Monte Carlo Radiative Transfer

I outline methods for calculating the solution of Monte Carlo Radiative Transfer (MCRT) in scattering, absorption and emission processes of dust and gas, including polarization. I provide a bibliography of relevant papers on methods with astrophysical applications.Comment: To appear in the Chandra Centennial issue of the Bulletin of the Astronomical Society of India, volume 39 (2011), eds D.J. Saikia and Virginia Trimble; 27 pages, 1 figur

A Low-Cost Microprocessor-Controlled Stance-Control Knee Orthosis for Pediatric Mobility Impairments

Knee-ankle-foot orthoses (KAFOs) are commonly prescribed for individuals with knee instability or quadriceps weakness resulting from a variety of conditions such as spinal cord injury, stroke, spina bifida, and cerebral palsy. A locking KAFO fixes the leg fully straight and is the most prescribed orthotic intervention for these conditions. However, the functional benefits of lower extremity orthoses are maximally realized in stance-controlled knee-ankle-foot orthoses (SC-KAFOs) which allow free knee motion during swing but lock during stance. Existing SC-KAFO options are generally unreliable or expensive, and thus an unmet need exists for a reliable, versatile orthosis which can be manufactured at relatively low cost. The SC-KO team is working to meet this need by developing an intelligent stance-controlled knee orthotic with an any-angle locking mechanism controlled by a microprocessor based on information received from onboard inertial gait-phase sensing. The resulting device will allow for reliable knee locking for support during the stance phase, easy unlocking even under load for the free swing phase, and predictable, safe behavior on stairs and uneven terrain. The system is being developed as a knee-only orthosis but can be adapted for a full knee-ankle-foot orthosis, with ankle support being prescribed as needed. The first system developed will be configured for pediatric use to address mobility impairments arising from cerebral palsy and spina bifida with CURE Ethiopia serving as the clinical partner for the development and testing. Funding for this work provided by The Collaboratory for Strategic Partnerships and Applied Research.https://mosaic.messiah.edu/engr2022/1017/thumbnail.jp

Homeopathic treatment of patients with chronic sinusitis: A prospective observational study with 8 years follow-up

<p>Abstract</p> <p>Background</p> <p>An evaluation of homeopathic treatment and the outcomes in patients suffering from sinusitis for ≥12 weeks in a usual care situation.</p> <p>Methods</p> <p>Subgroup analysis including all patients with chronic sinusitis (ICD-9: 473.9; ≥12 weeks duration) of a large prospective multicentre observational study population. Consecutive patients presenting for homeopathic treatment were followed-up for 2 years, and complaint severity, health-related quality of life (QoL), and medication use were regularly recorded. We also present here patient-reported health status 8 years post initial treatment.</p> <p>Results</p> <p>The study included 134 adults (mean age 39.8 ± 10.4 years, 76.1% women), treated by 62 physicians. Patients had suffered from chronic sinusitis for 10.7 ± 9.8 years. Almost all patients (97.0%) had previously been treated with conventional medicine. For sinusitis, effect size (effect divided by standard deviation at baseline) of complaint severity was 1.58 (95% CI 1.77; 1.40), 2.15 (2.38; 1.92), and 2.43 (2.68; 2.18) at 3, 12, and 24 months respectively. QoL improved accordingly, with SF-36 changes in physical component score 0.27 (0.15; 0.39), 0.35 (0.19; 0.52), 0.44 (0.23; 0.65) and mental component score 0.66 (0.49; 0.84), 0.71 (0.50; 0.92), 0.65 (0.39; 0.92), 0.74 (0.49; 1.00) at these points. The effects were still present after 8 years with SF-36 physical component score 0.38 (0.10; 0.65) and mental component score 0.74 (0.49; 1.00).</p> <p>Conclusion</p> <p>This observational study showed relevant improvements that persisted for 8 years in patients seeking homeopathic treatment because of sinusitis. The extent to which the observed effects are due to the life-style regulation and placebo or context effects associated with the treatment needs clarification in future explanatory studies.</p

Putting the PASS in Class: Peer Mentors’ Identities in Science Workshops on Campus and Online

