Impact of salinity and temperature variations on relative permeability and residual oil saturation in neutral-wet sandstone

Low-salinity water flooding has become one of the major emerging enhanced oil recovery techniques where lower salinity water is flooded into a hydrocarbon reservoir in order to increase oil recovery. It’s been widely reported that reservoir wettability alteration from oil-wet to water-wet in a low-salinity water process improves oil recovery. Many factors control system wettability, however, role and intensity of each factor is not completely understood. Therefore, several reported affecting factors on wettability alteration were eliminated in the present work in order to determine the impact of different low-salinity water on oil and water relative permeability curves and residual oil saturation. A series of experiments were performed where three simulated brine solutions were injected into oil saturated thoroughly cleaned neutral-wet sandstone core plugs. The effect of injected brine temperature on oil and water relative permeability curves and residual oil saturation was also determined by injecting 115,000 ppm salinity brine at three different temperatures. Results indicate that decreasing flooded water salinity alters the wettability preference of the rock towards favorable water-wetting conditions. Water-wet conditions decrease water mobility and enhance oil mobilization leading to better oil microscopic displacement efficiency and reduced residual oil saturation. Elevated temperature reduces water relative permeability and residual oil saturation.Cited as:Mahmud, W. M. Impact of salinity and temperature variations on relative permeability and residual oil saturation in neutral-wet sandstone. Capillarity, 2022, 5(2): 23-31. https://doi.org/10.46690/capi.2022.02.0

Numerical investigation of optimum ions concentration in low salinity waterflooding

     Injecting low saline water is one of the practices used to improve hydrocarbon production that has recently significantly grown due to its advantages over seawater and chemical flooding. Although many theories and mechanisms have been provided on how additional oil recovery has been achieved utilizing low salinity waterflooding, the principle fundamentals of the mechanism(s) are still ambiguous. This article investigates the potential use of low salinity waterflooding (LSWF) to improve oil production from a sandstone formation. A 3D field-scale model was developed using Computer Modeling Group ( generalized equation-of-state model simulator) based on a mature oil field data. The developed model was validated against actual field data where only 8% deviation was observed. Simulation analysis indicated that multi-component ion exchange is a key factor to improve oil production because it alters rock wettability from oil-wet to water-wet. Simulation sensitivity studies showed that low salinity water flooding provided higher oil production than high water salinity flooding. Moreover, simulation showed early breakthrough time of low salinity water injection can provide high oil recovery up to 71%. Therefore, implementing LSWF instantly after first stage production provides recovery gains up to 75%. The determined optimal injected brine composition concentration for Ca2+, Mg2+ and Na+ are 450, 221, and 60 ppm, respectively. During LSWF, a high divalent cations and low monovalent cations’ concentration can be recommended for injected brine and formation aquifer for beneficial wettability alteration. Simulation also showed that reservoir temperature influenced the alteration of ion exchange wettability during LSWF as oil recovery increased with temperature. Therefore, high temperature sandstone reservoirs can be considered as a good candidate for LSWF.Cited as: Ben Mahmud, H., Mahmud, W.M., Arumugam, S. Numerical investigation of optimum lons concentration in low salinity waterflooding. Advances in Geo-Energy Research, 2020, 4(3): 271-285, doi: 10.46690/ager.2020.03.0

A Review of Fracturing Technologies Utilized in Shale Gas Resources

The modern hydraulic fracturing technique was implemented in the oil and gas industry in the 1940s. Since then, it has been used extensively as a method of stimulation in unconventional reservoirs in order to enhance hydrocarbon recovery. Advances in directional drilling technology in shale reservoirs allowed hydraulic fracturing to become an extensively common practice worldwide. Fracturing technology can be classified according to the type of the fracturing fluid with respect to the well orientation into vertical, inclined, or horizontal well fracturing. Depth, natural fractures, well completion technology, capacity, and formation sensitivity of a shale reservoir all play a role in the selection of fracturing fluid and fracturing orientation. At present, the most commonly used technologies are multi-section fracturing, hydra-jet fracturing, fracture network fracturing, re-fracturing, simultaneous fracturing, and CO2 and N2 fracturing. This chapter briefly reviews the technologies used in shale reservoir fracturing

Impact of opioid-free analgesia on pain severity and patient satisfaction after discharge from surgery: multispecialty, prospective cohort study in 25 countries

