214 research outputs found

    The Escherichia coli effector EspJ blocks Src kinase activity via amidation and ADP ribosylation

    Get PDF
    J.C.Y. was funded by an MRC PhD studentship. D.J.B. is supported by a London Research Institute, Cancer Research UK Postdoctoral Fellowship award and M.W. is supported by Cancer Research UK. K.A. was supported by the Deutsche Forschungsgemeinschaft (AK 6/22-1 and AK 6/22-2) and the Center for Biological Signaling Studies in Freiburg (Germany). This work was supported by grants from the Wellcome Trust to G.F. and S.J.M

    Polyethylene thickness is a risk factor for wear necessitating insert exchange

    Get PDF
    PURPOSE: The aim of this observational study was to investigate the optimal minimal polyethylene (PE) thickness in total knee arthroplasty (TKA) and identify other risk factors associated with revision of the insert due to wear. METHODS: A total of 84 TKA were followed for 11-16 years. All patients received the same prosthesis design (Interax; Howmedica/ Stryker) with halfbearings: separate PE-inserts medially and laterally. Statistical analysis comprised Cox-regression to correct for confounding. RESULTS: Eight knees (9.5%) had been revised due to thinning inserts and an additional patient is scheduled for revision. PE thickness, diagnosis, BMI and weight are risk factors for insert exchange. For each millimetre decrease in PE thickness, the risk of insert exchange increases 3.0 times, which remains after correction for age, gender, weight, diagnosis and femoral-tibial angle. Insert exchange was 4.73 times more likely in OA-patients compared to RA-patients. For every unit increase in BMI and weight the risk for insert exchange increases 1.40 times and 1.14 times, respectively. CONCLUSIONS: In conclusion we therefore advise against the use of thin PE inserts in modular TKA and recommend PE inserts with a minimal 8-mm thickness.Optimising joint reconstruction management in arthritis and bone tumour patient

    Structural and thermal studies of silver nanoparticles and electrical transport study of their thin films

    Get PDF
    This work reports the preparation and characterization of silver nanoparticles synthesized through wet chemical solution method and of silver films deposited by dip-coating method. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), field emission transmission electron microscopy (FETEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), and energy dispersive spectroscopy (EDX) have been used to characterize the prepared silver nanoparticles and thin film. The morphology and crystal structure of silver nanoparticles have been determined by FESEM, HRTEM, and FETEM. The average grain size of silver nanoparticles is found to be 17.5 nm. The peaks in XRD pattern are in good agreement with that of face-centered-cubic form of metallic silver. TGA/DTA results confirmed the weight loss and the exothermic reaction due to desorption of chemisorbed water. The temperature dependence of resistivity of silver thin film, determined in the temperature range of 100-300 K, exhibit semiconducting behavior of the sample. The sample shows the activated variable range hopping in the localized states near the Fermi level

    Interpol and the Emergence of Global Policing

    Get PDF
    This chapter examines global policing as it takes shape through the work of Interpol, the International Criminal Police Organization. Global policing emerges in the legal, political and technological amalgam through which transnational police cooperation is carried out, and includes the police practices inflected and made possible by this phenomenon. Interpol’s role is predominantly in the circulation of information, through which it enters into relationships and provides services that affect aspects of governance, from the local to national, regional and global. The chapter describes this assemblage as a noteworthy experiment in developing what McKeon called a frame for common action. Drawing on Interpol publications, news stories, interviews with staff, and fieldwork at the General Secretariat in Lyon, France, the history, institutional structure, and daily practices are described. Three cases are analyzed, concerning Red Notices, national sovereignty, and terrorism, in order to explore some of the problems arising in Interpol’s political and technical operating arrangements. In conclusion, international and global policing are compared schematically, together with Interpol’s attempts to give institutional and procedural direction to the still-evolving form of global policing

    Role of Visible Light-Activated Photocatalyst on the Reduction of Anthrax Spore-Induced Mortality in Mice