In this paper, we analyse the introduction of peer mentors into timetabled classes to understand how in-class mentoring supports students’ learning. The peer mentors in this study are high-achieving students who previously completed the same course and who were hired and trained to facilitate Peer Assisted Study Sessions (PASS). PASS gives students the opportunity to deepen their understanding through revision and active learning and are typically held outside of class time. In contrast, our trial embedded peer mentors into classes for a large (~250 students) first-year workshop-based course. We employed a participatory action research methodology to facilitate the peer mentors’ co-creation of the research process. Data sources include peer mentors’ journal entries, student cohort data, and a focus group with teaching staff. We found that during face-to-face workshops, peer mentors role-modelled ideal student behaviour (e.g., asking questions) rather than acting as additional teachers, and this helped students to better understand how to interact effectively in class. The identity of embedded peer mentors is neither that of teachers nor of students, and it instead spans aspects of both as described using a three-part schema comprising (i) identity, (ii) associated roles, and (iii) associated practices. As we moved classes online mid-semester in response to the COVID-19 pandemic, mentors’ identities remained stable, but mentors adjusted their associated roles and practices, including through the technical aspects of their engagement with students. This study highlights the benefits of embedding mentors in classrooms on campus and online

Particle creation, renormalizability conditions and the mass-energy spectrum in gravity theories of quadratic Lagrangians

Massive scalar particle production, due to the anisotropic evolution of a five-dimensional spacetime, is considered in the context of a quadratic Lagrangian theory of gravity. Those particles, corresponding to field modes with non-vanishing momentum component along the fifth dimension, are created mostly in the neighbourhood of a singular epoch where only their high-frequency behaviour is of considerable importance. At the 1-loop approximation level, general renormalizability conditions on the physical quantities relevant to particle production are derived and discussed. Exact solutions of the resulting Klein-Gordon field equation are obtained and the mass-energy spectrum attributed to the scalar field due to the cosmological evolution is being investigated further. Finally, analytic expressions regarding the number and the energy density of the created particles at late times, are also derived and discussed.Comment: LaTeX file, 23 page

Multi-Messenger Gravitational Wave Searches with Pulsar Timing Arrays: Application to 3C66B Using the NANOGrav 11-year Data Set

When galaxies merge, the supermassive black holes in their centers may form binaries and, during the process of merger, emit low-frequency gravitational radiation in the process. In this paper we consider the galaxy 3C66B, which was used as the target of the first multi-messenger search for gravitational waves. Due to the observed periodicities present in the photometric and astrometric data of the source of the source, it has been theorized to contain a supermassive black hole binary. Its apparent 1.05-year orbital period would place the gravitational wave emission directly in the pulsar timing band. Since the first pulsar timing array study of 3C66B, revised models of the source have been published, and timing array sensitivities and techniques have improved dramatically. With these advances, we further constrain the chirp mass of the potential supermassive black hole binary in 3C66B to less than $(1.65\pm0.02) \times 10^9~{M_\odot}$ using data from the NANOGrav 11-year data set. This upper limit provides a factor of 1.6 improvement over previous limits, and a factor of 4.3 over the first search done. Nevertheless, the most recent orbital model for the source is still consistent with our limit from pulsar timing array data. In addition, we are able to quantify the improvement made by the inclusion of source properties gleaned from electromagnetic data to `blind' pulsar timing array searches. With these methods, it is apparent that it is not necessary to obtain exact a priori knowledge of the period of a binary to gain meaningful astrophysical inferences.Comment: 14 pages, 6 figures. Accepted by Ap

