7,044 research outputs found
Projection filters for modal parameter estimate for flexible structures
Single-mode projection filters are developed for eigensystem parameter estimates from both analytical results and test data. Explicit formulations of these projection filters are derived using the pseudoinverse matrices of the controllability and observability matrices in general use. A global minimum optimization algorithm is developed to update the filter parameters by using interval analysis method. Modal parameters can be attracted and updated in the global sense within a specific region by passing the experimental data through the projection filters. For illustration of this method, a numerical example is shown by using a one-dimensional global optimization algorithm to estimate model frequencies and dampings
Single-Mode Projection Filters for Modal Parameter Identification for Flexible Structures
Single-mode projection filters are developed for eigensystem parameter identification from both analytical results and test data. Explicit formulations of these projection filters are derived using the orthogonal matrices of the controllability and observability matrices in the general sense. A global minimum optimization algorithm is applied to update the filter parameters by using the interval analysis method. The updated modal parameters represent the characteristics of the test data. For illustration of this new approach, a numerical simulation for the MAST beam structure is shown by using a one-dimensional global optimization algorithm to identify modal frequencies and damping. Another numerical simulation of a ten-mode structure is also presented by using a two-dimensional global optimization algorithm to illustrate the feasibility of the new method. The projection filters are practical for parallel processing implementation
Integrated System Identification and Adaptive State Estimation for Control of Flexible Space Structures
Accurate state information is crucial for control of flexible space structures in which the state feedback strategy is used. The performance of a state estimator relies on accurate knowledge about both the system and its disturbances, which are represented by system model and noise covariances respectively. For flexible space structures, due to their great flexibility, obtaining good models from ground testing is not possible. In addition, the characteristics of the systems in operation may vary due to temperature gradient, reorientation, and deterioration of material, etc. Moreover, the disturbances during operation are usually not known. Therefore, adaptive methods for system identification and state estimation are desirable for control of flexible space structures. This dissertation solves the state estimation problem under three situations: having system model and noise covariances, having system model but no noise covariances, having neither system model nor noise covariances. Recursive least-squares techniques, which require no initial knowledge of the system and noises, are used to identify a matrix polynomial model of the system, then a state space model and the corresponding optimal steady state Kalman filter gain are calculated from the coefficients of the identified matrix polynomial model. The derived methods are suitable for on-board adaptive applications. Experimental example is included to validate the derivations
Estimation of Kalman filter gain from output residuals
This paper presents a procedure for estimating the Kalman filter gain from output residuals. The system state space model is assumed to be known, but the process and noise covariance are unknown. The proposed procedure consists of three basic steps. First, the output residuals are computed from the given model and a given set of input-output data. Second, a linear regression model for this part of the response is computed by a least squares solution. Third, the Kalman filter gain is then estimated from the coefficients of this model. Numerical results using experimental data are presented to illustrate the validity of the developed procedure
Frequency domain state-space system identification
An algorithm for identifying state-space models from frequency response data of linear systems is presented. A matrix-fraction description of the transfer function is employed to curve-fit the frequency response data, using the least-squares method. The parameters of the matrix-fraction representation are then used to construct the Markov parameters of the system. Finally, state-space models are obtained through the Eigensystem Realization Algorithm using Markov parameters. The main advantage of this approach is that the curve-fitting and the Markov parameter construction are linear problems which avoid the difficulties of nonlinear optimization of other approaches. Another advantage is that it avoids windowing distortions associated with other frequency domain methods
Consistency check of charged hadron multiplicities and fragmentation functions in SIDIS
We derived the conditions on certain combinations of integrals of the
fragmentation functions of pion using HERMES data of the sum for the charged
pion multiplicities from semi-inclusive deep-inelastic scattering (SIDIS) off
the deuteron target. In our derivation the nucleon parton distribution
functions (PDFs) are assumed to be isospin SU(2) symmetric. Similar conditions
have also been obtained for the fragmentation functions (FFs) of kaon by the
sum of charged kaon multiplicities as well. We have chosen several FFs to study
the impact of those conditions we have derived. Among those FFs, only that
produced in the nonlocal chiral-quark model (NLQM) constantly satisfy the
conditions. Furthermore, the ratios of the strange PDFs and the
nonstrange PDFs extracted from the charged pion and kaon
multiplicities differ from each other significantly. Finally, we demonstrate
that the HERMES pion multiplicity data is unlikely to be compatible with the
two widely-used PDFs, namely CTEQ6M and NNPDF3.0.Comment: 11 pages, 5 fig
- …