Thread cutting with 3-axis N/C milling machine

TAPDIE, a generalized macro written for the APT numerical control system, cuts threads in stock too big for conventional machines or for which conventional methods are unsuitable. TAPDIE computes the machine tool path necessary and the information is passed on to a post-processor which produces a control tape

Test results of the Chrysler upgraded automotive gas turbine engine: Initial design

The upgraded engine as built to the original design was deficient in power and had excessive specific fuel consumption. A high instrumented version of the engine was tested to identify the sources of the engine problems. Analysis of the data shows the major problems to be low compressor and power turbine efficiency and excessive interstage duct losses. In addition, high HC and CO emission were measured at idle, and high NOx emissions at high energy speeds

Phase and amplitude scintillations of microwave signals over an elevated atmospheric path

Phase and amplitude scintillations of microwave signals over elevated atmospheric path for obtaining atmospheric density profile

Second Order Pyramidal Slip in Zinc

Measurements of strain, dislocation density, and dislocation velocity have been made in 99.999% Zn stressed in compression along the hexagonal axis, [0001]. Slip bands on the second order pyramid,〈1213〉{1212}, system were observed. The average dislocation density increases linearly with strain. The velocity of edge dislocations in slip bands obeys the relation v = (Γ/ Γ_0)^n with v in in. / sec, n = 8.7, Γ_0 = 870 lb/in.^2, and Γ the resolved shear stress in lb/in^2. These observations together with measurements of the strain rate sensitivity of the flow stress show that the stress dependence of the density of moving dislocations is more important than the stress dependence of the dislocation velocity as they affect the strain rate

Lunar Outgassing, Transient Phenomena and The Return to The Moon, I: Existing Data

Herein the transient lunar phenomena (TLP) report database is subjected to a discriminating statistical filter robust against sites of spurious reports, and produces a restricted sample that may be largely reliable. This subset is highly correlated geographically with the catalog of outgassing events seen by the Apollo 15, 16 and Lunar Prospector alpha-particle spectrometers for episodic Rn-222 gas release. Both this robust TLP sample and even the larger, unfiltered sample are highly correlated with the boundary between mare and highlands, as are both deep and shallow moonquakes, as well as Po-210, a long-lived product of Rn-222 decay and a further tracer of outgassing. This offers another significant correlation relating TLPs and outgassing, and may tie some of this activity to sagging mare basalt plains (perhaps mascons). Additionally, low-level but likely significant TLP activity is connected to recent, major impact craters (while moonquakes are not), which may indicate the effects of cracks caused by the impacts, or perhaps avalanches, allowing release of gas. The majority of TLP (and Rn-222) activity, however, is confined to one site that produced much of the basalt in the Procellarum Terrane, and it seems plausible that this TLP activity may be tied to residual outgassing from the formerly largest volcanic ffusion sites from the deep lunar interior. With the coming in the next few years of robotic spacecraft followed by human exploration, the study of TLPs and outgassing is both promising and imperiled. We will have an unprecedented pportunity to study lunar outgassing, but will also deal with a greater burden of anthropogenic lunar gas than ever produced. There is a pressing need to study lunar atmosphere and its sources while still pristine. [Abstract abridged.]Comment: 35 pages, 3 figures, submitted to Icarus. Other papers in series found at http://www.astro.columbia.edu/~arlin/TLP

Using palaeoenvironmental DNA to reconstruct past environments: progress and prospects

Palaeoenvironmental DNA (PalEnDNA) is defined as ancient DNA (aDNA) originating from disseminated genetic material within palaeoenvironmental samples. Sources of PalEnDNA include marine and lake sediments, peat, loess, till, ice, permafrost, palaeosols, coprolites, preserved gut contents, dental calculus, tephras, and soils as well as deposits in caves/rockshelters and at archaeological sites. PalEnDNA analysis provides a relatively new tool for Quaternary and archaeological sciences and its applications have included palaeoenvironmental and palaeodietary reconstructions, testing hypotheses regarding megafaunal extinctions, human–environment interactions, taxonomic studies and studies of DNA damage. Because PalEnDNA samples comprise markedly different materials, and represent wide-ranging depositional and taphonomic contexts, various issues must be addressed to achieve robust, reproducible findings. Such issues include climatic and temporal limitations, the biological origin and state (free versus bound) of PalEnDNA, stratigraphic reliability, sterile sampling, ability to distinguish modern from aDNA signals, DNA damage and PCR amplification, DNA extraction methods, and taxonomic resolution. In this review, we provide a non-specialist introduction to the use of PalEnDNA for Quaternary and archaeological researchers, assess attributes and limitations of this palaeoenvironmental tool, and discuss future prospects of using PalEnDNA to reconstruct past environments

