Modular 3D-Printed Peg Biofilm Device for Flexible Setup of Surface-Related Biofilm Studies

Medical device-related biofilms are a major cause of hospital-acquired infections, especially chronic infections. Numerous diverse models to study surface-associated biofilms have been developed; however, their usability varies. Often, a simple method is desired without sacrificing throughput and biological relevance. Here, we present an in-house developed 3D-printed device (FlexiPeg) for biofilm growth, conceptually similar to the Calgary Biofilm device but aimed at increasing ease of use and versatility. Our device is modular with the lid and pegs as separate units, enabling flexible assembly with up- or down-scaling depending on the aims of the study. It also allows easy handling of individual pegs, especially when disruption of biofilm populations is needed for downstream analysis. The pegs can be printed in, or coated with, different materials to create surfaces relevant to the study of interest. We experimentally validated the use of the device by exploring the biofilms formed by clinical strains of Escherichia coli and Klebsiella pneumoniae, commonly associated with device-related infections. The biofilms were characterized by viable cell counts, biomass staining, and scanning electron microscopy (SEM) imaging. We evaluated the effects of different additive manufacturing technologies, 3D printing resins, and coatings with, for example, silicone, to mimic a medical device surface. The biofilms formed on our custom-made pegs could be clearly distinguished based on species or strain across all performed assays, and they corresponded well with observations made in other models and clinical settings, for example, on urinary catheters. Overall, our biofilm device is a robust, easy-to-use, and relevant assay, suitable for a wide range of applications in surface-associated biofilm studies, including materials testing, screening for biofilm formation capacity, and antibiotic susceptibility testing

A Multiplex Fluidic Chip for Rapid Phenotypic Antibiotic Susceptibility Testing

Many patients with severe infections receive inappropriate empirical treatment, and rapid detection of bacterial antibiotic susceptibility can improve clinical outcome and reduce mortality. To this end, we have developed a multiplex fluidic chip for rapid phenotypic antibiotic susceptibility testing of bacteria. A total of 21 clinical isolates of Escherichia coli, Klebsiella pneumoniae, and Staphylococcus aureus were acquired from the EUCAST Development Laboratory and tested against amikacin, ceftazidime, and meropenem (Gram-negative bacteria) or gentamicin, ofloxacin, and tetracycline (Gram-positive bacteria). The bacterial samples were mixed with agarose and loaded in an array of growth chambers in the chip where bacterial microcolony growth was monitored over time using automated image analysis. MIC values were automatically obtained by tracking the growth rates of individual microcolonies in different regions of antibiotic gradients. Stable MIC values were obtained within 2 to 4 h, and the results showed categorical agreement with reference MIC values as determined by broth microdilution in 86% of the cases

Combination of polymyxin B and minocycline against multidrug-resistant Klebsiella pneumoniae : interaction quantified by pharmacokinetic/pharmacodynamic modelling from in vitro data

Lack of effective treatment for multidrug-resistant Klebsiella pneumoniae (MDR-Kp) necessitates finding and optimising combination therapies of old antibiotics. The aims of this study were to quantify the combined effect of polymyxin B and minocycline by building an in silico semi-mechanistic pharmacokinetic/pharmacodynamic (PKPD) model and to predict bacterial kinetics when exposed to the drugs alone and in combination at clinically achievable unbound drug concentration-time profiles. A clinical K. pneumoniae strain resistant to polymyxin B [minimum inhibitory concentration (MIC) = 16 mg/L] and minocycline (MIC = 16 mg/L) was selected for extensive in vitro static time-kill experiments. The strain was exposed to concentrations of 0.0625-48 ? MIC, with seven samples taken per experiment for viable counts during 0-28 h. These observations allowed the development of the PKPD model. The final PKPD model included drug-induced adaptive resistance for both drugs. Both the minocycline-induced bacterial killing and resistance onset rate constants were increased when polymyxin B was co-administered, whereas polymyxin B parameters were unaffected. Predictions at clinically used dosages from the developed PKPD model showed no or limited antibacterial effect with monotherapy, whilst combination therapy kept bacteria below the starting inoculum for 20 h at high dosages [polymyxin B 2.5 mg/kg + 1.5 mg/kg every 12 h (q12h); minocycline 400 mg + 200 mg q12h, loading + maintenance doses]. This study suggests that polymyxin B and minocycline in combination may be of clinical benefit in the treatment of infections by MDR-Kp and for isolates that are non-susceptible to either drug alone. (C) 2020 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license. (http://creativecommons.org/licenses/by-nc-nd/4.0/

