Cosmic-ray induced background intercomparison with actively shielded HPGe detectors at underground locations

The main background above 3\,MeV for in-beam nuclear astrophysics studies with $\gamma$-ray detectors is caused by cosmic-ray induced secondaries. The two commonly used suppression methods, active and passive shielding, against this kind of background were formerly considered only as alternatives in nuclear astrophysics experiments. In this work the study of the effects of active shielding against cosmic-ray induced events at a medium deep location is performed. Background spectra were recorded with two actively shielded HPGe detectors. The experiment was located at 148\,m below the surface of the Earth in the Reiche Zeche mine in Freiberg, Germany. The results are compared to data with the same detectors at the Earth's surface, and at depths of 45\,m and 1400\,m, respectively.Comment: Minor errors corrected; final versio

Phase space characteristics of fragmenting nuclei described as excited disordered systems

We investigate the thermodynamical content of a cellular model which describes nuclear fragmentation as a process taking place in an excited disordered system. The model which reproduces very well the size distribution of fragments does not show the existence of a first order phase transition.Comment: 14 pages, TeX type, 7 figure

The drive system of the Major Atmospheric Gamma-ray Imaging Cherenkov Telescope

The MAGIC telescope is an imaging atmospheric Cherenkov telescope, designed to observe very high energy gamma-rays while achieving a low energy threshold. One of the key science goals is fast follow-up of the enigmatic and short lived gamma-ray bursts. The drive system for the telescope has to meet two basic demands: (1) During normal observations, the 72-ton telescope has to be positioned accurately, and has to track a given sky position with high precision at a typical rotational speed in the order of one revolution per day. (2) For successfully observing GRB prompt emission and afterglows, it has to be powerful enough to position to an arbitrary point on the sky within a few ten seconds and commence normal tracking immediately thereafter. To meet these requirements, the implementation and realization of the drive system relies strongly on standard industry components to ensure robustness and reliability. In this paper, we describe the mechanical setup, the drive control and the calibration of the pointing, as well as present measurements of the accuracy of the system. We show that the drive system is mechanically able to operate the motors with an accuracy even better than the feedback values from the axes. In the context of future projects, envisaging telescope arrays comprising about 100 individual instruments, the robustness and scalability of the concept is emphasized.Comment: 15 pages, 12 (10) figures, submitted to Astroparticle Physics, a high resolution version of the paper (particularly fig. 1) is available at http://publications.mppmu.mpg.de/2008/MPP-2008-101/FullText.pd

Towards Guidelines for Preventing Critical Requirements Engineering Problems

Context] Problems in Requirements Engineering (RE) can lead to serious consequences during the software development lifecycle. [Goal] The goal of this paper is to propose empirically-based guidelines that can be used by different types of organisations according to their size (small, medium or large) and process model (agile or plan-driven) to help them in preventing such problems. [Method] We analysed data from a survey on RE problems answered by 228 organisations in 10 different countries. [Results] We identified the most critical RE problems, their causes and mitigation actions, organizing this information by clusters of size and process model. Finally, we analysed the causes and mitigation actions of the critical problems of each cluster to get further insights into how to prevent them. [Conclusions] Based on our results, we suggest preliminary guidelines for preventing critical RE problems in response to context characteristics of the companies.Comment: Proceedings of the 42th Euromicro Conference on Software Engineering and Advanced Applications, 201

Axial compressor middle stage secondary flow study

This report describes an experimental investigation of the secondary flow within and aft of an axial compressor model with thick endwall boundary layers. The objective of the study was to obtain detailed aerodynamic and trace gas concentration traverse data aft of a well documented isolated rotor for the ultimate purpose of improving the design phases of compressor development based on an improved physical understanding of secondary flow. It was determined from the flow visualization, aerodynamic, and trace gas concentration results that the relative unloading of the midspan region of the airfoil inhibitied a fullspan separation at high loading preventing the massive radial displacement of the hub corner stall to the tip. Radial distribution of high and low total pressure fluid influenced the magnitude of the spanwise distribution of loss, such that, there was a general decreases in loss near the hub to the extent that for the least loaded case a negative loss (increase in total pressure) was observed. The ability to determine the spanwise distribution of blockage was demonstrated. Large blockage was present in the endwall regions due to the corner stall and tip leakage with little blockage in the core flow region. Hub blockage was found to increase rapidly with loading

