22 research outputs found
Micro-Analytical Data of Au Mineralization at Atud Gold Deposit, Eastern Desert, Egypt
Atud gold deposits located at the central part of the Egyptian Eastern Desert of Egypt. It represents the vein-type gold mineralization at the Arabian-Nubian Shield in North Africa. Furthermore, this Au mineralization was closely associated with intense hydrothermal alteration haloes along the NW-SE brittle-ductile shear zone at the mined area. This study reports new data about the mineral chemistry of the hydrothermal and metamorphic minerals as well as the geothermobarometry of the metamorphism and determines the paragenetic interrelationship between Au-bearing sulfides and gangue minerals in Atud gold mine by using the electron microprobe analyses (EMPA). These analyses revealed that the ore minerals associated with gold mineralization are arsenopyrite, pyrite, chalcopyrite, sphalerite, pyrrhotite, tetrahedrite and gersdorffite-cobaltite. Also, the gold is highly associated with arsenopyrite and As-bearing pyrite as well as sphalerite with an average ~70 wt.% Au (+26 wt.% Ag) whereas it occurred either as disseminated grains or along microfractures of arsenopyrite and pyrite in altered wallrocks and mineralized quartz veins. Arsenopyrite occurs as individual rhombic or prismatic zoned grains disseminated in the quartz veins and wallrock and is intergrown with euhedral arsenian pyrite (with ~2 atom % As). Pyrite is As-bearing pyrite that occurs as disseminated subhedral or anhedral zoned grains replacing by chalcopyrite in some samples. Inclusions of sphalerite and pyrrhotite are common in the large pyrite grains. Secondary minerals such as sericite, calcite, chlorite and albite are disseminated either in altered wallrocks or in quartz veins. Sericite is the main secondary and alteration mineral associated with Au-bearing sulfides and calcite. Electron microprobe data of the sericite show that its muscovite component is high in all analyzed flakes (XMs= an average 0.89) and the phengite content (Mg+Fe a.p.f.u.) varies from 0.10 to 0.55 and from 0.13 to 0.29 in wallrocks and mineralized veins respectively. Carbonate occurs either as thin veinlets or disseminated grains in the mineralized quartz vein and/or the wallrocks. It has higher amount of calcite (CaCO3) and low amount of MgCO3 as well as FeCO3 in the wallrocks relative to the quartz veins. Chlorite flakes are associated with arsenopyrite and their electron probe data revealed that they are generally Fe-rich composition (FeOt 20.64–20.10 wt.%) and their composition is clinochlore either pycnochlorite or ripidolite with Al (iv) = 2.30-2.36 pfu and 2.41-2.51 pfu and with narrow range of estimated formation temperatures are (289–295°C) and (301-312°C) for pycnochlorite and ripidolite respectively. Albite is accompanied with chlorite with an Ab content is high in all analyzed samples (Ab= 95.08-99.20)
Hydrothermal ore deposits; from the magma chamber to the earth's surface with examples from the Skellefte district and younger depositsSweden
Post-deformation, sulphide-quartz vein hosted gold ore in the footwall alteration zone of the Palaeoproterozoic LÃ¥ngdal VHMS deposit, Skellefte District, northern Sweden
Reflection seismic imaging of the upper crust in the Kristineberg mining area, northern Sweden
The Kristineberg mining area is located in the western part of the Palaeoproterozoic Skellefte Ore District, one of the most important mining districts in Europe. As a part of a 3D geologic modeling project, two new reflection seismic profiles were acquired with a total length of about 20. km. One profile (HR), parallel to previous seismic profiles, was acquired using a 10. m receiver and source interval and crosses the steeply dipping structures of the Kristineberg mine. The other profile (Profile 2) runs perpendicular to all existing profiles in the area. Although the structural geology is complex, the processed seismic data reveal a series of steeply dipping to sub-horizontal reflections, some of which reach the surface and allow correlation with surface geology. Our general interpretation of the seismic images is that the Kristineberg mine and associated mineral horizon are located in the northern part of a series of steeply south dipping structures. Overall, main structures plunge to the west at about 30°-40°. Cross-dip analysis and reflection modeling were carried out to obtain the 3D orientation of the main reflections and to provide insight into the possible contribution of out-of-the-plane reflections. This helped, for example, to obtain the 3D geometry of a deep reflection that was previously interpreted as structural basement to volcanic rocks. The new reflection seismic profiles have improved our understanding of shallow geological structures in the area and in conjunction with recently acquired potential field data, magnetotelluric data and geological observations will help to refine previous 3D geologic modeling interpretations that were aimed at larger scale structures. © 2010 Elsevier B.V
Correlation between distribution and shape of VMS deposits and regional deformation patterns, Skellefte district, northern Sweden
Crustal geometry of the central Skellefte district, northern Sweden - constraints from reflection seismic investigations