Visual Similarity Perception of Directed Acyclic Graphs: A Study on Influencing Factors

While visual comparison of directed acyclic graphs (DAGs) is commonly encountered in various disciplines (e.g., finance, biology), knowledge about humans' perception of graph similarity is currently quite limited. By graph similarity perception we mean how humans perceive commonalities and differences in graphs and herewith come to a similarity judgment. As a step toward filling this gap the study reported in this paper strives to identify factors which influence the similarity perception of DAGs. In particular, we conducted a card-sorting study employing a qualitative and quantitative analysis approach to identify 1) groups of DAGs that are perceived as similar by the participants and 2) the reasons behind their choice of groups. Our results suggest that similarity is mainly influenced by the number of levels, the number of nodes on a level, and the overall shape of the graph.Comment: Graph Drawing 2017 - arXiv Version; Keywords: Graphs, Perception, Similarity, Comparison, Visualizatio

A questionnaire to identify patellofemoral pain in the community: an exploration of measurement properties

Background Community-based studies of patellofemoral pain (PFP) need a questionnaire tool that discriminates between those with and those without the condition. To overcome these issues, we have designed a self-report questionnaire which aims to identify people with PFP in the community. Methods Study designs: comparative study and cross-sectional study. Study population: comparative study: PFP patients, soft-tissue injury patients and adults without knee problems. Cross-sectional study: adults attending a science festival. Intervention: comparative study participants completed the questionnaire at baseline and two weeks later. Cross-sectional study participants completed the questionnaire once. The optimal scoring system and threshold was explored using receiver operating characteristic curves, test-retest reliability using Cohen’s kappa and measurement error using Bland-Altman plots and standard error of measurement. Known-group validity was explored by comparing PFP prevalence between genders and age groups. Results Eighty-four participants were recruited to the comparative study. The receiver operating characteristic curves suggested limiting the questionnaire to the clinical features and knee pain map sections (AUC 0.97 95 % CI 0.94 to 1.00). This combination had high sensitivity and specificity (over 90 %). Measurement error was less than the mean difference between the groups. Test–retest reliability estimates suggest good agreement (N = 51, k = 0.74, 95 % CI 0.52–0.91). The cross-sectional study (N = 110) showed expected differences between genders and age groups but these were not statistically significant. Conclusion A shortened version of the questionnaire, based on clinical features and a knee pain map, has good measurement properties. Further work is needed to validate the questionnaire in community samples

Bounds on Integrals of the Wigner Function

The integral of the Wigner function over a subregion of the phase-space of a quantum system may be less than zero or greater than one. It is shown that for systems with one degree of freedom, the problem of determining the best possible upper and lower bounds on such an integral, over all possible states, reduces to the problem of finding the greatest and least eigenvalues of an hermitian operator corresponding to the subregion. The problem is solved exactly in the case of an arbitrary elliptical region. These bounds provide checks on experimentally measured quasiprobability distributions.Comment: 10 pages, 1 PostScript figure, Latex file; revised following referees' comments; to appear in Physical Review Letter

PhyloMarker—A Tool for Mining Phylogenetic Markers Through Genome Comparison: Application of the Mouse Lemur (Genus Microcebus) Phylogeny

Molecular phylogeny is a fundamental tool to understanding the evolution of all life forms. One common issue faced by molecular phylogeny is the lack of sufficient molecular markers. Here, we present PhyloMarker, a phylogenomic tool designed to find nuclear gene markers for the inference of phylogeny through multiple genome comparison. Around 800 candidate markers were identified by PhyloMarker through comparison of partial genomes of Microcebus and Otolemur. In experimental tests of 20 randomly selected markers, nine markers were successfully amplified by PCR and directly sequenced in all 17 nominal Microcebus species. Phylogenetic analyses of the sequence data obtained for 17 taxa and nine markers confirmed the distinct lineage inferred from previous mtDNA data. PhyloMarker has also been used by other projects including the herons (Ardeidae, Aves) phylogeny and the Wood mice (Muridae, Mammalia) phylogeny. All source code and sample data are made available at http://bioinfo-srv1.awh.unomaha.edu/phylomarker/