33 research outputs found

    Smile Arc Esthetics in Middle-Aged Man from the Layperson’s Perspective Via Eye-Tracking

    Get PDF
    Objective: To evaluate the perceptions of smile esthetics associated with variations in the vertical plane of the maxillary incisors in the smile arc using eye-tracking software. Material and Methods: An image of a 59-year-old Caucasian male model was adapted and edited to make three changes in the vertical plane, simulating a convex, straight, and reverse smile arc. Four areas of interest were inserted at the right and left eyes, nose, and mouth. Forty laypeople raters between 18 and 45 years of age participated of the study. Eye-tribe hardware and Ogama software were used to perform eye-tracking. Attractiveness and age-perception questions were also incorporated into the study. ANOVA test and Pearson’s correlation coefficient, at p < 0.05. Results: The most observed AOI in images with convex, straight, and reverse smiles, as assessed using heatmaps and point maps, was the mouth, followed by the right eye. A significant difference for the eye (p=0.02) was found when comparing convex and reverse smiles, whereas a significant difference for the mouth was observed between the straight and reverse smiles (p=0.03). Conclusion: Convex and straight smile arcs were associated with equal levels of attractiveness; the reverse smile was less attractive. No significant difference was noticed regarding age perception and the smile arcs. However, the reverse smile recorded a more complete fixation time

    Prototype of a new tip developed to be coupled to dental light-curing units for optimizing bonding of orthodontic brackets and accessories

    Get PDF
    OBJECTIVE: development of a new device to be coupled to light-curing units for bonding orthodontic brackets and accessories, and test its efficacy in an in vitro mechanical trial. The inner surface of the device is mirrored and is based on physical concepts of light refraction and reflection. The main advantage of such device is the reduced clinical time needed for bonding and the low possibility of contamination during the process. METHODS: One hundred and twenty specimens were used for testing the shear bond strength of brackets bonded with the device. The Adhesive Remnant Index (ARI) was also determined. The sample was divided into 2 groups. In group 1 a halogen light-curing unit was used while in group 2 a led light-curing unit was used. Each group was then subdivided. In subgroups H1 and L1, a conventional light guide rod was used while in subgroups H2 and L2 bonding was performed with the mirrored device coupled to the tip of the guide light rod. RESULTS: The values obtained for the shear bond strength and the ARI in the subgroups were compared. Results showed that there was no statistically significant difference for the shear strength (p > 0.05) and the ARI (p > 0.05) between the subgroups. CONCLUSION: The tests of mechanical trials and the ARI analysis showed that the new device fulfilled the requirements for bonding orthodontic accessories, and that the time for bonding was reduced to half, being necessary only one light exposure.OBJETIVO: desenvolver uma nova ponteira para ser acoplada aos aparelhos fotopolimerizadores utilizados para colagem de braquetes e acessórios ortodônticos, e testar sua da efetividade em ensaio mecânico in vitro. A ponteira é espelhada na superfície interna e baseia-se em conceitos físicos de refração e reflexão de luz. Apresenta como principal vantagem o menor tempo clínico durante o procedimento de colagem, reduzindo a possibilidade de contaminação durante o processo. MÉTODOS: por meio de ensaio de resistência ao cisalhamento e determinação do índice remanescente de adesivo (IRA), testou-se a ponteira desenvolvida em 120 corpos de prova. A amostra foi dividia em dois grupos. No grupo 1, foi utilizado aparelho fotopolimerizador de fonte de luz halógena e, no grupo 2, fonte de LED. Cada grupo foi subdividido. Nos subgrupos H1 e L1, utilizou-se a ponteira convencional. Nos subgrupos H2 e L2 a colagem foi feita utilizando a ponteira desenvolvida para a polimerização do material de colagem. RESULTADOS: os valores dos testes de cisalhamento e IRA para os subgrupos foram comparados entre si. Os resultados mostraram que não houve diferença estatisticamente significativa para o ensaio de resistência ao cisalhamento (p > 0,05) nem para o IRA (p > 0,05) entre os subgrupos. CONCLUSÃO: os testes de ensaio mecânico, assim como a análise do IRA, mostraram que a nova ponteira desenvolvida cumpriu os requisitos necessários à colagem dos acessórios ortodônticos, e que o tempo de colagem foi reduzido pela metade, sendo necessária uma só incidência

    Assessment of pain experience in adults and children after bracket bonding and initial archwire insertion