The Palaeoproterozoic Skellefte mining district in Sweden is one of the most important mining districts in Europe. As a part of a 4D geologic modeling project, three new sub-parallel reflection seismic profiles, with a total length of about 95. km, were acquired in the central part of the district. Processed seismic data reveal a series of gentle- to steeply- dipping reflections and a series of diffraction packages. The majority of reflections that extend to the surface can be correlated with geological features either observed in the field or interpreted from the aeromagnetic map. A set of south-dipping reflections represent inferred syn-extensional listric extensional faults that were inverted during subsequent crustal-shortening. Cross-cutting north-dipping reflections are correlated to late-compressional break-back faults. Flat-lying reflections in the central parts of the study area could represent lithological contacts within the Skellefte Group, or the contact between Skellefte Group rocks and their unknown basement. Flat-lying reflections occurring further north are inferred to originate from the top of the Jörn intrusive complex or an intrusive contact within it. So far unknown south- and north-dipping faults have been identified in the vicinity of the Maurliden deposit. Based on the seismic results, a preliminary 3D-model has been created in order to visualize the fault pattern and to provide a base for future 3D/4D modeling in the Skellefte district
Micro-Analytical Data of Au Mineralization at Atud Gold Deposit, Eastern Desert, Egypt
Atud gold deposits located at the central part of the Egyptian Eastern Desert of Egypt. It represents the vein-type gold mineralization at the Arabian-Nubian Shield in North Africa. Furthermore, this Au mineralization was closely associated with intense hydrothermal alteration haloes along the NW-SE brittle-ductile shear zone at the mined area. This study reports new data about the mineral chemistry of the hydrothermal and metamorphic minerals as well as the geothermobarometry of the metamorphism and determines the paragenetic interrelationship between Au-bearing sulfides and gangue minerals in Atud gold mine by using the electron microprobe analyses (EMPA). These analyses revealed that the ore minerals associated with gold mineralization are arsenopyrite, pyrite, chalcopyrite, sphalerite, pyrrhotite, tetrahedrite and gersdorffite-cobaltite. Also, the gold is highly associated with arsenopyrite and As-bearing pyrite as well as sphalerite with an average ~70 wt.% Au (+26 wt.% Ag) whereas it occurred either as disseminated grains or along microfractures of arsenopyrite and pyrite in altered wallrocks and mineralized quartz veins. Arsenopyrite occurs as individual rhombic or prismatic zoned grains disseminated in the quartz veins and wallrock and is intergrown with euhedral arsenian pyrite (with ~2 atom % As). Pyrite is As-bearing pyrite that occurs as disseminated subhedral or anhedral zoned grains replacing by chalcopyrite in some samples. Inclusions of sphalerite and pyrrhotite are common in the large pyrite grains. Secondary minerals such as sericite, calcite, chlorite and albite are disseminated either in altered wallrocks or in quartz veins. Sericite is the main secondary and alteration mineral associated with Au-bearing sulfides and calcite. Electron microprobe data of the sericite show that its muscovite component is high in all analyzed flakes (XMs= an average 0.89) and the phengite content (Mg+Fe a.p.f.u.) varies from 0.10 to 0.55 and from 0.13 to 0.29 in wallrocks and mineralized veins respectively. Carbonate occurs either as thin veinlets or disseminated grains in the mineralized quartz vein and/or the wallrocks. It has higher amount of calcite (CaCO3) and low amount of MgCO3 as well as FeCO3 in the wallrocks relative to the quartz veins. Chlorite flakes are associated with arsenopyrite and their electron probe data revealed that they are generally Fe-rich composition (FeOt 20.64–20.10 wt.%) and their composition is clinochlore either pycnochlorite or ripidolite with Al (iv) = 2.30-2.36 pfu and 2.41-2.51 pfu and with narrow range of estimated formation temperatures are (289–295°C) and (301-312°C) for pycnochlorite and ripidolite respectively. Albite is accompanied with chlorite with an Ab content is high in all analyzed samples (Ab= 95.08-99.20)
Towards product-oriented sustainability in the (primary) metal supply sector
Industrial Ecolog
Crustal 3-D geometry of the Kristineberg area (Sweden) with implications on VMS deposits
Structural analysis of the Palaeoproterozoic volcanogenic massive sulfide (VMS) hosting Kristineberg area, Sweden, constrained by existing magnetotelluric (MT) and seismic reflection data, reveals that the complex geometry characterized by non-cylindrical antiformal structures is due to transpression along the termination of a major high-strain zone. Similar orientations of the host rock deformation fabrics and the VMS ore lenses indicate that the present-day geometry of the complex VMS deposits in the Kristineberg area may be attributed to tectonic transposition. The tectonic transposition was dominantly controlled by reverse shearing and related upright to overturned folding, with increasing contribution of strike-slip shearing and sub-horizontal flow towards greater crustal depths. Furthermore, the northerly dip of the previously recognized subsurface crustal reflector within the Kristineberg area is attributed to formation of crustal compartments with opposite polarities within the scale of the whole Skellefte district. The resulting structural framework of the main geological units is visualized in a 3-D model which is available as a 3-D PDF document through the publication website