    Get PDF
    BACKGROUND: Photocatalysis of titanium dioxide (TiO(2)) substrates is primarily induced by ultraviolet light irradiation. Anion-doped TiO(2) substrates were shown to exhibit photocatalytic activities under visible-light illumination, relative environmentally-friendly materials. Their anti-spore activity against Bacillus anthracis, however, remains to be investigated. We evaluated these visible-light activated photocatalysts on the reduction of anthrax spore-induced pathogenesis. METHODOLOGY/PRINCIPAL FINDINGS: Standard plating method was used to determine the inactivation of anthrax spore by visible light-induced photocatalysis. Mouse models were further employed to investigate the suppressive effects of the photocatalysis on anthrax toxin- and spore-mediated mortality. We found that anti-spore activities of visible light illuminated nitrogen- or carbon-doped titania thin films significantly reduced viability of anthrax spores. Even though the spore-killing efficiency is only approximately 25%, our data indicate that spores from photocatalyzed groups but not untreated groups have a less survival rate after macrophage clearance. In addition, the photocatalysis could directly inactivate lethal toxin, the major virulence factor of B. anthracis. In agreement with these results, we found that the photocatalyzed spores have tenfold less potency to induce mortality in mice. These data suggest that the photocatalysis might injury the spores through inactivating spore components. CONCLUSION/SIGNIFICANCE: Photocatalysis induced injuries of the spores might be more important than direct killing of spores to reduce pathogenicity in the host

    Failure of dual radius hydroxyapatite-coated acetabular cups

    Get PDF
    <p>Abstract</p> <p>Introduction</p> <p>Many kind of hydroxyapatite-coated cups were used, with favorable results in short term studies; it was supposed that its use could improve osteointegration of the cup, enhancing thus stability and survivorship. The purpose of this study is to analyze the long term behavior of the hemispheric HA coated, Dual Radius Osteonics cup and to discuss the way of failure through the exam of the revised components and of both periacetabular and osteolysis tissue.</p> <p>Materials and Methods</p> <p>Between 1994 and 1997, at the Department of Orthopedic Sciences of the Insubria University, using the posterolateral approach, were implanted 276 Dual Radius Osteonics<sup>® </sup>in 256 patients, with mean age of 63 years.</p> <p>Results</p> <p>At a mean follow-up of 10 years (range 8–12 years), 183 cups in 165 patients, were available for clinical and radiographical evaluation. 22 Cups among the 183 were revised (11%). The cause of revision was aseptic loosening in 17 cases, septic loosening in one case, periprosthetic fracture in another case, osteolysis and polyethylene wear in two cases and, finally, recurrent dislocations in the last one. In the remaining patients, mean HHS increased from a preoperative value of 50,15 to a postoperative value of 92,69. The mean polyethylene wear was 1,25 mm (min. 0,08, max. 3,9 mm), with a mean annual wear of 0,17 mm. The mean acetabular migration on the two axis was 1,6 mm and 1,8 mm. Peri-acetabular osteolysis were recorded in 89% of the implants (163 cases). The cumulative survivorship (revision as endpoint) at the time was 88,9%.</p> <p>Conclusion</p> <p>Our study confirms the bad behavior of this type of cup probably related to the design, to the method of HA fixation. The observations carried out on the revised cup confirm these hypotheses but did not clarify if the third body wear could be a further problem. Another interesting aspect is the high incidence of osteolysis, which are often asymptomatic becoming a problem for the surgeon as the patient refuses the possibility of a revision.</p

    Analyzing the Impacts of Dams on Riparian Ecosystems: A Review of Research Strategies and Their Relevance to the Snake River Through Hells Canyon

    Get PDF
    River damming provides a dominant human impact on river environments worldwide, and while local impacts of reservoir flooding are immediate, subsequent ecological impacts downstream can be extensive. In this article, we assess seven research strategies for analyzing the impacts of dams and river flow regulation on riparian ecosystems. These include spatial comparisons of (1) upstream versus downstream reaches, (2) progressive downstream patterns, or (3) the dammed river versus an adjacent free-flowing or differently regulated river(s). Temporal comparisons consider (4) pre- versus post-dam, or (5) sequential post-dam conditions. However, spatial comparisons are complicated by the fact that dams are not randomly located, and temporal comparisons are commonly limited by sparse historic information. As a result, comparative approaches are often correlative and vulnerable to confounding factors. To complement these analyses, (6) flow or sediment modifications can be implemented to test causal associations. Finally, (7) process-based modeling represents a predictive approach incorporating hydrogeomorphic processes and their biological consequences. In a case study of Hells Canyon, the upstream versus downstream comparison is confounded by a dramatic geomorphic transition. Comparison of the multiple reaches below the dams should be useful, and the comparison of Snake River with the adjacent free-flowing Salmon River may provide the strongest spatial comparison. A pre- versus post-dam comparison would provide the most direct study approach, but pre-dam information is limited to historic reports and archival photographs. We conclude that multiple study approaches are essential to provide confident interpretations of ecological impacts downstream from dams, and propose a comprehensive study for Hells Canyon that integrates multiple research strategies

