1,834 research outputs found
Acute and chronic exercise in patients with HFrEF: Evidence of structural and functional plasticity and intact angiogenic signaling in skeletal muscle
This study examined the response to acute submaximal exercise and the effect of training in patients with heart failure with reduced ejection fraction (HFrEF). The acute angiogenic response to submaximal exercise in HFrEF after small muscle mass training is debated. The direct Fick method, with vascular pressures, was performed across the leg during knee-extensor exercise (KE) at 50% of maximum work rate (WRmax) in patients (n = 6) and controls (n = 6) and then after KE training in patients. Muscle biopsies facilitated the assessment of skeletal muscle structure and vascular endothelial growth factor (VEGF) mRNA levels. Prior to training, HFrEF exhibited significantly higher leg vascular resistance (LVR) (approximate to 15%) and significantly greater noradrenaline spillover (approximate to 385%). Apart from mitochondrial volume density, which was significantly lower (approximate to 22%) in HFrEF, initial skeletal muscle structure, including capillarity, was not different between groups. Resting VEGF mRNA levels, and the increase with exercise, was not different between patients and controls. Following training, LVR was no longer elevated and noradrenaline spillover was curtailed. Skeletal muscle capillarity increased with training, as assessed by capillary-to-fibre ratio (approximate to 13%) and number of capillaries around a fibre (N-CAF) (approximate to 19%). VEGF mRNA was now not significantly increased by acute exercise. Muscle fibre cross-sectional area and percentage area of type I fibres both increased significantly with training (approximate to 18% and approximate to 21%, respectively), while the percentage area of type II fibres fell significantly (approximate to 11%), and mitochondrial volume density now exceeded that of controls. These data reveal structural and functional plasticity and appropriate angiogenic signalling in skeletal muscle of HFrEF patients
Sintering characteristics of nanocrystalline TiO2âA study combining small angle neutron scattering and nitrogen absorption-BET
Small angle neutron scattering (SANS) was employed to characterize the pore structure of nanophase TiO2 ceramic materials compacted at different temperatures. Nanophase samples, produced by inert gas condensation, were compacted at 25, 290, 413, and 550 °C using a pressure of 1 GPa. The pore size distribution of the sample compacted at room temperature was very broad, with sizes ranging from 3-30 nm and pores comprising 38% of the sample volume. Compaction at 290 and 413 °C reduced the pore volume to 25% and 20%, respectively, by eliminating pores at both the small and large ends of the distribution. Compaction at 550 °C resulted in a pore volume that was less than 8%. Complications in the SANS analysis arising from the scattering from grain boundaries are discussed. The results from SANS are compared with those derived from nitrogen absorption, BET, measurement
The anatomy of the tendon of the Infundibulum revisited
The heart is a muscular organ supported by collagenous tissue. The collagenous
tissue is condensed in certain areas to form a supporting framework, often called the fibrous skeleton. The so-called tendon of the infundibulum
has previously been described as part of this skeleton, but its structure and
incidence remain ill defined. The tendon was initially described as a strip of
fibrous tissue running between the aortic root and the pulmonary trunk. Since information on its structure is vague, we sought to evaluate its existence in 100 formalin-fixed adult human hearts obtained from subjects ranging in age from 22 to 86 years, in 20 hearts from infants and children aged from 2 months to 6 years at the time of their death and in 10 cattle hearts. We used classical macroscopic anatomical techniques to demonstrate all the possible connections between the sinuses of the aorta and the pulmonary trunk. We then supplemented the macroscopic techniques with serial transverse histological sections taken through the vascular roots, staining the sections with the haematoxylin-eosin, van Gieson, Masson trichrome and orcein staining methods. Fascial bands surrounded by connective tissue were observed in all hearts. In 80 adult hearts and in 16 neonatal hearts we found fascial bands or strips, which connected the aortic and pulmonary roots. Only in two hearts, however, were we able to identify tendon-like structures, and histology revealed that these were formed by tightly packed collagen fibres intermingled with fat, most likely due to advanced age. Thus in those cases where a "tendon" was present it was no more than condensed fascial bands joining together the apposing sinuses of the arterial trunks. In our opinion, therefore, accounts in the literature describing the "tendon of the infundibulum" as a tendinous structure connecting the aortic and pulmonary roots do not accurately represent
this anatomical structure
New Technique of Stereolithography to Local Curing in Thermosensitive Resins Using CO(2) Laser
