930 research outputs found
Recommended from our members
The evaluation of Federal Fabrics-Fibers electrochemical capacitors
The electrochemical capacitor devices described in this report were deliverables from the US Department of Energy-Idaho Operations Office (DOE-ID) as part of the US Department of Energy`s (DOE) High Power Energy Storage Program. The Idaho National Engineering and Environmental Laboratory (INEEL) has the responsibility for technical management, testing, and evaluation of high-power batteries and electrochemical capacitors under this Program. The DOE is currently developing various electrochemical capacitors as candidate power assist devices for the Partnership for a New Generation of Vehicles (PNGV) fast response engine requirement. This contract with Federal Fabrics-Fibers was intended to evaluate the use of their novel Z-axis carbon fiber materials as candidate electrodes for electrochemical capacitors. Deliverables were sent to the INEEL`s Energy Storage Technologies (EST) Laboratory for independent testing and evaluation. This report describes performance testing on four selected devices delivered over a 2-year period. Due to the highly experimental nature of the packages, life cycle testing was not conducted
Effects of rumen-undegradable protein and feed intake on nitrogen balance and milk protein production in dairy cows
An experiment was designed to determine the response of milk protein production and N utilization in dairy cows to supplementation of a predominantly rumen-undegradable protein (RUP) mixture with a fixed amino acid (AA) pattern and the response to the amount of feed intake. The experiment was designed as a 6 x 6 Latin square with a 3 x 2 factorial arrangement of treatments. The factors were three concentrations of RUP supplement (4.5, 14.9, and 29.1% of dry matter intake) and two levels of feed intake restriction (10 and 20%) of the basal diet. The supplement was designed to approximate a postruminal AA pattern that was similar to bovine caseins for Met, Lys, Phe, His, and Thr. Measurements were made during the last 5 d of each 21-d period. Milk protein production responded linearly as the concentration of RUP supplement in the treatment diet increased within the given range. The difference in feed intake restriction did not affect milk protein production. Efficiency of N utilization for milk production exceeded 30% for cows fed the lowest RUP supplement. Results indicated that there is an opportunity to increase milk protein production by using RUP formulations that are balanced for AA while minimizing waste N excretion
Effects of Rumen-undegradable Protein and Feed Intake on Purine Derivative and Urea Nitrogen: Comparison with Predictions from the Cornell Net Carbohydrate and Protein System
Six multiparous Holstein cows were used in a 6 x 6 Latin square to investigate the ability of the Cornell Net Carbohydrate and Protein System to predict accurately rumen microbial yield, plasma urea N, and milk urea N. Estimations for microbial protein yield were compared with the measured excretion of purine derivative N in urine. A 3 x 2 factorial arrangement of treatments was adopted. Three concentrations of a rumen-undegradable protein (RUP) supplement (4.5, 14.9, and 29.1% of dry matter intake) and two levels of feed restriction (90 and 80% of ad libitum intake) were the corresponding factors. No effect of concentration of RUP supplement or feed restriction was detected on the excretion of purine derivative N in urine (mean, 18.5 g/d). Conversely, the Cornell system predicted a linear decrease in metabolizable protein from bacteria as the concentration of the RUP supplement increased. The Cornell system also predicted a significant reduction in metabolizable protein of microbial origin as feed restriction was increased. Measured values and values derived from the Cornell system for plasma and milk urea N increased linearly as the concentration of the RUP supplement increased. The Cornell system overpredicted milk urea N for cows consuming the highest RUP concentration. Predictions by the Cornell Net Carbohydrate and Protein System were of limited value because the empirical nature of the model is insufficiently rigorous to yield accurate predictions under the conditions described herein
From critical behavior to catastrophic runaways: comparing sheared granular materials with bulk metallic glasses
In vivo impact of a 4 bp deletion mutation in the DLX3 gene on bone development
AbstractDistal-less 3 (DLX3) gene mutations are etiologic for Tricho-Dento-Osseous syndrome. To investigate the in vivo impact of mutant DLX3 on bone development, we established transgenic (TG) mice expressing the c.571_574delGGGG DLX-3 gene mutation (MT-DLX3) driven by a mouse 2.3 Col1A1 promoter. Microcomputed tomographic analyses demonstrated markedly increased trabecular bone volume and bone mineral density in femora from TG mice. In ex vivo experiments, TG mice showed enhanced differentiation of bone marrow stromal cells to osteoblasts and increased expression levels of bone formation markers. However, TG mice did not show enhanced dynamic bone formation rates in in vivo fluorochrome double labeling experiments. Osteoclastic differentiation capacities of bone marrow monocytes were reduced in TG mice in the presence of osteoclastogenic factors and the numbers of TRAP(+) osteoclasts on distal metaphyseal trabecular bone surfaces were significantly decreased. TRACP 5b and CTX serum levels were significantly decreased in TG mice, while IFN-γ levels were significantly increased. These data demonstrate that increased levels of IFN-γ decrease osteoclast bone resorption activities, contributing to the enhanced trabecular bone volume and mineral density in these TG mice. These data suggest a novel role for this DLX-3 mutation in osteoclast differentiation and bone resorption