Evolution of high-level resistance during low-level antibiotic exposure

It has become increasingly clear that low levels of antibiotics present in many environments can select for resistant bacteria, yet the evolutionary pathways for resistance development during exposure to low amounts of antibiotics remain poorly defined. Here we show that Salmonella enterica exposed to sub-MIC levels of streptomycin evolved high-level resistance via novel mechanisms that are different from those observed during lethal selections. During lethal selection only rpsL mutations are found, whereas at sub-MIC selection resistance is generated by several small-effect resistance mutations that combined confer high-level resistance via three different mechanisms: (i) alteration of the ribosomal RNA target (gidB mutations), (ii) reduction in aminoglycoside uptake (cyoB, nuoG, and trkH mutations), and (iii) induction of the aminoglycoside-modifying enzyme AadA (znuA mutations). These results demonstrate how the strength of the selective pressure influences evolutionary trajectories and that even weak selective pressures can cause evolution of high-level resistance

Efficacy of Antibiotic Combinations against Multidrug-Resistant Pseudomonas aeruginosa in Automated Time-Lapse Microscopy and Static Time-Kill Experiments

Antibiotic combination therapy is used for severe infections caused by multidrug-resistant (MDR) Gram-negative bacteria, yet data regarding which combinations are most effective are lacking. This study aimed to evaluate the in vitro efficacy of polymyxin B in combination with 13 other antibiotics against four clinical strains of MDR Pseudomonas aeruginosa. We evaluated the interactions of polymyxin B in combination with amikacin, aztreonam, cefepime, chloramphenicol, ciprofloxacin, fosfomycin, linezolid, meropenem, minocycline, rifampin, temocillin, thiamphenicol, or trimethoprim by automated time-lapse microscopy using predefined cutoff values indicating inhibition of growth (<= 10(6) CFU/ml) at 24 h. Promising combinations were subsequently evaluated in static time-kill experiments. All strains were intermediate or resistant to polymyxin B, antipseudomonal beta-lactams, ciprofloxacin, and amikacin. Genes encoding beta-lactamases (e.g., bla(PAO) and bla(OXA-50)) and mutations associated with permeability and efflux were detected in all strains. In the time-lapse microscopy experiments, positive interactions were found with 39 of 52 antibiotic combination/bacterial strain setups. Enhanced activity was found against all four strains with polymyxin B used in combination with aztreonam, cefepime, fosfomycin, minocycline, thiamphenicol, and trimethoprim. Time-kill experiments showed additive or synergistic activity with 27 of the 39 tested polymyxin B combinations, most frequently with aztreonam, cefepime, and meropenem. Positive interactions were frequently found with the tested combinations, against strains that harbored several resistance mechanisms to the single drugs, and with antibiotics that are normally not active against P. aeruginosa. Further study is needed to explore the clinical utility of these combinations

Evaluation of polymyxin B in combination with 13 other antibiotics against carbapenemase-producing Klebsiella pneumoniae in time-lapse microscopy and time-kill experiments

Objectives: This study aimed to explore the interactions of polymyxin B in combination with 13 other antibiotics against carbapenemase-producing Klebsiella pneumoniae. Methods: Five clinical isolates of multidrug-resistant K. pneumoniae producing KPC-2, KPC-3, NDM-1, OXA-48 and VIM-1 carbapenemases were used. Polymyxin B was tested alone and in combination with amikacin, aztreonam, cefepime, chloramphenicol, ciprofloxacin, fosfomycin, linezolid, meropenem, minocycline, rifampicin, temocillin, thiamphenicol and trimethoprim. Inhibition of growth during antibiotic exposure was evaluated in 24-hr automated time-lapse microscopy experiments. Combinations that showed positive interactions were subsequently evaluated in static time-kill experiments. Results: All strains carried multiple (>9) resistance genes as determined by whole-genome sequencing. In the initial screening the combination of polymyxin B and minocycline was most active with enhanced activity compared with the single antibiotics detected against all strains. Positive interactions were also observed with polymyxin B in combination with rifampicin and fosfomycin against four of five strains and less frequently with other antibiotics. Time-kill experiments demonstrated an additive or synergistic activity (1-2 log10 or >= 2 log(10) CFU/mL reduction, respectively, compared with the most potent single antibiotic) with 21 of 23 tested combinations. However, because of regrowth, only 13 combinations were synergistic at 24 hr. Combinations with minocycline or rifampicin were most active, each showing synergy and bacteriostatic or bactericidal effects resulting in 1.93-3.97 and 2.55-5.91 log(10) CFU/mL reductions, respectively, after 24 hr against four strains. Discussion: Polymyxin B in combination with minocycline, rifampicin or fosfomycin could be of potential clinical interest. Time-lapse microscopy showed some discrepancy in results compared with the time-kill data but was useful for screening purposes