25 research outputs found
Recommended from our members
Basal Dynamics and Internal Structure of Ice Sheets
The internal structure of ice sheets reflects the history of flow and deformation experienced by the ice mass. Flow and deformation are controlled by processes occurring within the ice mass and at its boundaries, including surface accumulation or ablation, ice rheology, basal topography, basal sliding, and basal melting or freezing. The internal structure and basal environment of ice sheets is studied with ice-penetrating radar. Recently, radar observations in Greenland and Antarctica have imaged large englacial structures rising from near the bed that deform the overlying stratigraphy into anticlines, synclines, and overturned folds. The mechanisms that may produce these structures include basal freeze-on, travelling slippery patches at the ice base, and rheological contrasts within the ice column.
In this thesis, I explore the setting and mechanisms that produce large basal stratigraphic structures inside ice sheets. First, I use radar data to map subglacial hydrologic networks that deliver meltwater uphill towards freeze-on structures in East Antarctica. Next, I use a thermomechanical flowline model to demonstrate that trains of alternating slippery and sticky patches can form underneath ice sheets and travel downstream over time. The disturbances to the ice flow field produced by these travelling patches produce stratigraphic folds resembling the observations. I then examine the overturned folds produced by a single travelling sticky patch using a kinematic flowline model. This model is used to interpret
stratigraphic measurements in terms of the dynamic properties of basal slip. Finally, I use a simple local one-dimensional model to estimate the thickness of basal freeze-on that can be produced based on the supply of available meltwater, the thermal boundary conditions, ice sheet geometry, and the ice flow regime
Overturned folds in ice sheets: Insights from a kinematic model of traveling sticky patches and comparisons with observations
Overturned folds are observed in regions of the Greenland ice sheet where driving stress is highly variable. Three mechanisms have been proposed to explain these folds: freezing subglacial water, traveling basal slippery patches, and englacial rheological contrasts. Here we explore how traveling basal sticky patches can produce overturned folds. Transitions from low to high stress cause a tradeoff in ice flow between basal slip and internal deformation that deflects ice stratigraphy vertically. If these transitions move, the slip-deformation tradeoff can produce large folds. Those folds record the integrated effects of time-varying basal slip. To understand how dynamic changes in basal slip influence ice sheet stratigraphy, we develop a kinematic model of ice flow in a moving reference frame that follows a single traveling sticky patch. The ice flow field forms a vortex when viewed in the moving reference frame, and this vortex traps ice above the traveling patch and produces overturned folds. Sticky patches that travel downstream faster produce larger overturned folds. We use the model as an interpretive tool to infer properties of basal slip from three example folds. Our model suggests that the sticky patches underneath these folds propagated downstream at rates between one half and the full ice velocity. The regional flow regime for the smaller two folds requires substantial internal deformation whereas the regime for the largest fold requires substantially more basal slip. The distribution and character of stratigraphic folds reflect the evolution and propagation of individual sticky patches and their effects on ice sheet flow
Recommended from our members
Identification and control of subglacial water networks under Dome A, Antarctica
Subglacial water in continental Antarctica forms by melting of basal ice due to geothermal or frictional heating. Subglacial networks transport the water from melting areas and can facilitate sliding by the ice sheet over its bed. Subglacial water flow is driven mainly by gradients in overburden pressure and bed elevation. We identify small (median 850 m) water bodies within the Gamburtsev Subglacial Mountains in East Antarctica organized into long (20–103 km) coherent drainage networks using a dense (5 km) grid of airborne radar data. The individual water bodies are smaller on average than the water bodies contained in existing inventories of Antarctic subglacial water and most are smaller than the mean ice thickness of 2.5 km, reflecting a focusing of basal water by rugged topography. The water system in the Gamburtsev Subglacial Mountains reoccupies a system of alpine overdeepenings created by valley glaciers in the early growth phase of the East Antarctic Ice Sheet. The networks follow valley floors either uphill or downhill depending on the gradient of the ice sheet surface. In cases where the networks follow valley floors uphill they terminate in or near plumes of freeze-on ice, indicating source to sink transport within the basal hydrologic system. Because the ice surface determines drainage direction within the bed-constrained network, the system is bed-routed but surface-directed. Along-flow variability in the structure of the freeze-on plumes suggests variability in the networks on long (10s of ka) timescales, possibly indicating changes in the basal thermal state