Detection of SUSY Signals in Stau Neutralino Co-annihilation Region at the LHC

We study the prospects of detecting the signal in the stau neutralino co-annihilation region at the LHC using tau leptons. The co-annihilation signal is characterized by the stau and neutralino mass difference (dM) to be 5-15 GeV to be consistent with the WMAP measurement of the cold dark matter relic density as well as all other experimental bounds within the minimal supergravity model. Focusing on tau's from neutralino_2 --> tau stau --> tau tau neutralino_1 decays in gluino and squark production, we consider inclusive MET+jet+3tau production, with two tau's above a high E_T threshold and a third tau above a lower threshold. Two observables, the number of opposite-signed tau pairs minus the number of like-signed tau pairs and the peak position of the di-tau invariant mass distribution, allow for the simultaneous determination of dM and M_gluino. For dM = 9 GeV and M_gluino = 850 GeV with 30 fb^-1 of data, we can measure dM to 15% and M_gluino to 6%.Comment: 4 pages LaTex, 3 figures. To appear in Proceedings of SUSY06, the 14th International Conference on Supersymmetry and the Unification of Fundamental Interactions, UC Irvine, California, 12-17 June 2006. A typo in a reference is correcte

Macroscopic Elastic Properties of Textured ZrN--AlN Polycrystalline Aggregates: From Ab initio Calculations to Grain-Scale Interactions

Despite the fast development of computational materials modelling, theoretical description of macroscopic elastic properties of textured polycrystalline aggregates starting from basic principles remains a challenging task. In this communication we use a supercell-based approach to obtain the elastic properties of random solid solution cubic ZrAlN system as a function of the metallic sublattice composition and texture descriptors. The employed special quasi-random structures are optimised not only with respect to short range order parameters, but also to make the three cubic directions $[1\,0\,0]$, $[0\,1\,0]$, and $[0\,0\,1]$ as similar as possible. In this way, only a small spread of elastic constants tensor components is achieved and an optimum trade-off between modelling of chemical disorder and computational limits regarding the supercell size is achieved. The single crystal elastic constants are shown to vary smoothly with composition, yielding $x\approx0.4$-0.5 an alloy constitution with an almost isotropic response. Consequently, polycrystals with this composition are suggested to have Young's modulus independent on the actual microstructure. This is indeed confirmed by explicit calculations of polycrystal elastic properties, both within the isotropic aggregate limit, as well as with fibre textures with various orientations and sharpness. It turns out, that for low AlN mole fractions, the spread of the possible Young's moduli data caused by the texture variation can be larger than 100 GPa. Consequently, our discussion of Young's modulus data of cubic ZrAlN contains also the evaluation of the texture typical for thin films.Comment: 10 pages, 6 figures, 3 table

Bose-Einstein condensates with attractive 1/r interaction: The case of self-trapping

Amplifying on a proposal by O'Dell et al. for the realization of Bose-Einstein condensates of neutral atoms with attractive $1/r$ interaction, we point out that the instance of self-trapping of the condensate, without external trap potential, is physically best understood by introducing appropriate "atomic" units. This reveals a remarkable scaling property: the physics of the condensate depends only on the two parameters $N^2 a/a_u$ and $\gamma/N^2$, where $N$ is the particle number, $a$ the scattering length, $a_u$ the "Bohr" radius and $\gamma$ the trap frequency in atomic units. We calculate accurate numerical results for self-trapping wave functions and potentials, for energies, sizes and peak densities, and compare with previous variational results. As a novel feature we point out the existence of a second solution of the extended Gross-Pitaevskii equation for negative scattering lengths, with and without trapping potential, which is born together with the ground state in a tangent bifurcation. This indicates the existence of an unstable collectively excited state of the condensate for negative scattering lengths.Comment: 7 pages, 7 figures, to appear in Phys. Rev.