Unanticipated Insights into Biomedicine from the Study of Acupuncture

Research into acupuncture has had ripple effects beyond the field of acupuncture. This paper identifies five exemplars to illustrate that there is tangible evidence of the way insights gleaned from acupuncture research have informed biomedical research, practice, or policy. The first exemplar documents how early research into acupuncture analgesia has expanded into neuroimaging research, broadening physiologic understanding and treatment of chronic pain. The second describes how the acupuncture needle has become a tool to enhance biomedical knowledge of connective tissue. The third exemplar, which illustrates use of a modified acupuncture needle as a sham device, focuses on emergent understanding of placebo effects and, in turn, on insights into therapeutic encounters in treatments unrelated to acupuncture. The fourth exemplar documents that two medical devices now in widespread use were inspired by acupuncture: transcutaneous electrical nerve stimulators for pain control and antinausea wrist bands. The final exemplar describes how pragmatic clinical trial designs applied in acupuncture research have informed current general interest in comparative effectiveness research. In conclusion, these exemplars of unanticipated outcomes of acupuncture research comprise an additional rationale for continued support of basic and clinical research evaluating acupuncture and other under-researched therapies

An Unusual Pulse Shape Change Event in PSR J1713+0747 Observed with the Green Bank Telescope and CHIME

The millisecond pulsar J1713+0747 underwent a sudden and significant pulse shape change between 2021 April 16 and 17 (MJDs 59320 and 59321). Subsequently, the pulse shape gradually recovered over the course of several months. We report the results of continued multifrequency radio observations of the pulsar made using the Canadian Hydrogen Intensity Mapping Experiment and the 100 m Green Bank Telescope in a 3 yr period encompassing the shape change event, between 2020 February and 2023 February. As of 2023 February, the pulse shape had returned to a state similar to that seen before the event, but with measurable changes remaining. The amplitude of the shape change and the accompanying time-of-arrival residuals display a strong nonmonotonic dependence on radio frequency, demonstrating that the event is neither a glitch (the effects of which should be independent of radio frequency, ν) nor a change in dispersion measure alone (which would produce a delay proportional to ν−2). However, it does bear some resemblance to the two previous "chromatic timing events" observed in J1713+0747, as well as to a similar event observed in PSR J1643−1224 in 2015

An unusual pulse shape change event in PSR J1713+0747 observed with the Green Bank Telescope and CHIME

The millisecond pulsar J1713+0747 underwent a sudden and significant pulse shape change between April 16 and 17, 2021 (MJDs 59320 and 59321). Subsequently, the pulse shape gradually recovered over the course of several months. We report the results of continued multi-frequency radio observations of the pulsar made using the Canadian Hydrogen Intensity Mapping Experiment (CHIME) and the 100-meter Green Bank Telescope (GBT) in a three-year period encompassing the shape change event, between February 2020 and February 2023. As of February 2023, the pulse shape had returned to a state similar to that seen before the event, but with measurable changes remaining. The amplitude of the shape change and the accompanying TOA residuals display a strong non-monotonic dependence on radio frequency, demonstrating that the event is neither a glitch (the effects of which should be independent of radio frequency, $\nu$) nor a change in dispersion measure (DM) alone (which would produce a delay proportional to $\nu^{-2}$). However, it does bear some resemblance to the two previous "chromatic timing events" observed in J1713+0747 (Demorest et al. 2013; Lam et al. 2016), as well as to a similar event observed in PSR J1643-1224 in 2015 (Shannon et al. 2016).Comment: 19 pages, 8 figures. Submitted to ApJ. Data available at https://doi.org/10.5281/zenodo.723645

In Situ Compatibilization of Biopolymer Ternary Blends by Reactive Extrusion with Low-Functionality Epoxy-Based Styrene Acrylic Oligomer