Influence of Persistent Wind Scour on the Surface Mass Balance of Antarctica
Accurate quantification of surface snow accumulation over Antarctica is a key constraint for estimates of the Antarctic mass balance, as well as climatic interpretations of ice-core records. Over Antarctica, near-surface winds accelerate down relatively steep surface slopes, eroding and sublimating the snow. This wind scour results in numerous localized regions (< or = 200 sq km) with reduced surface accumulation. Estimates of Antarctic surface mass balance rely on sparse point measurements or coarse atmospheric models that do not capture these local processes, and overestimate the net mass input in wind-scour zones. Here we combine airborne radar observations of unconformable stratigraphic layers with lidar-derived surface roughness measurements to identify extensive wind-scour zones over Dome A, in the interior of East Antarctica. The scour zones are persistent because they are controlled by bedrock topography. On the basis of our Dome A observations, we develop an empirical model to predict wind-scour zones across the Antarctic continent and find that these zones are predominantly located in East Antarctica. We estimate that approx. 2.7-6.6% of the surface area of Antarctica has persistent negative net accumulation due to wind scour, which suggests that, across the continent, the snow mass input is overestimated by 11-36.5 Gt /yr in present surface-mass-balance calculations
Traveling slippery patches produce thickness-scale folds in ice sheets
Large, complex stratigraphic folds that rise as high as 60% of the local ice thickness have been observed in ice sheets on Antarctica and Greenland. Here we show that ice deformation caused by heterogeneous and time-variable basal sliding can produce the observed structures. We do this using a thermomechanical ice sheet model in which sliding occurs when the base approaches the melting point and slippery patches develop. These slippery patches emerge and travel downstream because of a feedback between ice deformation, vertical flow, and temperature. Our model produces the largest overturned structures, comparable to observations, when the patches move at about the ice column velocity. We conclude that the history of basal slip conditions is recorded in the ice sheet strata. These basal conditions appear to be dynamic and heterogeneous even in the slow-flowing interior regions of large ice sheets
On the evolution of an ice shelf melt channel at the base of Filchner Ice Shelf, from observations and viscoelastic modeling
Ice shelves play a key role in the stability of the Antarctic Ice Sheet due to their buttressing effect. A loss of buttressing as a result of increased basal melting or ice shelf disintegration will lead to increased ice discharge. Some ice shelves exhibit channels at the base that are not yet fully understood. In this study, we present in situ melt rates of a channel which is up to 330 m high and located in the southern Filchner Ice Shelf. Maximum observed melt rates are 2 m yr−1. Melt rates inside the channel decrease in the direction of ice flow and turn to freezing ∼55 km downstream of the grounding line. While closer to the grounding line melt rates are higher within the channel than outside, this relationship reverses further downstream. Comparing the modeled evolution of this channel under present-day climate conditions over 250 years with its present geometry reveals a mismatch. Melt rates twice as large as the present-day values are required to fit the observed geometry. In contrast, forcing the model with present-day melt rates results in a closure of the channel, which contradicts observations. The ice shelf experiences strong tidal variability in vertical strain rates at the measured site, and discrete pulses of increased melting occurred throughout the measurement period. The type of melt channel in this study diminishes in height with distance from the grounding line and is hence not a destabilizing factor for ice shelves.</p