    Get PDF
    INTRODUCTION: Ninety five percent of orthodontic patients routinely report pain, due to alterations in the periodontal ligament and surrounding soft tissues, with intensity and prevalence varying according to age. OBJECTIVE: This study aimed to assess toothache and buccal mucosal pain in adults and children during two initial phases of the orthodontic treatment. METHODS: The intensity of toothache and buccal mucosal pain reported by 20 patients, 10 children (11-13 years) and 10 adults (18-37 years) was recorded with the aid of a Visual Analog Scale (VAS), during 14 days - 7 days with bonded brackets only and 7 days with the initial archwire inserted. RESULTS: There was no significant difference in pain intensity among adults and children. After bracket bonding, 50% of the children and 70% of the adults reported pain. 70% of both groups reported pain after initial archwire insertion. While adults reported constant, low intensity, buccal mucosal pain, the children showed great variation of pain intensity, but with a trend towards decreasing pain during the assessment period. After initial archwire insertion the peaks of toothache intensity and prevalence occurred 24 hours in children and 48 hours in adults. CONCLUSIONS: In general, children reported pain less frequently than adults did, though with greater intensity.INTRODUÇÃO: durante o tratamento ortodôntico, os pacientes rotineiramente relatam situações de dor, que ocorrem em até 95% dos casos. Essa dor é proveniente de alterações no ligamento periodontal e nos tecidos moles circundantes, e a sua intensidade e prevalência variam de acordo com a faixa etária dos pacientes. OBJETIVO: o objetivo desse estudo foi avaliar a experiência de dor nos dentes e na mucosa bucal em pacientes adultos e crianças durante duas fases iniciais do tratamento ortodôntico. MÉTODOS: a intensidade de dor nos dentes e na mucosa bucal relatada por 20 pacientes, 10 crianças (11-13 anos) e 10 adultos (18-37 anos), foi registrada com uma Escala Visual Analógica (EVA) durante 14 dias, sendo 7 dias apenas com os braquetes colados e 7 dias com o arco inicial inserido. RESULTADOS: não houve diferença significativa na intensidade de dor entre adultos e crianças. Após a colagem dos braquetes, 50% das crianças e 70% dos adultos relataram dor; e, após a inserção do arco inicial, a prevalência de relatos foi de 70% para ambos os grupos. Os adultos relataram dores constantes e de baixa intensidade na mucosa bucal, enquanto as crianças mostraram grande variação na intensidade, porém com tendência de diminuição durante o período de avaliação. Os picos de intensidade e prevalência de dor nos dentes ocorreram, respectivamente para crianças e adultos, 24h e 48h após a inserção do arco inicial. CONCLUSÃO: de modo geral, as crianças exibiram menor prevalência de relatos de dor, porém com maior intensidade do que os adultos

    Avaliação da aplicação do adesivo líquido na resistência ao cisalhamento apresentada por bráquetes ortodônticos metálicos colados com resina autoplimerizável e fotopolimerizável

    Get PDF
    -O objetivo deste estudo foi avaliar a resistência ao cisalhamento apresentada por bráquetes ortodônticos colados com resinas autopolimerizáveis e fotopolimerizáveis com e sem a aplicação da resina líquida durante o processo de colagem; determinar o IRA -Índice Remanescente de Adesivo- em cada grupo e se a ruptura ocorreu na interface bráquete/resina ou resina/esmalte após o teste de resistência ao cisalhamento em cada grupo. Foram utilizadas a resina autopolimerizável -3M Concise Ortodôntico®- e a resina fotopolimerizável -3M Transbond XT-. Os dentes bovinos após limpos foram armazenados em solução de timol 0,1% durante 7 dias à temperatura ambiente. Após este período, foram removidos os tecidos moles remanescentes, cálculos e fragmentos ósseos e os dentes armazenados em água destilada a 4ºC, trocada periodicamente até o momento da experimentação. Os 60 dentes foram divididos em dois grupos para a colagem com resina autopolimerizável e fotopolimerizável. Dentro de cada grupo formaram-se dois subgrupos de 15 dentes, nos quais em um houve a aplicação de resina líquida e no outro não. Após a colagem, houve inclusão dos dentes na resina acrílica com o auxílio de um dispositivo guia confeccionado com fio de aço retangular 0,021’’ x 0,025’’. Os corpos de prova foram submetidos ao teste de cisalhamento na máquina de ensaio universal EMIC – modelo DL 10000. Na análise estatística verificou-se diferença estatisticamente significativa entre os grupos colados com resina fotopolimerizável sem aplicação de resina líquida e os colados com resina autopolimerizável com p=0,004 e sem aplicação de resina líquida -p=0,015-. Apesar das resinas fotopolimerizáveis apresentarem menores médias ao teste de resistência ao cisalhamento, todos os grupos apresentaram medias acima das aceitáveis para a utilização na colagem de bráquetes ortodônticos (6 a 8 Mpa). Quanto ao adesivo remanescente, observou-se que tanto com ou sem a aplicação de resina líquida para as resinas autopolimerizáveis, a fratura ocorreu predominantemente na interface bráquete/resina. Já nas resinas fotopolimerizáveis, a ruptura foi predominantemente na interface resina/esmalte