[EN] The present study reports on the use of low-functionality epoxy-based styrene¿acrylic oligomer (ESAO) to compatibilize immiscible ternary blends made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), polylactide (PLA), and poly(butylene adipate-co-terephthalate) (PBAT). The addition during melt processing of low-functionality ESAO at two parts per hundred resin (phr) of biopolymer successfully changed the soften inclusion phase in the blend system to a thinner morphology, yielding biopolymer ternary blends with higher mechanical ductility and also improved oxygen barrier performance. The compatibilization achieved was ascribed to the in situ formation of a newly block terpolymer, i.e. PHBVb- PLA-b-PBAT, which was produced at the blend interface by the reaction of the multiple epoxy groups present in ESAO with the functional terminal groups of the biopolymers. This chemical reaction was mainly linear due to the inherently low functionality of ESAO and the more favorable reactivity of the epoxy groups with the carboxyl groups of the biopolymers, which avoided the formation of highly branched and/or cross-linked structures and thus facilitated the films processability. Therefore, the reactive blending of biopolymers at different mixing ratios with low-functionality ESAO represents a straightforward methodology to prepare sustainable plastics at industrial scale with different physical properties that can be of interest in, for instance, food packaging applications.This research was funded by the EU H2020 project YPACK (Reference number 773872) and by the Spanish Ministry of Science, Innovation, and Universities (MICIU) with project numbers MAT2017-84909-C2-2-R and AGL2015-63855-C2-1-R. L. Quiles-Carrillo wants to thank the Spanish Ministry of Education, Culture, and Sports (MECD) for financial support through his FPU Grant Number FPU15/03812. Torres-Giner also acknowledges the MICIU for his Juan de la Cierva contract (IJCI-2016-29675).Quiles-Carrillo, L.; Montanes, N.; Lagaron, J.; Balart, R.; Torres-Giner, S. (2019). In Situ Compatibilization of Biopolymer Ternary Blends by Reactive Extrusion with Low-Functionality Epoxy-Based Styrene Acrylic Oligomer. Journal of Polymers and the Environment. 27(1):84-96. https://doi.org/10.1007/s10924-018-1324-2S8496271Babu RP, O’Connor K, Seeram R (2013) Prog Biomater 2:8Torres-Giner S, Torres A, Ferrándiz M, Fombuena V, Balart R (2017) J Food Saf 37:e12348Quiles-Carrillo L, Montanes N, Boronat T, Balart R, Torres-Giner S (2017) Polym Test 61:421Zakharova E, Alla A, Martínez A, De Ilarduya S, Muñoz-Guerra (2015) RSC Adv 5:46395Steinbüchel A, Valentin HE (1995) FEMS Microbiol Lett 128:219McChalicher CWJ, Srienc F (2007) J Biotechnol 132:296Reis KC, Pereira J, Smith AC, Carvalho CWP, Wellner N, Yakimets I (2008) J Food Eng 89:361Vink ETH, Davies S (2015) Ind Biotechnol 11:167John RP, Nampoothiri KM, Pandey A (2006) Process Biochem 41:759Madhavan Nampoothiri K, Nair NR, John RP (2010) Biores Technol 101:8493Garlotta D (2001) J Polym Environ 9:63Lim LT, Auras R, Rubino M (2008) Prog Polym Sci 33:820Quiles-Carrillo L, Montanes N, Sammon C, Balart R, Torres-Giner S (2018) Ind Crops Prod 111:878Quiles-Carrillo L, Blanes-Martínez MM, Montanes N, Fenollar O, Torres-Giner S, Balart R (2018) Eur Polym J 98:402Witt U, Müller R-J, Deckwer W-D (1997) J Environ Polym Degrad 5:81Siegenthaler KO, Künkel A, Skupin G, Yamamoto M (2012) Ecoflex® and Ecovio®: biodegradable, performance-enabling plastics. In: Rieger