Failure impact analysis of isolation valves in a water distribution

This is the author accepted manuscript. The final version is available from American Society of Civil Engineers via the DOI in this record.Isolation valves are crucial components of water distribution systems for separating pipe segments from the network for repair or maintenance purpose. This paper looks at the impacts of isolation valves failure on the three indictors including number of valves that are needed to isolate a distribution system segment, the size of distribution system segments and the shortfall in meeting demands during failure. A network with various isolation valve configurations in terms of the density of valves is used as a case study. The results obtained from the case study show that the failure of an isolation valve has substantially varying impacts on system performance during a shutdown. The density of valves in the network determines impacts of inoperable valves on a shutdown. Generally speaking, a higher density of isolation valves leads to the less impact of valve failure. Finally, several conclusions drawn from the critical valve analysis in this study could be applied to guide the isolation valve maintenance and management.Bentley Systems provided the software to conduct the hydraulic simulation and valve segmentation. This study is financially supported by the National Natural Science Foundation of China (51320105010, 51579027), the National Science and Technology Major Project (2014ZX03005001), and Ministry of Water Resource of China (Grant No.201401014-2), which are greatly acknowledged

Pressure-driven Demand and Leakage Simulation for Water Distribution Networks

Copyright © 2008 American Society of Civil EngineersIncreasingly, water loss via leakage is acknowledged as one of the main challenges facing water distribution system operations. The consideration of water loss over time, as systems age, physical networks grow, and consumption patterns mature, should form an integral part of effective asset management, rendering any simulation model capable of quantifying pressure-driven leakage indispensable. To this end, a novel steady-state network simulation model that fully integrates into a classical hydraulic representation, pressure-driven demand and leakage at the pipe level is developed and presented here. After presenting a brief literature review about leakage modeling, the importance of a more realistic simulation model allowing for leakage analysis is demonstrated. The algorithm is then tested from a numerical standpoint and subjected to a convergence analysis. These analyses are performed on a case study involving two networks derived from real systems. Experimentally observed convergence/error statistics demonstrate the high robustness of the proposed pressure-driven demand and leakage simulation model

Evaluating the approximation of the affinity laws and improving the efficiency estimate for variable speed pumps

Affinity laws relate to the characteristics of pumps operating at different speeds, and in a water distribution context, are usually used to predict the pump curve of variable speed pumps (VSPs). VSPs can adjust the pump curve to meet the network requirements more efficiently with resultant savings of energy. The estimation of the effectiveness of a VSP is based on hydraulic simulations, in which the behavior of VSPs is described using the affinity laws. The affinity laws, however, contain approximations because they do not take into account factors that do not scale with velocity. In particular, the approximation inherent in the affinity law that computes power and efficiency can produce a misleading result, especially for small-size pumps. The research reported in this paper estimates the error in efficiency for a wide range of pump sizes and tests the use of a previously proposed formula as an alternative to the affinity law. Results show that a better estimation can be achieved for the efficiency of small- and medium-size pumps. Moreover the formula can be easily implemented in hydraulic solvers. © 2013 American Society of Civil Engineers.Angus R. Simpson and Angela March

Pressure-dependent EPANET extension

In water distribution systems (WDSs), the available flow at a demand node is dependent on the pressure at that node. When a network is lacking in pressure, not all consumer demands will be met in full. In this context, the assumption that all demands are fully satisfied regardless of the pressure in the system becomes unreasonable and represents the main limitation of the conventional demand driven analysis (DDA) approach to WDS modelling. A realistic depiction of the network performance can only be attained by considering demands to be pressure dependent. This paper presents an extension of the renowned DDA based hydraulic simulator EPANET 2 to incorporate pressure-dependent demands. This extension is termed “EPANET-PDX” (pressure-dependent extension) herein. The utilization of a continuous nodal pressure-flow function coupled with a line search and backtracking procedure greatly enhance the algorithm’s convergence rate and robustness. Simulations of real life networks consisting of multiple sources, pipes, valves and pumps were successfully executed and results are presented herein. Excellent modelling performance was achieved for analysing both normal and pressure deficient conditions of the WDSs. Detailed computational efficiency results of EPANET-PDX with reference to EPANET 2 are included as well