    Invisalign Therapy in a Case of Mandibular Incisor Extraction

    Get PDF
    Clear aligners have been sought by patients as an aesthetic alternative to conventional orthodontic treatment. Despite the limitation that the aligner system offers, its use has improved over time. Hereby, authors discusses case of a 35-year-old female with Angle’s Class I malocclusion patient with severe mandibular crowding who was treated with mandibular incisor extraction using the Invisalign system. Clinical and radiographic examination revealed skeletal Class I malocclusion, severe crowding of the lower incisors, light crowding of the upper incisors, crossbite of the mandibular right canine, a convex profile, prominent lower lip, and a Bolton discrepancy in the lower anterior region. Fourteen trays were used in the maxillary arch and 28 in the mandibular arch. Two additional refinements, one with 13 and the other with 10 trays were delivered. After 2 years and 2 months of active treatment, good posterior occlusion and alignment of the teeth with adequate occlusion function and a balanced smile were achieved. The maxillary retainer was used continuously for 1 year, and at night until now. Successful tooth alignment and space closure were maintained, and the patient was satisfied with the results on the 2 year follow-up

    Influência do ponto de contato proximal na crista óssea alveolar em dentes movidos pala locais de extrações dentárias: um estudo piloto

    Get PDF
    Introduction: The opening of the contact point can happen after orthodontic closure of the site of dental extraction and opened interproximal contacts are considered potential factors for periodontal diseases. Objective: To evaluate the condition of the alveolar bone crest of the interdental site between canines and upper premolars with or without contact points in individuals submitted to orthodontics associated with the extraction of the first premolars. Material and Methods: This cross-sectional observational study selected upper canines and premolars of individuals undergoing orthodontic treatment without extractions (12 hemiarches – control group), or with extraction of the upper first premolars and whose canines and second premolars had interproximal contact (11 hemiarches – group 1) or diastema (15 hemiarches – group 2). The height and the presence of lamina dura in the interproximal bone crest of the distal surfaces of canines and mesial surfaces of premolars were evaluated. Results: Groups 1 and 2 demonstrated the higher and smallest prevailing of the presence of lamina dura, respectively. The control group presented the bone crest positioned more crownly in relation to the others groups. Experimental groups did not present significant differences to the height of bone crest. Conclusion: The orthodontic allocation of teeth to extraction sites was associated with the significant reduction of the height of the marginal bone crest, regardless of the presence or absence of contact point between the teeth. The lack of contact point resulted in a minor prevalence of the continuity of the lamina dura of the alveolar bone crest in these regions.Introdução: A abertura do ponto de contato pode ocorrer após o fechamento ortodôntico do sítio de extração dentária e os contatos interproximais abertos são considerados fatores potenciais para as doenças periodontais. Objetivo: Avaliar a condição da crista óssea alveolar do espaço interdentário entre caninos e pré-molares superiores com ou sem pontos de contato em indivíduos submetidos a tratamento ortodôntico associado à exodontia dos primeiros pré-molares. Material e Métodos: Este estudo transversal observacional selecionou caninos e pré-molares superiores de indivíduos submetidos a tratamento ortodôntico sem extrações (12 hemiarcos – grupo controle), ou com exodontia dos primeiros pré-molares superiores e cujos caninos e segundos pré-molares tiveram contato interproximal (11 hemiarcos – grupo 1) ou diastemas (15 hemiarcos – grupo 2). Foram avaliadas a altura e a presença da lâmina dura na crista óssea interproximal das superfícies distais dos caninos e mesiais dos pré-molares. Resultados: Os grupos 1 e 2 demonstraram a maior e a menor prevalência da presença de lâmina dura, respectivamente. O grupo controle apresentou a crista óssea posicionada mais coronalmente em relação aos demais grupos. Entre os grupos experimentais, não houve diferença significativa para a altura da crista óssea. Conclusão: Neste estudo preliminar, a movimentação ortodôntica dos dentes para os locais de exodontia foi associada à redução significativa da altura da crista óssea marginal, independentemente da presença ou ausência de ponto de contato entre os dentes. A falta de ponto de contato resultou em menor prevalência de continuidade da lâmina dura da crista óssea alveolar nessas regiões