A theoretical and experimental study of thermosensitive resins used in thermal stereolithography is presented. The process of local curing through the application of infrared radiation, which has proved to be useful in a new technique for the making of prototypes by means of selective heating with C02 laser (10.6um), is studied. The ideal composition of the thermosensitive resins has proved to be 10 parts epoxy, 1.4 part diethylene triamine (the curing agent) and 0.7 part silica powder. A physical theoretical model is applied for control of the parameters which influence the confinement of the curing in the irradiated bulk. A mathematical model is applied too; it was developed through the resolution of the heat conduction equation dependent on time in cylindrical co-ordinates, which enables to determine the behaviour of curing in terms of irradiation conditions
Molecular Dynamics Study of Bamboo-like Carbon Nanotube Nucleation
MD simulations based on an empirical potential energy surface were used to
study the nucleation of bamboo-like carbon nanotubes (BCNTs). The simulations
reveal that inner walls of the bamboo structure start to nucleate at the
junction between the outer nanotube wall and the catalyst particle. In
agreement with experimental results, the simulations show that BCNTs nucleate
at higher dissolved carbon concentrations (i.e., feedstock pressures) than
those where non-bamboolike carbon nanotubes are nucleated
Beautiful Mirrors and Precision Electroweak Data
The Standard Model (SM) with a light Higgs boson provides a very good
description of the precision electroweak observable data coming from the LEP,
SLD and Tevatron experiments. Most of the observables, with the notable
exception of the forward-backward asymmetry of the bottom quark, point towards
a Higgs mass far below its current experimental bound. The disagreement, within
the SM, between the values for the weak mixing angle as obtained from the
measurement of the leptonic and hadronic asymmetries at lepton colliders, may
be taken to indicate new physics contributions to the precision electroweak
observables. In this article we investigate the possibility that the inclusion
of additional bottom-like quarks could help resolve this discrepancy. Two
inequivalent assignments for these new quarks are analysed. The resultant fits
to the electroweak data show a significant improvement when compared to that
obtained in the SM. While in one of the examples analyzed, the exotic quarks
are predicted to be light, with masses below 300 GeV, and the Higgs tends to be
heavy, in the second one the Higgs is predicted to be light, with a mass below
250 GeV, while the quarks tend to be heavy, with masses of about 800 GeV. The
collider signatures associated with the new exotic quarks, as well as the
question of unification of couplings within these models and a possible
cosmological implication of the new physical degrees of freedom at the weak
scale are also discussed.Comment: 21 pages, 4 embedded postscript figures, LaTeX. Two minor corrections
performe
Roto-vibrational spectrum and Wigner crystallization in two-electron parabolic quantum dots
We provide a quantitative determination of the crystallization onset for two
electrons in a parabolic two-dimensional confinement. This system is shown to
be well described by a roto-vibrational model, Wigner crystallization occurring
when the rotational motion gets decoupled from the vibrational one. The Wigner
molecule thus formed is characterized by its moment of inertia and by the
corresponding sequence of rotational excited states. The role of a vertical
magnetic field is also considered. Additional support to the analysis is given
by the Hartree-Fock phase diagram for the ground state and by the random-phase
approximation for the moment of inertia and vibron excitations.Comment: 10 pages, 8 figures, replaced by the published versio
Electron Spin Decoherence in Bulk and Quantum Well Zincblende Semiconductors
A theory for longitudinal (T1) and transverse (T2) electron spin coherence
times in zincblende semiconductor quantum wells is developed based on a
non-perturbative nanostructure model solved in a fourteen-band restricted basis
set. Distinctly different dependences of coherence times on mobility,
quantization energy, and temperature are found from previous calculations.
Quantitative agreement between our calculations and measurements is found for
GaAs/AlGaAs, InGaAs/InP, and GaSb/AlSb quantum wells.Comment: 11 pages, 3 figure
Phase separating binary fluids under oscillatory shear
We apply lattice Boltzmann methods to study the segregation of binary fluid
mixtures under oscillatory shear flow in two dimensions. The algorithm allows
to simulate systems whose dynamics is described by the Navier-Stokes and the
convection-diffusion equations. The interplay between several time scales
produces a rich and complex phenomenology. We investigate the effects of
different oscillation frequencies and viscosities on the morphology of the
phase separating domains. We find that at high frequencies the evolution is
almost isotropic with growth exponents 2/3 and 1/3 in the inertial (low
viscosity) and diffusive (high viscosity) regimes, respectively. When the
period of the applied shear flow becomes of the same order of the relaxation
time of the shear velocity profile, anisotropic effects are clearly
observable. In correspondence with non-linear patterns for the velocity
profiles, we find configurations where lamellar order close to the walls
coexists with isotropic domains in the middle of the system. For particular
values of frequency and viscosity it can also happen that the convective
effects induced by the oscillations cause an interruption or a slowing of the
segregation process, as found in some experiments. Finally, at very low
frequencies, the morphology of domains is characterized by lamellar order
everywhere in the system resembling what happens in the case with steady shear.Comment: 1 table and 12 figures in .gif forma
- âŠ