Informational entropy : a failure tolerance and reliability surrogate for water distribution networks

Evolutionary algorithms are used widely in optimization studies on water distribution networks. The optimization algorithms use simulation models that analyse the networks under various operating conditions. The solution process typically involves cost minimization along with reliability constraints that ensure reasonably satisfactory performance under abnormal operating conditions also. Flow entropy has been employed previously as a surrogate reliability measure. While a body of work exists for a single operating condition under steady state conditions, the effectiveness of flow entropy for systems with multiple operating conditions has received very little attention. This paper describes a multi-objective genetic algorithm that maximizes the flow entropy under multiple operating conditions for any given network. The new methodology proposed is consistent with the maximum entropy formalism that requires active consideration of all the relevant information. Furthermore, an alternative but equivalent flow entropy model that emphasizes the relative uniformity of the nodal demands is described. The flow entropy of water distribution networks under multiple operating conditions is discussed with reference to the joint entropy of multiple probability spaces, which provides the theoretical foundation for the optimization methodology proposed. Besides the rationale, results are included that show that the most robust or failure-tolerant solutions are achieved by maximizing the sum of the entropies

The Battle of the Water Networks II (BWN-II)

The Battle of the Water Networks II (BWN-II) is the latest of a series of competitions related to the design and operation of water distribution systems (WDSs) undertaken within the Water Distribution Systems Analysis (WDSA) Symposium series. The BWN-II problem specification involved a broadly defined design and operation problem for an existing network that has to be upgraded for increased future demands, and the addition of a new development area. The design decisions involved addition of new and parallel pipes, storage, operational controls for pumps and valves, and sizing of backup power supply. Design criteria involved hydraulic, water quality, reliability, and environmental performance measures. Fourteen teams participated in the Battle and presented their results at the 14th Water Distribution Systems Analysis (WDSA 2012) conference in Adelaide, Australia, September 2012. This paper summarizes the approaches used by the participants and the results they obtained. Given the complexity of the BWN-II problem and the innovative methods required to deal with the multi-objective, high dimensional and computationally demanding nature of the problem, this paper represents a snap-shot of state of the art methods for the design and operation of water distribution systems. A general finding of this paper is that there is benefit in using a combination of heuristic engineering experience and sophisticated optimization algorithms when tackling complex real-world water distribution system design problems.Angela Marchi...Angus R. Simpson, Aaron C. Zecchin, Holger R. Maier...Christopher Stokes, Wenyan Wu, Graeme C. Dandy...et al

The Battle of the Water Networks II (BWN-II)

The Battle of the Water Networks II (BWN-II) is the latest of a series of competitions related to the design and operation of water distribution systems (WDSs) undertaken within the Water Distribution Systems Analysis (WDSA) Symposium series. The BWN-II problem specification involved a broadly defined design and operation problem for an existing network that has to be upgraded for increased future demands, and the addition of a new development area. The design decisions involved addition of new and parallel pipes, storage, operational controls for pumps and valves, and sizing of backup power supply. Design criteria involved hydraulic, water quality, reliability, and environmental performance measures. Fourteen teams participated in the Battle and presented their results at the 14th Water Distribution Systems Analysis (WDSA 2012) conference in Adelaide, Australia, September 2012. This paper summarizes the approaches used by the participants and the results they obtained. Given the complexity of the BWN-II problem and the innovative methods required to deal with the multi-objective, high dimensional and computationally demanding nature of the problem, this paper represents a snap-shot of state of the art methods for the design and operation of water distribution systems. A general finding of this paper is that there is benefit in using a combination of heuristic engineering experience and sophisticated optimization algorithms when tackling complex real-world water distribution system design problems.Angela Marchi...Angus R. Simpson, Aaron C. Zecchin, Holger R. Maier...Christopher Stokes, Wenyan Wu, Graeme C. Dandy...et al