Background: Balancing opioid stewardship and the need for adequate analgesia following discharge after surgery is challenging. This study aimed to compare the outcomes for patients discharged with opioid versus opioid-free analgesia after common surgical procedures.Methods: This international, multicentre, prospective cohort study collected data from patients undergoing common acute and elective general surgical, urological, gynaecological, and orthopaedic procedures. The primary outcomes were patient-reported time in severe pain measured on a numerical analogue scale from 0 to 100% and patient-reported satisfaction with pain relief during the first week following discharge. Data were collected by in-hospital chart review and patient telephone interview 1 week after discharge.Results: The study recruited 4273 patients from 144 centres in 25 countries; 1311 patients (30.7%) were prescribed opioid analgesia at discharge. Patients reported being in severe pain for 10 (i.q.r. 1-30)% of the first week after discharge and rated satisfaction with analgesia as 90 (i.q.r. 80-100) of 100. After adjustment for confounders, opioid analgesia on discharge was independently associated with increased pain severity (risk ratio 1.52, 95% c.i. 1.31 to 1.76; P < 0.001) and re-presentation to healthcare providers owing to side-effects of medication (OR 2.38, 95% c.i. 1.36 to 4.17; P = 0.004), but not with satisfaction with analgesia (beta coefficient 0.92, 95% c.i. -1.52 to 3.36; P = 0.468) compared with opioid-free analgesia. Although opioid prescribing varied greatly between high-income and low- and middle-income countries, patient-reported outcomes did not.Conclusion: Opioid analgesia prescription on surgical discharge is associated with a higher risk of re-presentation owing to side-effects of medication and increased patient-reported pain, but not with changes in patient-reported satisfaction. Opioid-free discharge analgesia should be adopted routinely

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Rate-Controlled Mercury Injection Experiments to Characterize Pore Space Geometry of Berea Sandstone

Interpretation of the relationship between heterogeneity and the flow in porous media is very important in increasing the recovery factor for an oil or gas reservoir. Capillarity for instance, controls fluids static distribution in a reservoir prior to production and remaining hydrocarbons after production commences. Therefore, capillary pressure data are used by petroleum engineers, geologists, and petrophysicists to evaluate production characteristics of petroleum accumulations. Conventional pressure-controlled mercury porosimetry produces an overall capillary pressure curve and pore throat size distribution data that provide little information about the porous medium structure and pore geometry. The present study provides information on three capillary pressure curves obtained from rate-controlled mercury injection porosimetry; one describes the larger pore spaces or pore bodies of a rock, another describes the smaller pores or pore throats that connect the larger pores, and a final curve which corresponds to the overall capillary pressure curve obtained from the conventional pressure-controlled mercury injection. An experimental constant-rate mercury injection apparatus was constructed that consists of a piston displacement pump, a computer controlled stepper motor drive and a core sample cell designed to minimize dead volume. The apparatus was placed in a glass chamber and subjected to an air bath to maintain a constant temperature of 27o C throughout the experiments. Then constant rate mercury injection experiments were performed on three Berea Sandstone core plugs. Results show that volume-controlled or rate-controlled porosimetry provides considerably more detailed data and information on heterogeneity and the statistical nature of pore space structure than the conventional pressure-controlled porosimetry as pressure fluctuations with time reveal menisci locations in pore bodies and pore throats. Moreover, pore size distributions based on volume-accessed pores and pore radii were obtained from the pressure versus saturation relationship

Case Study of Petrophysical Evaluation Utilizing Well Logs Data with Optimization of Reservoir Cut-off Parameters

Petrophysical evaluation of well log data is essential for the exploration and evaluation of hydrocarbon-bearing formations. Moreover, there are no standard criteria to implement cut-offs on petrophysical properties as a direction for economic decisions. In the present work, a petrophysical evaluation of well logging data from four wells in a mature oil field is performed to identify formation quality as a potential for hosting mature hydrocarbons reservoirs. Full consideration of cut-off values was taken into account. The cut-offs were estimated from well-recognized petrophysical relationships for permeability as a function of porosity, water saturation, and shale content. Results verification and calibration were also made based on laboratory measurements of petrophysical properties obtained from available core plugs in order to minimize uncertainty. Lithology analysis and characteristics revealed that the target formation is mainly sand and shale sequences. Results from well logs were in agreement with results obtained from core data. Formation effective porosity varies from 16 to 26% in all wells. A wide range of variations is observed in water saturation ranging from 28 to 57% and permeability ranging from 20 to 3300 mD. This is in good agreement with other measurements and well log analysis that show the mature formation remains to be a good hydrocarbon reservoir with significant potential