Closed-loop magnetic separation of nanoparticles on a packed bed of spheres

In this work, we consider magnetic separation of iron oxide nanoparticles when a nanoparticle suspension (diluted ferrofluid) passes through a closed-loop filter composed of a packed bed of micro-beads magnetized by an externally applied magnetic field. We show that the capture of nanoparticles of a size as small as 60 nm is easily achieved at low-to-moderate magnetic fields (16-32 kA/m) thanks to relatively strong magnetic interactions between them. The key parameter governing the capture process is the Mason number - the ratio of hydrodynamic-to-magnetic forces exerted to nanoparticles. The filter efficiency, Λ, defined through the ratio of the inlet-to-outlet concentration shows a power-law dependency on Mason number, Λ∞Ma-0.83, in the range of 102<Ma<104. The proposed theoretical model allows a correct prediction of the Mason number dependency of the filter efficiency. The obtained results could be of potential interest for water purification systems based on chemical adsorption of micro-pollutants on magnetic nanoparticles, followed by magnetic separation of the nanoparticles. © 2015 AIP Publishing LLC

Simulations of extensional flow in microrheometric devices

We present a detailed numerical study of the flow of a Newtonian fluid through microrheometric devices featuring a sudden contraction–expansion. This flow configuration is typically used to generate extensional deformations and high strain rates. The excess pressure drop resulting from the converging and diverging flow is an important dynamic measure to quantify if the device is intended to be used as a microfluidic extensional rheometer. To explore this idea, we examine the effect of the contraction length, aspect ratio and Reynolds number on the flow kinematics and resulting pressure field. Analysis of the computed velocity and pressure fields show that, for typical experimental conditions used in microfluidic devices, the steady flow is highly three-dimensional with open spiraling vortical structures in the stagnant corner regions. The numerical simulations of the local kinematics and global pressure drop are in good agreement with experimental results. The device aspect ratio is shown to have a strong impact on the flow and consequently on the excess pressure drop, which is quantified in terms of the dimensionless Couette and Bagley correction factors. We suggest an approach for calculating the Bagley correction which may be especially appropriate for planar microchannels

Influence of Shear-Thinning Rheology on the Mixing Dynamics in Taylor-Couette Flow

Non‐Newtonian rheology can have a significant effect on mixing efficiency, which remains poorly understood. The effect of shear‐thinning rheology in a Taylor‐Couette reactor is studied using a combination of particle image velocimetry and flow visualization. Shear‐thinning is found to alter the critical Reynolds numbers for the formation of Taylor vortices and the higher‐order wavy instability, and is associated with an increase in the axial wavelength. Strong shear‐thinning and weak viscoelasticity can also lead to sudden transitions in wavelength as the Reynolds number is varied. Finally, it is shown that shear‐thinning causes an increase in the mixing time within vortices, due to a reduction in their circulation, but enhances the axial dispersion of fluid in the reactor

Multifunctional light beam control device by stimuli-responsive liquid crystal micro-grating structures

There is an increasing need to control light phase with tailored precision via simple means in both fundamental science and industry. One of the best candidates to achieve this goal are electro-optical materials. In this work, a novel technique to modulate the spatial phase profile of a propagating light beam by means of liquid crystals (LC), electro-optically addressed by indium-tin oxide (ITO) grating microstructures, is proposed and experimentally demonstrated. A planar LC cell is assembled between two perpendicularly placed ITO gratings based on microstructured electrodes. By properly selecting only four voltage sources, we modulate the LC-induced phase profile such that non-diffractive Bessel beams, laser stretching, beam steering, and 2D tunable diffraction gratings are generated. In such a way, the proposed LC-tunable component performs as an all-in-one device with unprecedented characteristics and multiple functionalities. The operation voltages are very low and the aperture is large. Moreover, the device operates with a very simple voltage control scheme and it is lightweight and compact. Apart from the demonstrated functionalities, the proposed technique could open further venues of research in optical phase spatial modulation formats based on electro-optical materials.This work was supported by the Comunidad de Madrid and FEDER Program (S2018/NMT-4326), the Ministerio de Economía y Competitividad of Spain (TEC2016-77242-C3-1-R and TEC2016-76021-C2-2-R), the FEDER/Ministerio de Ciencia, Innovación y Universidades and Agencia Estatal de Investigación (RTC2017-6321-1, PID2019-109072RB-C31 and PID2019-107270RB-C21). The authors also acknowledge the support by the Ministry of National Defense of Poland (GBMON/13-995/2018/WAT), Military University of Technology (Grant no. 23-895)

Repulsive magnetic levitation-based electromagnetic energy harvesting of a low-frequency ocean wave

In this study, an electromagnetic energy harvester for a low-frequency ocean wave was developed in a compact 3D-printed structure. Ocean wave energy conversion technologies exist, but maintaining them in the harsh marine environment is crucial for business. Friction increases maintenance costs. Therefore, magnetic levitation, being friction-free, is used for cost-effective, low-maintenance electromagnetic energy harvesting applications. Low-frequency oscillating energy is captured using repulsive magnetic levitation with a buoy and generating electricity using a permanent magnet and copper coil. A levitating magnet is repelled by a fixed one, inducing electricity as it passes through a coil. Experiments with a 0.1 Hz sine wave mimic the average frequency of ocean waves, showing successful voltage peaks at intervals. The output voltage and measured power from the harvester exhibit variations influenced by multiple parameters. The maximum output voltage observed was 3.4 V and an average of 99 mW of power was calculated. The experiment demonstrates the feasibility of using repulsive magnetic levitation for low-frequency wave energy harvesting and also encompasses various harvester configurations, including transfer magnet forces and top magnets