B, Künkel A, Coates GW, Reichardt R, Dinjus E, Zevaco TA (eds) Synthetic biodegradable polymers. Springer, Berlin Heidelberg, p 91Jiang L, Wolcott MP, Zhang J (2006) Biomacromol 7:199Brandelero RPH, Yamashita F, Grossmann MVE (2010) Carbohyd Polym 82:1102Muthuraj R, Misra M, Mohanty AK (2014) J Polym Environ 22:336Porter RS, Wang L-H (1992) Polymer 33(10): 2019Koning C, Van Duin M, Pagnoulle C, Jerome R (1998) Prog Polym Sci 23:707Muthuraj R, Misra M, Mohanty AK (2017) J Appl Polym Sci 135:45726Ryan AJ (2002) Nat Mater 1:8Wu D, Zhang Y, Yuan L, Zhang M, Zhou W (2010) J Polym Sci Part B 48:756Kim CH, Cho KY, Choi EJ, Park JK (2000) J Appl Polym Sci 77:226Supthanyakul R, Kaabbuathong N, Chirachanchai S (2016) Polymer 105:1Na Y-H, He Y, Shuai X, Kikkawa Y, Doi Y, Inoue Y (2002) Biomacromolecules 3:1179Zeng J-B, Li K-A, Du A-K (2015) RSC Adv 5:32546Xanthos M, Dagli SS (1991) Polym Eng Sci 31:929Sundararaj U, Macosko CW (1995) Macromolecules 28:2647Milner ST, Xi H (1996) J Rheol 40:663Villalobos M, Awojulu A, Greeley T, Turco G, Deeter G (2006) Energy 31:3227Torres-Giner S, Montanes N, Boronat T, Quiles-Carrillo L, Balart R (2016) Eur Polym J 84:693Lehermeier HJ, Dorgan JR (2001) Polym Eng Sci 41:2172Liu B, Xu Q (2013) J Mater Sci Chem Eng 1:9Eslami H, Kamal MR (2013) J Appl Polym Sci 129:2418Loontjens T, Pauwels K, Derks F, Neilen M, Sham CK, Serné M (1997) J Appl Polym Sci 65:1813Ojijo V, Ray SS (2015) Polymer 80:1Frenz V, Scherzer D, Villalobos M, Awojulu AA, Edison M, Van Der Meer R (2008) Multifunctional polymers as chain extenders and compatibilizers for polycondensates and biopolymers. In: Technical papers, regional technical conference—society of plastics engineers, p. 3/1678Utracki LA (2002) Can J Chem Eng 80:1008Al-Itry R, Lamnawar K, Maazouz A (2012) Polym Degrad Stab 97:1898Lin S, Guo W, Chen C, Ma J, Wang B (2012) Mater Des (1980–2015) 36: 604Arruda LC, Magaton M, Bretas RES, Ueki MM (2015) Polym Test 43:27Wang Y, Fu C, Luo Y, Ruan C, Zhang Y, Fu Y (2010) J Wuhan Univ Technol Mater Sci Ed 25:774Wei D, Wang H, Xiao H, Zheng A, Yang Y (2015) Carbohyd Polym 123:275Abdelwahab MA, Taylor S, Misra M, Mohanty AK (2015) Macromol Mater Eng 300:299Sun Q, Mekonnen T, Misra M, Mohanty AK (2016) J Polym Environ 24:23Torres-Giner S, Gimeno-Alcañiz JV, Ocio MJ, Lagaron JM (2011) J Appl Polym Sci 122:914Miyata T, Masuko T (1998) Polymer 39:5515Muthuraj R, Misra M, Mohanty AK (2015) J Appl Polym Sci 132:42189Ren J, Fu H, Ren T, Yuan W (2009) Carbohyd Polym 77:576Torres-Giner S, Montanes N, Fenollar O, García-Sanoguera D, Balart R (2016) Mater Des 108:648Jamshidian M, Tehrany EA, Imran M, Jacquot M, Desobry S (2010) Compr Rev Food Sci Food Saf 9:552Savenkova L, Gercberga Z, Nikolaeva V, Dzene A, Bibers I, Kalnin M (2000) Process Biochem 35:573Costa ARM, Almeida TG, Silva SML, Carvalho LH, Canedo EL (2015) Polym Test 42:115Zhang K, Mohanty AK, Misra M (2012) ACS Appl Mater Interfaces 4:3091Zhang N, Wang Q, Ren J, Wang L (2009) J Mater Sci 44:250Chinsirikul W, Rojsatean J, Hararak B, Kerddonfag N, Aontee A, Jaieau K, Kumsang P, Sripethdee C (2015) Packag Technol Sci 28:741Auras R, Harte B, Selke S (2004) J Appl Polym Sci 92:1790Sanchez-Garcia MD, Gimenez E, Lagaron JM (2008) Carbohyd Polym 71:235Sanchez-Garcia MD, Gimenez E, Lagaron JM (2007) J Plast Film Sheeting 23:133Lagaron JM (2011) Multifunctional and nanoreinforced polymers for food packaging. In: Multifunctional and nanoreinforced polymers for food packaging. Woodhead Publishing, Cambridge, p