    Clinical evaluation of dental alignment and leveling with three different

    Get PDF
    INTRODUCTION: A wide variety of orthodontic wires made of different alloys is available to be used in orthodontic practice and may produce different clinical responses during tooth movement. OBJECTIVE: This research evaluated the alignment and leveling of lower dental arches after the use of three types of orthodontic wires. METHODS: A sample of 36 patients was randomly divided into 3 groups: stainless steel, multistranded steel and superelastic nickel-titanium, according to the first leveling arches used. In order to observe differences in tooth position and axial inclination of the lower incisors, all patients had lateral cephalometric radiographs taken before the insertion of the first arches and 2 months later. The irregularity index and the curve of Spee were measured, compared between groups and considered influential on the proclination of incisors during the initial phase of alignment and leveling. The Reflex microscope was used to measure the irregularity index, whereas the ANOVA analysis of variance was used to verify differences between groups with regard to the degree of dental alignment and leveling. RESULTS: There were significant differences between groups only at T2 for the irregularity index. CONCLUSION: The NiTi and multistranded steel wires showed greater aligning capacity when compared with stainless steel wires.INTRODUÇÃO: uma grande variedade de fios ortodônticos, compostos por diferentes ligas, está disponível para utilização ortodôntica, podendo gerar respostas clínicas diversas, durante a movimentação dentária. OBJETIVO: este trabalho visa a avaliar o alinhamento e nivelamento das arcadas dentárias inferiores, após a utilização de três tipos de fios ortodônticos. MÉTODOS: uma amostra de 36 pacientes foi aleatoriamente dividida em três grupos, de acordo com os primeiros arcos utilizados para o alinhamento e nivelamento: aço inoxidável convencional, aço multifilamentado e de níquel-titânio superelástico. Para se avaliar as diferenças relacionadas ao posicionamento dentário e inclinação axial dos incisivos inferiores, foram obtidas radiografias cefalométricas de perfil, de todos os pacientes, em duas fases do tratamento: antes da inserção dos primeiros arcos e dois meses após a inserção dos mesmos. O índice de irregularidade dentária (IID) e a profundidade inicial de curva de Spee, fatores influentes sobre a projeção de incisivos durante a fase inicial de alinhamento e nivelamento, foram avaliados e comparados intra- e intergrupos. Para a medição do IID, foi utilizado o Reflex Microscope, possibilitando a mensuração do grau de alinhamento e nivelamento dentário em terceira dimensão. A análise de variância (ANOVA) foi utilizada para se avaliar as diferenças intergrupos em relação ao grau de alinhamento e nivelamento dentário. RESULTADOS: diferenças estatisticamente significativas intergrupos somente foram encontradas em T2, em relação ao índice de irregularidade dentária, já que os fios de NiTi e aço multifilamentado apresentaram maior capacidade de alinhamento do que os fios de aço inoxidável convencionais

    Judicial Vulnerability on the Exercise of Orthodontics: Construction and Validation of a Questionnaire

    Get PDF
    Objective: To develop and validate a questionnaire to measure the vulnerability of orthodontists, measuring the risks of being involved in civil liability lawsuits. Material and Methods: In-depth interviews were performed with three groups: G1- law professionals, G2 – orthodontists, and G3 – orthodontic patients. From the analysis of the content of Bardin, domains for the construction of the first version of the 53-question questionnaire were identified. The questionnaire was submitted to experts for validation, inclusion and exclusion of questions, but maintaining the 53-question format. It was submitted to the test-retest phases and verification of internal consistency. Results: 247 professionals answered the final version of the questionnaire. The intraclass correlation coefficient was 88.8%. Cronbach's alpha was 0.946, with high internal consistency. The Kaiser-Meyer-Olkin and Bartlett’s tests confirmed internal consistency showing the values of 0.909 and significance of <0.001, respectively. From the total score and factorial analysis, the sample was divided into three groups of judicial vulnerability. Conclusion: The results of this study demonstrated that the questionnaire is a valid tool to measure the risks of involvement in civil liability lawsuits by orthodontists. It presented a multidimensional character and might be applied as well as face to face or online, without prejudice to quality

    Estudo comparativo entre cefalometria manual e computadorizada (análise de Steiner, Tweed e Downs) em telerradiografias laterais

    No full text
    Em uma amostra de brasileiros, portadores de oclusão normal, determinou-se os valores angulares preconizados nas análises de Steiner, Tweed e Downs por meio de telerradiografias em norma lateral. Essa amostra constou de 30 adultos, sendo 12 do gênero masculino e 11 do gênero feminino, com dentição permanente, sem tratamento ortodôntico prévio, todos com oclusão normal, com exceção dos terceiros molares, e perfil facial harmônico. Através de cada uma das telerradiografias laterais foram obtidos os traçados cefalométricos manuais e computadorizados. Os resultados obtidos foram comparados e tratados estatisticamente. Após o estudo, concluiu-se que houve diferença entre os traçados manuais e computadorizados quanto aos ângulos que envolvem os planos mandibular e oclusal.Palavras-chave: Circunferência Craniana. Radiologia. Ortodontia.
    corecore