216 research outputs found
Microheated substrates for patterning cells and controlling development
Here, we seek to control cellular development by devising a means through which cells can be subjected to a microheated environment in standard culture conditions. Numerous techniques have been devised for controlling cellular function and development via manipulation of surface environmental cues at the micro- and nanoscale. It is well understood that temperature plays a significant role in the rate of cellular activities, migratory behavior (thermotaxis), and in some cases, protein expression. Yet, the effects and possible utilization of micrometer-scale temperature fields in cell cultures have not been explored. Toward this end, two types of thermally isolated microheated substrates were designed and fabricated, one with standard backside etching beneath a dielectric film and another with a combination of surface and bulk micromachining and backside etching. The substrates were characterized with infrared microscopy, finite element modeling, scanning electron microscopy, stylus profilometry, and electrothermal calibrations. Neuron culture studies were conducted on these substrates to 1) examine the feasibility of using a microheated environment to achieve patterned cell growth and 2) selectively accelerate neural development on regions less than 100wide. Results show that attached neurons, grown on microheated regions set at 37, extended processes substantially faster than those incubated at 25on the same substrate. Further, unattached neurons were positioned precisely along the length of the heater filament (operating at 45) using free convection currents. These preliminary findings indicate that microheated substrates may be used to direct cellular development spatially in a practical manner.$hfillhbox[1414]
Recommended from our members
Integrated filtering-antenna with controllable frequency bandwidth
An integrated design of a band-pass filter and a patch antenna is proposed in this paper by using an aperture coupled structure. Traditionally, the microwave filter and antenna are designed separately using 50 Ohm interface and then connected by transmission lines, which lead to a large size and more loss. Here, the antenna and microwave filter are directly integrated without a 50 Ohm interface between them. Compared with the traditional cascade designing, the co-design of filter and antenna has a more compact size, simpler configuration, improved frequency selectivity and higher system efficiency. The frequency bandwidth also can be controlled by adjusting the dimension of the coupling aperture in the ground. The measured results agree very well with the simulations, showing the filtering-antenna has good performance in impedance matching, radiation pattern and antenna gain
Stomach One-Point Cancer: One Case Report and Literature Review
Gastric cancer is one of the most common cancers and one of themost frequent causes of cancer deaths worldwide. Early detection andaccurate preoperative staging of gastric cancer is essential for planning optimal therapy such as endoscopic mucosal resection or gastric resection and offers the best prognosis. With advanced technology in diagnostic instruments and the mass screening, early gastric cancer has been detected easier. One-point cancer of gastric is a special type of early gastric cancer[1]. Diagnosis of one-point cancer of gastric is important for both the immediate treatment and the prognosis. There is still no consensus on the operation extent and postoperative treatment for patients with one-point cancer of gastric. Learned from previous reports[2-5], we know that existed in the superfi cial layer of the gastric mucosa and the superfi cial ulcer is one of the important characteristics of one point cancer of gastric. Herein, we report a case of one point cancer of gastric with the appearance of a deep infi ltrating ulcer. To the best of our knowledge, no such type of one point cancer of gastric has been reported
Strain-facilitated process for the lift-off of a Si layer of less than 20 nm thickness
We report a process for the lift-off of an ultrathin Si layer. By plasma hydrogenation of a molecular-beam-epitaxy-grown heterostructure of SiSb-doped-SiSi, ultrashallow cracking is controlled to occur at the depth of the Sb-doped layer. Prior to hydrogenation, an oxygen plasma treatment is used to induce the formation of a thin oxide layer on the surface of the heterostructure. Chemical etching of the surface oxide layer after hydrogenation further thins the thickness of the separated Si layer to be only 15 nm. Mechanisms of hydrogen trapping and strain-facilitated cracking are discussed
The energy spectrum of all-particle cosmic rays around the knee region observed with the Tibet-III air-shower array
We have already reported the first result on the all-particle spectrum around
the knee region based on data from 2000 November to 2001 October observed by
the Tibet-III air-shower array. In this paper, we present an updated result
using data set collected in the period from 2000 November through 2004 October
in a wide range over 3 decades between eV and eV, in which
the position of the knee is clearly seen at around 4 PeV. The spectral index is
-2.68 0.02(stat.) below 1PeV, while it is -3.12 0.01(stat.) above 4
PeV in the case of QGSJET+HD model, and various systematic errors are under
study now.Comment: 12 pages, 7 figures, accepted by Advances in space researc
Moon Shadow by Cosmic Rays under the Influence of Geomagnetic Field and Search for Antiprotons at Multi-TeV Energies
We have observed the shadowing of galactic cosmic ray flux in the direction
of the moon, the so-called moon shadow, using the Tibet-III air shower array
operating at Yangbajing (4300 m a.s.l.) in Tibet since 1999. Almost all cosmic
rays are positively charged; for that reason, they are bent by the geomagnetic
field, thereby shifting the moon shadow westward. The cosmic rays will also
produce an additional shadow in the eastward direction of the moon if cosmic
rays contain negatively charged particles, such as antiprotons, with some
fraction. We selected 1.5 x10^{10} air shower events with energy beyond about 3
TeV from the dataset observed by the Tibet-III air shower array and detected
the moon shadow at level. The center of the moon was detected
in the direction away from the apparent center of the moon by 0.23 to
the west. Based on these data and a full Monte Carlo simulation, we searched
for the existence of the shadow produced by antiprotons at the multi-TeV energy
region. No evidence of the existence of antiprotons was found in this energy
region. We obtained the 90% confidence level upper limit of the flux ratio of
antiprotons to protons as 7% at multi-TeV energies.Comment: 13pages,4figures; Accepted for publication in Astroparticle Physic
Anomalous Heat Conduction and Anomalous Diffusion in Low Dimensional Nanoscale Systems
Thermal transport is an important energy transfer process in nature. Phonon
is the major energy carrier for heat in semiconductor and dielectric materials.
In analogy to Ohm's law for electrical conductivity, Fourier's law is a
fundamental rule of heat transfer in solids. It states that the thermal
conductivity is independent of sample scale and geometry. Although Fourier's
law has received great success in describing macroscopic thermal transport in
the past two hundreds years, its validity in low dimensional systems is still
an open question. Here we give a brief review of the recent developments in
experimental, theoretical and numerical studies of heat transport in low
dimensional systems, include lattice models, nanowires, nanotubes and
graphenes. We will demonstrate that the phonon transports in low dimensional
systems super-diffusively, which leads to a size dependent thermal
conductivity. In other words, Fourier's law is breakdown in low dimensional
structures
- …