Freezing of ridges and water networks preserves the Gamburtsev Subglacial Mountains for millions of years
Once an ice sheet grows beyond a critical thickness, the basal thermal regime favors melting and development of subglacial water networks. Subglacial water is necessary for bedrock erosion, but the exact mechanisms that lead to preservation of subglacial topography are unclear. Here we resolve the freezing mechanisms that lead to long-term, high-altitude preservation across the Gamburtsev Subglacial Mountains in East Antarctica. Analyses of a comprehensive geophysical data set reveal a large-scale water network along valley floors. The ice sheet often drives subglacial water up steep topography where it freezes along high ridges beneath thinner ice. Statistical tests of hypsometry show the Gamburtsevs resemble younger midlatitude mountains, indicating exceptional preservation. We conclude that the Gamburtsevs have been shielded from erosion since the latest Eocene (∼34 Ma). These freezing mechanisms likely account for the spatial and temporal patterns of erosion and preservation seen in other glaciated mountain ranges
Regularization and L-curves in ice sheet inverse models: a case study in the Filchner–Ronne catchment
Over the past 3 decades, inversions for ice sheet basal drag have become commonplace in glaciological modeling. Such inversions require regularization to prevent over-fitting and ensure that the structure they recover is a robust inference from the observations, confidence which is required if they are to be used to draw conclusions about processes and properties of the ice base. While L-curve analysis can be used to select the optimal regularization level, the treatment of L-curve analysis in glaciological inverse modeling has been highly variable. Building on the history of glaciological inverse modeling, we demonstrate general best practices for regularizing glaciological inverse problems, using a domain in the Filchner-Ronne catchment of Antarctica as our test bed. We show a step-by-step approach to cost function normalization and L-curve analysis. We explore the spatial and spectral characteristics of the solution as a function of regularization, and we test the sensitivity of L-curve analysis and regularization to model resolution, effective pressure, sliding nonlinearity, and the flow equation. We find that the optimal regularization level converges towards a finite non-zero limit in the continuous problem, associated with a best knowable basal drag field. Nonlinear sliding laws outperform linear sliding in our analysis, with both a lower total variance and a more sharply cornered L-curve. By contrast, geometry-based approximations for effective pressure degrade inversion performance when added to a sliding law, but an actual hydrology model may marginally improve performance in some cases. Our results with 3D inversions suggest that the additional model complexity may not be justified by the 2D nature of the surface velocity data. We conclude with recommendations for best practices in future glaciological inversions
Greenland ice sheet surface runoff projections to 2200 using degree-day methods
Surface runoff from the Greenland ice sheet (GrIS) has dominated recent ice mass loss and is having significant impacts on sea-level rise under global warming. Here, we used two modified degree-day (DD) methods to estimate the runoff of the GrIS during 1950–2200 under the extensions of historical, RCP 4.5, and RCP 8.5 scenarios. Near-surface air temperature and snowfall were obtained from five Earth System Models. We applied new degree-day factors to best match the results of the surface energy and mass balance model, SEMIC, over the whole GrIS in a 21st century simulation. The relative misfits between tuned DD methods and SEMIC during 2050–2089 were 3% (RCP4.5) and 12% (RCP8.5), much smaller than the 30% difference between untuned DD methods and SEMIC. Equilibrium line altitude evolution, runoff-elevation feedback, and ice mask evolution were considered in the future simulations to 2200. The ensemble mean cumulative runoff increasing over the GrIS was equivalent to sea-level rises of 6 ± 2 cm (RCP4.5) and 9 ± 3 cm (RCP8.5) by 2100 relative to the period 1950–2005, and 13 ± 4 cm (RCP4.5) and 40 ± 5 cm (RCP8.5) by 2200. Runoff-elevation feedback produced runoff increases of 5 ± 2% (RCP4.5) and 6 ± 2% (RCP8.5) by 2100, and 12 ± 4% (RCP4.5) and 15 ± 5% (RCP8.5) by 2200. Two sensitivity experiments showed that increases of 150% or 200%, relative to the annual mean amount of snowfall in 2080–2100, in the post-2100 period would lead to 10% or 20% more runoff under RCP4.5 and 5% or 10% under RCP8.5 because faster ice margin retreat and ice sheet loss under RCP8.5 dominate snowfall increases and ice elevation feedbacks