Static inconsistencies in certain axiomatic higher-order shear deformation theories for beams, plates and shells

AbstractStatic inconsistencies that arise when modelling the flexural behaviour of beams, plates and shells with clamped boundary conditions using a certain class of axiomatic, higher-order shear deformation theory are discussed. The inconsistencies pertain to displacement-based theories that enforce conditions of vanishing shear strain at the top and bottom surfaces a priori. First it is shown that the essential boundary condition of vanishing Kirchhoff rotation perpendicular to an edge (w,x=0 or w,y=0) is physically inaccurate, as the rotation at a clamped edge may in fact be non-zero due to the presence of transverse shear rotation. As a result, the shear force derived from constitutive equations erroneously vanishes at a clamped edge. In effect, this boundary condition overconstrains the structure leading to underpredictions in transverse bending deflection and overpredictions of axial stresses compared to high-fidelity 3D finite element solutions for thick and highly orthotropic plates. Generalised higher-order theories written in the form of a power series, as in Carrera’s Unified Formulation, do not produce this inconsistency. It is shown that the condition of vanishing shear tractions at the top and bottom surfaces need not be applied a priori, as the transverse shear strains inherently vanish if the order of the theory is sufficient to capture all higher-order effects. Finally, the transverse deflection of the generalised higher-order theories is expanded in a power series of a non-dimensional parameter and used to derive a material and geometry dependent shear correction factor that provides more accurate solutions of bending deflection than the classical value of 5/6

Low subsonic dynamic-stability investigation of several planetary-entry configurations in a vertical wind tunnel, part i

Low subsonic dynamic stability data for evaluation of ballistic deceleration vehicle entering Mars atmospher

A laser scanner for 35mm film

The design, construction, and testing of a laser scanning system is described. The scanner was designed to deliver a scanned beam over a 2.54 cm by 2.54 cm or a 5.08 cm by 5.08 cm format. In order to achieve a scan resolution and rate comparable to that of standard television, an acousto-optic deflector was used for one axis of the scan, and a light deflecting galvanometer for deflection along the other axis. The acoustic optic deflector has the capability of random access scan controlled by a digital computer

Solar pumped laser

A solar pumped laser is described in which the lasant is a gas that will photodissociate and lase when subjected to sunrays. Sunrays are collected and directed onto the gas lasant to cause it to lase. Applications to laser propulsion and laser power transmission are discussed

Sea ice-atmosphere interaction: Application of multispectral satellite data in polar surface energy flux estimates

The application of multi-spectral satellite data to estimate polar surface energy fluxes is addressed. To what accuracy and over which geographic areas large scale energy budgets can be estimated are investigated based upon a combination of available remote sensing and climatological data sets. The general approach was to: (1) formulate parameterization schemes for the appropriate sea ice energy budget terms based upon the remotely sensed and/or in-situ data sets; (2) conduct sensitivity analyses using as input both natural variability (observed data in regional case studies) and theoretical variability based upon energy flux model concepts; (3) assess the applicability of these parameterization schemes to both regional and basin wide energy balance estimates using remote sensing data sets; and (4) assemble multi-spectral, multi-sensor data sets for at least two regions of the Arctic Basin and possibly one region of the Antarctic. The type of data needed for a basin-wide assessment is described and the temporal coverage of these data sets are determined by data availability and need as defined by parameterization scheme. The titles of the subjects are as follows: (1) Heat flux calculations from SSM/I and LANDSAT data in the Bering Sea; (2) Energy flux estimation using passive microwave data; (3) Fetch and stability sensitivity estimates of turbulent heat flux; and (4) Surface temperature algorithm

Experiments on thinning grapes with alpha-naphthaleneacetic acid and dinitro-sec-butylphenol

Zinfandel vines at various stages of flower and fruit dev,elopment were sprayed in the years 1954, 1955, and 1956 with NAA in the range from 0 to 500 ppm. NAA at 5 to 10 ppm applied at bloom stage or 10 ppm NAA applied at fruit-set stage resulted in suitable loosening of clusters.In order to destroy the second-crop clusters, Zinfandel and Muscat of Alexandria vines were sprayed with NAA in a range from 0 to 300 ppm. Spraying was done when the second crop was in full-bloom or fruit-set stage, and the berries on primary clusters were larger and less susceptible to injury. NAA at 25 to 50 ppm sharply reduced the secondary crop without injury to the primary crop.DN-289 (dinitro-sec-butylphenol) in a range from 0.001 % to 0.3% was applied to Muscat of Alexandria vines at bloom and Zinfandel vines at fruit-set stage to determine its value in flower cluster and cluster thinning. DN-289 at 0.05% killed 95% of the clusters in both varieties; in Muscat only 3 to 5% of the leaves showed injury

Energy Spectrum Evolution of a Diffuse Field in Elastic Body Caused by Weak Nonlinearity

We study the evolution of diffuse elastodynamic spectral energy density under the influence of weak nonlinearity. It is shown that the rate of change of this quantity is given by a convolution of the linear energy at two frequencies. Quantitative estimates are given for sample aluminum and fused silica blocks of experimental interest.Comment: 9 pages, 3 figures; revised for better presentatio

Planning the Kitchen

Provides a brief discussion of new trends in kitchen planning

A preliminary training guide for utilizing high-altitude, color-infrared photography in compiling soil maps

Instruction for acquiring and analytically processing small-scale color-infrared photography to perform a soil resources inventory over forests of the southern U.S. is provided. Planning the project; acquiring aerial photography, materials, equipment and supplemental data; and preparing the photography for analysis are discussed. The procedures for preparing ancillary and primary component overlays are discussed. The use of correlation charts and dichotomous keys for mountain landforms, water regime, and vegetation is explained

Sea ice - atmosphere interaction: Application of multispectral satellite data in polar surface energy flux estimates

In the past six months, work has continued on energy flux sensitivity studies, ice surface temperature retrievals, corrections to Advanced Very High Resolution Radiometer (AVHRR) thermal infrared data, modelling of cloud fraction retrievals, and radiation climatologies. We tentatively conclude that the SSM/I may not provide accurate enough estimates of ice concentration and type to improve our shorter term energy flux estimates. SSM/I derived parameters may still be applicable in longer term climatological flux characterizations. We hold promise for a system coupling observation to a ice deformation model. Such a model may provide information on ice distribution which can be used in energy flux calculations. Considerable variation was found in modelled energy flux estimates when bulk transfer coefficients are modulated by lead fetch. It is still unclear what the optimum formulation is and this will be the subject of further work. Data sets for ice surface temperature retrievals were assembled and preliminary data analysis was started. Finally, construction of a conceptual framework for further modelling of the Arctic radiation flux climatology was started