Bonding mechanism from the impact of thermally sprayed solid particles
Power particles are mainly in solid state prior to impact on substrates from high velocity oxy-fuel (HVOF) thermal spraying. The bonding between particles and substrates is critical to ensure the quality of coating. Finite element analysis (FEA) models are developed to simulate the impingement process of solid particle impact on substrates. This numerical study examines the bonding mechanism between particles and substrates and establishes the critical particle impact parameters for bonding. Considering the morphology of particles, the shear-instability–based method is applied to all the particles, and the energy-based method is employed only for spherical particles. The particles are given the properties of widely used WC-Co powder for HVOF thermally sprayed coatings. The numerical results confirm that in the HVOF process, the kinetic energy of the particle prior to impact plays the most dominant role in particle stress localization and melting of the interfacial contact region. The critical impact parameters, such as particle velocity and temperature, are shown to be affected by the shape of particles, while higher impact velocity is required for highly nonspherical powder
Search for Primordial Black Holes with SGARFACE
The Short GAmma Ray Front Air Cherenkov Experiment (SGARFACE) uses the
Whipple 10 m telescope to search for bursts of rays. SGARFACE is
sensitive to bursts with duration from a few ns to 20 s and with
-ray energy above 100 MeV. SGARFACE began operating in March 2003 and
has collected 2.2 million events during an exposure time of 2267 hours. A
search for bursts of rays from explosions of primordial black holes
(PBH) was carried out. A Hagedorn-type PBH explosion is predicted to be visible
within 60 pc of Earth. Background events were caused by cosmic rays and by
atmospheric phenomena and their rejection was accomplished to a large extent
using the time-resolved images. No unambiguous detection of bursts of
rays could be made as the remaining background events mimic the expected shape
and time development of bursts. Upper limits on the PBH explosion rate were
derived from the SGARFACE data and are compared to previous and future
experiments. We note that a future array of large wide-field air-Cherenkov
telescopes equipped with a SGARFACE-like trigger would be able to operate
background-free with a 20 to 30 times higher sensitivity for PBH explosions.Comment: 18 pages, 30 figures, accepted by Astroparticle Physics, corrected
author list and Section 2.
Phenotypic Variation in FAM83H- associated Amelogenesis Imperfecta
FAM83H gene mutations are associated with autosomal-dominant hypocalcified amelogenesis imperfecta (ADHCAI), which is typically characterized by enamel having normal thickness and a markedly decreased mineral content. This study tested the hypothesis that there are phenotype and genotype associations in families with FAM83H-associated ADHCAI. Seven families segregating ADHCAI (147 individuals) were evaluated. Phenotyping included clinical, radiographic, histological, and biochemical studies, and genotyping was by mutational analysis. Multiple novel FAM83H mutations were identified, including two 2-bp-deletion mutations, the first non-nonsense mutations identified. Craniofacial deviation from normal was more prevalent in the affected individuals. Affected individuals having truncating FAMH3H mutations of 677 or fewer amino acids presented a generalized ADHCAI phenotype, while those having mutations capable of producing a protein of at least 694 amino acids had a unique and previously unreported phenotype affecting primarily the cervical enamel. This investigation shows that unique phenotypes are associated with specific FAM83H mutations
Soft Condensed Matter Physics
Soft condensed matter physics is the study of materials, such as fluids,
liquid crystals, polymers, colloids, and emulsions, that are ``soft" to the
touch. This article will review some properties, such as the dominance of
entropy, that are unique to soft materials and some properties such as the
interplay between broken-symmetry, dynamic mode structure, and topological
defects that are common to all condensed matter systems but which are most
easily studied in soft systems.Comment: 11 Pages, RevTeX, 7 postscript figures. To appear in Solid State
Communication
Terrace Standard, July, 09, 1997
Slowly strained solids deform via intermittent slips that exhibit a material-independent critical size distribution. Here, by comparing two disparate systems - granular materials and bulk metallic glasses - we show evidence that not only the statistics of slips but also their dynamics are remarkably similar, i.e. independent of the microscopic details of the material. By resolving and comparing the full time evolution of avalanches in bulk metallic glasses and granular materials, we uncover a regime of universal deformation dynamics. We experimentally verify the predicted universal scaling functions for the dynamics of individual avalanches in both systems, and show that both the slip statistics and dynamics are independent of the scale and details of the material structure and interactions, thus settling a long-standing debate as to whether or not the claim of universality includes only the slip statistics or also the slip dynamics. The results imply that the frictional weakening in granular materials and the interplay of damping, weakening and inertial effects in bulk metallic glasses have strikingly similar effects on the slip dynamics. These results are important for transferring experimental results across scales and material structures in a single theory of deformation dynamics
- …