    Quantification of ETS exposure in hospitality workers who have never smoked

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Environmental Tobacco Smoke (ETS) was classified as human carcinogen (K1) by the German Research Council in 1998. According to epidemiological studies, the relative risk especially for lung cancer might be twice as high in persons who have never smoked but who are in the highest exposure category, for example hospitality workers. In order to implement these results in the German regulations on occupational illnesses, a valid method is needed to retrospectively assess the cumulative ETS exposure in the hospitality environment.</p> <p>Methods</p> <p>A literature-based review was carried out to locate a method that can be used for the German hospitality sector. Studies assessing ETS exposure using biological markers (for example urinary cotinine, DNA adducts) or questionnaires were excluded. Biological markers are not considered relevant as they assess exposure only over the last hours, weeks or months. Self-reported exposure based on questionnaires also does not seem adequate for medico-legal purposes. Therefore, retrospective exposure assessment should be based on mathematical models to approximate past exposure.</p> <p>Results</p> <p>For this purpose a validated model developed by Repace and Lowrey was considered appropriate. It offers the possibility of retrospectively assessing exposure with existing parameters (such as environmental dimensions, average number of smokers, ventilation characteristics and duration of exposure). The relative risk of lung cancer can then be estimated based on the individual cumulative exposure of the worker.</p> <p>Conclusion</p> <p>In conclusion, having adapted it to the German hospitality sector, an existing mathematical model appears to be capable of approximating the cumulative exposure. However, the level of uncertainty of these approximations has to be taken into account, especially for diseases with a long latency period such as lung cancer.</p

    The controversy of patellar resurfacing in total knee arthroplasty: Ibisne in medio tutissimus?

    Get PDF
    Early arthroplasty designs were associated with a high level of anterior knee pain as they failed to cater for the patello-femoral joint. Patellar resurfacing was heralded as the saviour safeguarding patient satisfaction and success but opinion on its necessity has since deeply divided the scientific community and has become synonymous to topics of religion or politics. Opponents of resurfacing contend that the native patella provides better patellar tracking, improved clinical function, and avoids implant-related complications, whilst proponents argue that patients have less pain, are overall more satisfied, and avert the need for secondary resurfacing. The question remains whether complications associated with patellar resurfacing including those arising from future component revision outweigh the somewhat increased incidence of anterior knee pain recorded in unresurfaced patients. The current scientific literature, which is often affected by methodological limitations and observer bias, remains confusing as it provides evidence in support of both sides of the argument, whilst blinded satisfaction studies comparing resurfaced and non-resurfaced knees generally reveal equivalent results. Even national arthroplasty register data show wide variations in the proportion of patellar resurfacing between countries that cannot be explained by cultural differences alone. Advocates who always resurface or never resurface indiscriminately expose the patella to a random choice. Selective resurfacing offers a compromise by providing a decision algorithm based on a propensity for improved clinical success, whilst avoiding potential complications associated with unnecessary resurfacing. Evidence regarding the validity of selection criteria, however, is missing, and the decision when to resurface is often based on intuitive reasoning. Our lack of understanding why, irrespective of pre-operative symptoms and patellar resurfacing, some patients may suffer pain following TKA and others may not have so far stifled our efforts to make the strategy of selective resurfacing succeed. We should hence devote our efforts in defining predictive criteria and indicators that will enable us to reliably identify those individuals who might benefit from a resurfacing procedure. Level of evidence V

    Family physicians\u27 professional identity formation: a study protocol to explore impression management processes in institutional academic contexts.

    Get PDF
    BACKGROUND: Despite significant differences in terms of medical training and health care context, the phenomenon of medical students\u27 declining interest in family medicine has been well documented in North America and in many other developed countries as well. As part of a research program on family physicians\u27 professional identity formation initiated in 2007, the purpose of the present investigation is to examine in-depth how family physicians construct their professional image in academic contexts; in other words, this study will allow us to identify and understand the processes whereby family physicians with an academic appointment seek to control the ideas others form about them as a professional group, i.e. impression management. METHODS/DESIGN: The methodology consists of a multiple case study embedded in the perspective of institutional theory. Four international cases from Canada, France, Ireland and Spain will be conducted; the \u22case\u22 is the medical school. Four levels of analysis will be considered: individual family physicians, interpersonal relationships, family physician professional group, and organization (medical school). Individual interviews and focus groups with academic family physicians will constitute the main technique for data generation, which will be complemented with a variety of documentary sources. Discourse techniques, more particularly rhetorical analysis, will be used to analyze the data gathered. Within- and cross-case analysis will then be performed. DISCUSSION: This empirical study is strongly grounded in theory and will contribute to the scant body of literature on family physicians\u27 professional identity formation processes in medical schools. Findings will potentially have important implications for the practice of family medicine, medical education and health and educational policies
    corecore