315 research outputs found
Active experiments using rocket-borne shaped charge barium releases
A reliable payload system and scaled down shaped charges were developed for carrying out experiments in solar-terrestrial magnetospheric physics. Four Nike-Tomahawk flights with apogees near 450 km were conducted to investigate magnetospheric electric fields, and two Taurus-Tomahawk rockets were flown in experiments on the auroral acceleration process in discrete auroras. In addition, a radial shaped charge was designed for plasma perturbation experiments
AMPS definition study on Optical Band Imager and Photometer System (OBIPS)
A study was conducted to define the characteristics of a modular optical diagnostic system (OBIPS) for AMPS, to provide input to Phase B studies, and to give information useful for experiment planning and design of other instrumentation. The system described consists of visual and UV-band imagers and visual and UV-band photometers; of these the imagers are most important because of their ability to measure intensity as a function of two spatial dimensions and time with high resolution. The various subsystems of OBIPS are in themselves modular with modules having a high degree of interchangeability for versatility, economy, and redundancy
All-optical combiner-splitter and gating devices based on straight waveguides
A two-mode optical combiner-splitter device is designed based on all straight waveguides that maintains the integrity of the two modes during propagation and allows for an analytic analysis. The design analysis has the potential to improve the precision of the device fabrication. The design is used in an analytic optical gate based on a nonlinear Mach-Zehnder interferometer. The design reduces the size of a previously proposed device and simplifies its analysis
Recommended from our members
Conductivity of carbon nanotube polymer composites
Dissipative Particle Dynamics (DPD) simulations were used to investigate methods of controlling the assembly of percolating networks of carbon nanotubes (CNTs) in thin films of block copolymer melts. For suitably chosen polymers the CNTs were found to spontaneously self-assemble into topologically interesting patterns. The mesoscale morphology was projected onto a finite-element grid and the electrical conductivity of the films computed. The conductivity displayed non-monotonic behavior as a function of relative polymer fractions in the melt. Results are compared and contrasted with CNT dispersion in small-molecule fluids and mixtures
Extension of the fuzzy integral for general fuzzy set-valued information
The fuzzy integral (FI) is an extremely flexible aggregation operator. It is used in numerous applications, such as image processing, multicriteria decision making, skeletal age-at-death estimation, and multisource (e.g., feature, algorithm, sensor, and confidence) fusion. To date, a few works have appeared on the topic of generalizing Sugeno's original real-valued integrand and fuzzy measure (FM) for the case of higher order uncertain information (both integrand and measure). For the most part, these extensions are motivated by, and are consistent with, Zadeh's extension principle (EP). Namely, existing extensions focus on fuzzy number (FN), i.e., convex and normal fuzzy set- (FS) valued integrands. Herein, we put forth a new definition, called the generalized FI (gFI), and efficient algorithm for calculation for FS-valued integrands. In addition, we compare the gFI, numerically and theoretically, with our non-EP-based FI extension called the nondirect FI (NDFI). Examples are investigated in the areas of skeletal age-at-death estimation in forensic anthropology and multisource fusion. These applications help demonstrate the need and benefit of the proposed work. In particular, we show there is not one supreme technique. Instead, multiple extensions are of benefit in different contexts and applications
Maine Direct Service Workforce Survey Results 2012 [Chartbook]
Direct service workers play a central role in the quality of the long-term services and supports provided to older people and people with disabilities in home and community settings. Nationally, and at the state level, there is a critical need for more information about this workforce in order to inform workforce policy and measure improvements in workforce quality and stability over time. Maine was one of seven states to administer baseline surveys under a grant funded by the U.S. Centers for Medicare and Medicaid Service. Survey questions focused on workforce volume, stability, and compensation, as well as, cultural competence, workforce challenges, workforce training and worker qualifications.
This Chartbook provides the results of two direct service workforce surveys conducted in the summer of 2012: one for Personal Attendants who work for adults with disabilities and families in participant-directed programs; and the second for Provider Organizations serving adults with intellectual disabilities and older adults with disabilities
First E region observations of mesoscale neutral wind interaction with auroral arcs
We report the first observations of E region neutral wind fields and their interaction with auroral arcs at mesoscale spatial resolution during geomagnetically quiet conditions at Mawson, Antarctica. This was achieved by using a scanning Doppler imager, which can observe thermospheric neutral line-of-sight winds and temperatures simultaneously over a wide field of view. In two cases, the background E region wind field was perpendicular to an auroral arc, which when it appeared caused the wind direction within âŒ50 km of the arc to rotate parallel along the arc, reverting to the background flow direction when the arc disappeared. This was observed under both westward and eastward plasma convection. The wind rotations occurred within 7â16 min. In one case, as an auroral arc propagated from the horizon toward the local zenith, the background E region wind field became significantly weaker but remained unaffected where the arc had not passed through. We demonstrate through modeling that these effects cannot be explained by height changes in the emission layer. The most likely explanation seems to be the greatly enhanced ion drag associated with the increased plasma density and localized ionospheric electric field associated with auroral arcs. In all cases, the F region neutral wind appeared less affected by the auroral arc, although its presence is clear in the data
Investigation of initiation of gigantic jets connecting thunderclouds to the ionosphere
The initiation of giant electrical discharges called as "gigantic jets"
connecting thunderclouds to the ionosphere is investigated by numerical
simulation method in this paper. Using similarity relations, the triggering
conditions of streamer formation in laboratory situations are extended to form
a criterion of initiation of gigantic jets. The energy source causing a
gigantic jet is considered due to the quasi-electrostatic field generated by
thunderclouds. The electron dynamics from ionization threshold to streamer
initiation are simulated by the Monte Carlo technique. It is found that
gigantic jets are initiated at a height of ~18-24 km. This is in agreement with
the observations. The method presented in this paper could be also applied to
the analysis of the initiation of other discharges such as blue jets and red
sprites.Comment: 12th International Congress on Plasma Physics, 25-29 October 2004,
Nice (France
Belle II Technical Design Report
The Belle detector at the KEKB electron-positron collider has collected
almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an
upgrade of KEKB is under construction, to increase the luminosity by two orders
of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2
/s luminosity. To exploit the increased luminosity, an upgrade of the Belle
detector has been proposed. A new international collaboration Belle-II, is
being formed. The Technical Design Report presents physics motivation, basic
methods of the accelerator upgrade, as well as key improvements of the
detector.Comment: Edited by: Z. Dole\v{z}al and S. Un
MiL Testing of Highly Configurable Continuous Controllers: Scalable Search Using Surrogate Models
Continuous controllers have been widely used in automotive do- main to monitor and control physical components. These con- trollers are subject to three rounds of testing: Model-in-the-Loop (MiL), Software-in-the-Loop and Hardware-in-the-Loop. In our earlier work, we used meta-heuristic search to automate MiL test- ing of fixed configurations of continuous controllers. In this paper, we extend our work to support MiL testing of all feasible configura- tions of continuous controllers. Specifically, we use a combination of dimensionality reduction and surrogate modeling techniques to scale our earlier MiL testing approach to large, multi-dimensional input spaces formed by configuration parameters. We evaluated our approach by applying it to a complex, industrial continuous controller. Our experiment shows that our approach identifies test cases indicating requirements violations. Further, we demonstrate that dimensionally reduction helps generate surrogate models with higher prediction accuracy. Finally, we show that combining our search algorithm with surrogate modelling improves its efficiency for two out of three requirements
- âŠ