A review of the mallet impact test for small scale explosive formulations

Presented at 19th Seminar on New Trends of Energetic Materials (NTREM 2016); 20-22/04/2016, Pardubice Czech RepublicDevelopment of new explosive formulations begins with the generation of only a few milligrams of material which is investigated using a number of small scale tests such as DSC, TGA, response to flame, mallet impact (mallet friction either glancing or direct blow) to determine whether the formulation is safe to scale up to 10 g. The latter of these tests, mallet impact, can be particularly subjective as the result is directly influenced by the operator carrying out the assessment. Not only can there be a change from one operator to another but there can also be a change in the force applied during each strike potentially leading to inconsistent results. This study highlights this encountered variation and assesses the load applied by a variety of operators with varying levels of explosive experience. This paper also proposes the use of a small scale laboratory based impact test which would provide improved confidence in the assessment of impact sensitiveness of explosive formulations and assist in justifying whether a formulation can be taken to the next scale. A small scale version of the BAM impact test (EMTAP Test 43) has been devised that allows the comparison of the sensitiveness of small scale formulations relative to RDX (8.7 J, EMTAP Test 43B) whilst also ensuring a reproducible result

Automated Mars surface sample return mission concepts for achievement of essential scientific objectives

Mission concepts were investigated for automated return to Earth of a Mars surface sample adequate for detailed analyses in scientific laboratories. The minimum sample mass sufficient to meet scientific requirements was determined. Types of materials and supporting measurements for essential analyses are reported. A baseline trajectory profile was selected for its low energy requirements and relatively simple implementation, and trajectory profile design data were developed for 1979 and 1981 launch opportunities. Efficient spacecraft systems were conceived by utilizing existing technology where possible. Systems concepts emphasized the 1979 launch opportunity, and the applicability of results to other opportunities was assessed. It was shown that the baseline missions (return through Mars parking orbit) and some comparison missions (return after sample transfer in Mars orbit) can be accomplished by using a single Titan III E/Centaur as the launch vehicle. All missions investigated can be accomplished by use of Space Shuttle/Centaur vehicles

Evaluation of ERBE scanner pointing accuracy based upon a coastline detection algorithm

Measurements from the Earth Radiation Budget Experiment (ERBE) scanning radiometers must be accurately located at the top of the Earth's atmosphere for proper interpretation of derived longwave and shortwave components of the Earth radiation field. The accuracy of the location calculations is affected by the orbit characteristics and attitude control systems of the three spacecraft, ERBS, NOAA-9, and NOAA-10. A technique was developed which makes use of the longwave scanner measurements to detect the thermal gradients at the boundaries of ocean and land masses. By analyzing many such coastline boundaries, estimates of the overall accuracy of the scanner measurement location calculations have been derived for the three satellites. The resulting measurement location errors are found to be smaller than the resolution of the radiometers, and this accuracy is well within the required location knowledge for useful science analysis of the ERBE scanner data

Scattering fidelity in elastodynamics

The recent introduction of the concept of scattering fidelity, causes us to revisit the experiment by Lobkis and Weaver [Phys. Rev. Lett. 90, 254302 (2003)]. There, the ``distortion'' of the coda of an acoustic signal is measured under temperature changes. This quantity is in fact the negative logarithm of scattering fidelity. We re-analyse their experimental data for two samples, and we find good agreement with random matrix predictions for the standard fidelity. Usually, one may expect such an agreement for chaotic systems only. While the first sample, may indeed be assumed chaotic, for the second sample, a perfect cuboid, such an agreement is more surprising. For the first sample, the random matrix analysis yields a perturbation strength compatible with semiclassical predictions. For the cuboid the measured perturbation strength is much larger than expected, but with the fitted values for this strength, the experimental data are well reproduced.Comment: 4 page

Rough rice for fattening cattle, sheep, and hogs

Cover title.Includes bibliographical references

Analysis of Archived Residual Newborn Screening Blood Spots After Whole Genome Amplification

Deidentified newborn screening bloodspot samples (NBS) represent a valuable potential resource for genomic research if impediments to whole exome sequencing of NBS deoxyribonucleic acid (DNA), including the small amount of genomic DNA in NBS material, can be overcome. For instance, genomic analysis of NBS could be used to define allele frequencies of disease-associated variants in local populations, or to conduct prospective or retrospective studies relating genomic variation to disease emergence in pediatric populations over time. In this study, we compared the recovery of variant calls from exome sequences of amplified NBS genomic DNA to variant calls from exome sequencing of non-amplified NBS DNA from the same individuals. Results: Using a standard alignment-based Genome Analysis Toolkit (GATK), we find 62,000-76,000 additional variants in amplified samples. After application of a unique kmer enumeration and variant detection method (RUFUS), only 38,000-47,000 additional variants are observed in amplified gDNA. This result suggests that roughly half of the amplification-introduced variants identified using GATK may be the result of mapping errors and read misalignment. Conclusions: Our results show that it is possible to obtain informative, high-quality data from exome analysis of whole genome amplified NBS with the important caveat that different data generation and analysis methods can affect variant detection accuracy, and the concordance of variant calls in whole-genome amplified and non-amplified exomes.National Institute of Health P01HD067244, NS076465, R01ES021006Nutritional Science

Direct measurement of B(D_s^+ → φX^+)

The absolute inclusive branching fraction of D_s^+→φX^+ has been measured from data collected by the BES detector at a center-of-mass energy of 4.03 GeV, corresponding to an integrated luminosity of 22.3 pb^(-1). At this energy, direct pair production e^+e^-→D_s^+D_s^- has been observed. We have selected D_s candidate events by reconstructing five hadronic decay modes D_s^+→φπ^+, K^(0*)K^+, K^0K^+, f0^(π+) and K^0K^-π^+π^+ and have searched for inclusive φ’s in the recoiling D_s^-. We observed three recoiling φ’s in the 166.4 ± 31.8 D_s candidate events, which leads to the absolute branching fraction B(D_s^+→φX^+)=(17.8(-7.2 -6.3)^(+15.1+0.6)) % and B(D_s-6.3+→φπ-6.3+)=(3.6_(-1.6 -1.3)(^_3.1+0.4) %. [S0556-2821(97)02423-5

A trivial observation on time reversal in random matrix theory

It is commonly thought that a state-dependent quantity, after being averaged over a classical ensemble of random Hamiltonians, will always become independent of the state. We point out that this is in general incorrect: if the ensemble of Hamiltonians is time reversal invariant, and the quantity involves the state in higher than bilinear order, then we show that the quantity is only a constant over the orbits of the invariance group on the Hilbert space. Examples include fidelity and decoherence in appropriate models.Comment: 7 pages 3 figure