Materials

A new technique is presented for thermographic detection of flaws in materials and structures by performing temperature measurements with fiber Bragg gratings. Individual optical fibers with multiple Bragg gratings employed as surface temperature sensors were bonded to the surfaces of structures with subsurface defects or thickness variations. Both during and following the application of a thermal heat flux to the surface, the individual Bragg grating sensors measured the temporal and spatial temperature variations. The investigated structures included a 10-ply composite specimen with subsurface delaminations of various sizes and depths. The data obtained from grating sensors were further analyzed with thermal modeling to reveal particular characteristics of the interested areas. These results were found to be consistent with those from conventional thermography techniques. Limitations of the technique were investigated using both experimental and numerical simulation techniques. Methods for performing in-situ structural health monitoring are discussed

Effects of Coating and Diametric Load on Fiber Bragg Gratings as Cryogenic Temperature Sensors

Cryogenic temperature sensing was demonstrated using pressurized fiber Bragg gratings (PFBGs) with polymer coating of various thicknesses. The PFBG was obtained by applying a small diametric load to a regular fiber Bragg grating (FBG). The Bragg wavelengths of FBGs and PFBG were measured at temperatures from 295 K to 4.2 K. The temperature sensitivities of the FBGs were increased by the polymer coating. A physical model was developed to relate the Bragg wavelength shifts to the thermal expansion coefficients, Young's moduli, and thicknesses of the coating polymers. When a diametric load of no more than 15 N was applied to a FBG, a pressure-induced transition occurred at 200 K during the cooling cycle. The pressure induced transition yielded PFBG temperature sensitivities three times greater than conventional FBGs for temperatures ranging from 80 to 200 K, and ten times greater than conventional fibers for temperatures below 80 K. PFBGs were found to produce an increased Bragg wavelength shift of 2.2 nm compared to conventional FBGs over the temperature range of 4.2 to 300 K. This effect was independent of coating thickness and attributed to the change of the fiber thermo-optic coefficient

Is clopidogrel better than aspirin following breakthrough strokes while on aspirin? A retrospective cohort study.

ObjectiveThere is insufficient evidence on which to base a recommendation for optimal antiplatelet therapy following a stroke while on aspirin. The objective was to compare clopidogrel initiation vs aspirin reinitiation for vascular risk reduction among patients with ischaemic stroke on aspirin at the time of their index stroke.DesignRetrospective.SettingWe conducted a nationwide cohort study by retrieving all hospitalised patients (≥18 years) with a primary diagnosis of ischaemic stroke between 2003 and 2009 from Taiwan National Health Insurance Research Database.ParticipantsAmong 3862 patients receiving aspirin before the index ischaemic stroke and receiving either aspirin or clopidogrel after index stroke during follow-up period, 1623 were excluded due to a medication possession ratio <80%. Also, 355 were excluded due to history of atrial fibrillation, valvular heart disease or coagulopathy. Therefore, 1884 patients were included in our final analysis.InterventionsPatients were categorised into two groups based on whether clopidogrel or aspirin was prescribed during the follow-up period. Follow-up was from time of the index stroke to admission for recurrent stroke or myocardial infarction, death or the end of 2010.Primary and secondary outcome measuresThe primary end point was hospitalisation due to a new-onset major adverse cardiovascular event (MACE: composite of any stroke or myocardial infarction). The leading secondary end point was any recurrent stroke.ResultsCompared to aspirin, clopidogrel was associated with a lower occurrence of future MACE (HR=0.54, 95% CI 0.43 to 0.68, p<0.001, number needed to treat: 8) and recurrent stroke (HR=0.54, 95% CI 0.42 to 0.69, p<0.001, number needed to treat: 9) after adjustment of relevant covariates.ConclusionsAmong patients with an ischaemic stroke while taking aspirin, clopidogrel initiation was associated with fewer recurrent vascular events than aspirin reinitiation

Acute immune thrombocytopenic purpura in an adolescent with 2009 novel H1N1 influenza A virus infection

AbstractAlthough both leukopenia and thrombocytopenia are not uncommon hematological findings among patients with novel 2009 H1N1 influenza virus infection, immune thrombocytopenic purpura has rarely been shown to be associated with this novel influenza A infection. Here, we describe a previously healthy adolescent who presented with fever, influenza-like symptoms and acute onset of generalized petechiae and active oral mucosa bleeding on the third day of his illness. Severe leukopenia and thrombocytopenia were found. There was neither malignancy nor blast cells found by bone marrow aspiration. Real-time reverse transcriptase polymerase chain reaction was positive for novel 2009 H1N1 influenza infection. Novel influenza-associated atypical immune thrombocytopenic purpura was diagnosed. The patient recovered uneventfully after oseltamivir and methylprednisolone therapy