Strange form factors of the proton: a new analysis of the neutrino (antineutrino) data of the BNL-734 experiment

We consider ratios of elastic neutrino(antineutrino)-proton cross sections measured by the Brookhaven BNL-734 experiment and use them to obtain the neutral current (NC) over charged current (CC) neutrino-antineutrino asymmetry. We discuss the sensitivity of these ratios and of the asymmetry to the electric, magnetic and axial strange form factors of the nucleon and to the axial cutoff mass M_A. We show that the effects of the nuclear structure and interactions on the asymmetry and, in general, on ratios of cross sections are negligible. We find some restrictions on the possible values of the parameters characterizing the strange form factors. We show that a precise measurement of the neutrino-antineutrino asymmetry would allow the extraction of the axial and vector magnetic strange form factors in a model independent way. The neutrino-antineutrino asymmetry turns out to be almost independent on the electric strange form factor and on the axial cutoff mass.Comment: 12 page

The processing, properties and use of the pyrotechnic mixture-titanium subhydride/potassium perchlorate

Development of this pyrotechnic occurred because of the need for a static insensitive material to meet personnel safety requirements and related system safety issues in nuclear weapon energetic material component designs. Ti subhydride materials are made by the thermal dehydrding of commercial Ti hydride powder to the desired equivalent hydrogen composition in the Ti lattice. These Ti subhydrides, when blended with K perchlorate, meet the static insensitivity requirement of not being initiated from an equivalent human body electrostatic discharge. Individual material and blend qualification requirements provide a reproducible material from lot to lot. These pyrotechnic formulations meet the high reliability requirements (0.9995) for initiation and performance parameters and have the necessary stability and compatibility to meet long lived requirements of more than 25 years. Various experiences and problems are also discussed that have led to a mature technology for Ti subhydride/K perchlorate during its use in energetic material component designs

Inelastic neutrino and antineutrino scattering on nuclei and ``strangeness'' of the nucleon

Possibilities to extract information on the strange form factors of the nucleon from neutrino (antineutrino) inelastic scattering on nuclei, in an energy range from 200 MeV to 1 GeV and more, are investigated in detail. All calculations are performed within two relativistic independent particle models (Fermi gas and shell model); the final state interactions of the ejected nucleon are taken into account through relativistic optical model potentials. We have shown that the values of the cross sections significantly depend on the nuclear model (especially in the lower energy range). However the NC/CC neutrino-antineutrino asymmetry in a medium--high energy range shows a rather small dependence on the model and allows to disentangle different values of the parameters that characterize the strange form factors. We have calculated also the ratio of the cross sections for inelastic NC scattering of neutrinos on nuclei, with the emission of a proton and of a neutron. Our calculations show that this ratio depends rather weakly on the nuclear model and confirm previous conclusions on the rather strong dependence of this ratio upon the axial strange form factors.Comment: RevTeX file, 35 pages including 12 figure

Limits to the sensitivity of a low noise compact atomic gravimeter

A detailed analysis of the most relevant sources of phase noise in an atomic interferometer is carried out, both theoretically and experimentally. Even a short interrogation time of 100 ms allows our cold atom gravimeter to reach an excellent short term sensitivity to acceleration of $1.4\times 10^{-8}$g at 1s. This result relies on the combination of a low phase noise laser system, efficient detection scheme and good shielding from vibrations. In particular, we describe a simple and robust technique of vibration compensation, which is based on correcting the interferometer signal by using the AC acceleration signal measured by a low noise seismometer.Comment: 30 pages, 14 figure

Observation of a Narrow Resonance of Mass 2.46 GeV/c^2 Decaying to D_s^*+ pi^0 and Confirmation of the D_sJ^* (2317) State

Using 13.5 inverse fb of e+e- annihilation data collected with the CLEO II detector we have observed a narrow resonance in the Ds*+pi0 final state, with a mass near 2.46 GeV. The search for such a state was motivated by the recent discovery by the BaBar Collaboration of a narrow state at 2.32 GeV, the DsJ*(2317)+ that decays to Ds+pi0. Reconstructing the Ds+pi0 and Ds*+pi0 final states in CLEO data, we observe peaks in both of the corresponding reconstructed mass difference distributions, dM(Dspi0)=M(Dspi0)-M(Ds) and dM(Ds*pi0)=M(Ds*pi0)-M(Ds*), both of them at values near 350 MeV. We interpret these peaks as signatures of two distinct states, the DsJ*(2317)+ plus a new state, designated as the DsJ(2463)+. Because of the similar dM values, each of these states represents a source of background for the other if photons are lost, ignored or added. A quantitative accounting of these reflections confirms that both states exist. We have measured the mean mass differences = 350.0 +/- 1.2 [stat] +/- 1.0 [syst] MeV for the DsJ*(2317) state, and = 351.2 +/- 1.7 [stat] +/- 1.0 [syst] MeV for the new DsJ(2463)+ state. We have also searched, but find no evidence, for decays of the two states via the channels Ds*+gamma, Ds+gamma, and Ds+pi+pi-. The observations of the two states at 2.32 and 2.46 GeV, in the Ds+pi0 and Ds*+pi0 decay channels respectively, are consistent with their interpretations as (c anti-strange) mesons with orbital angular momentum L=1, and spin-parities of 0+ and 1+.Comment: 16 pages postscript, also available through http://w4.lns.cornell.edu/public/CLNS, version to be published in Physical Review D; minor modifications and fixes to typographical errors, plus an added section on production properties. The main results are unchanged; they supersede those reported in hep-ex/030501

Study of the q^2-Dependence of B --> pi ell nu and B --> rho(omega)ell nu Decay and Extraction of |V_ub|

We report on determinations of |Vub| resulting from studies of the branching fraction and q^2 distributions in exclusive semileptonic B decays that proceed via the b->u transition. Our data set consists of the 9.7x10^6 BBbar meson pairs collected at the Y(4S) resonance with the CLEO II detector. We measure B(B0 -> pi- l+ nu) = (1.33 +- 0.18 +- 0.11 +- 0.01 +- 0.07)x10^{-4} and B(B0 -> rho- l+ nu) = (2.17 +- 0.34 +0.47/-0.54 +- 0.41 +- 0.01)x10^{-4}, where the errors are statistical, experimental systematic, systematic due to residual form-factor uncertainties in the signal, and systematic due to residual form-factor uncertainties in the cross-feed modes, respectively. We also find B(B+ -> eta l+ nu) = (0.84 +- 0.31 +- 0.16 +- 0.09)x10^{-4}, consistent with what is expected from the B -> pi l nu mode and quark model symmetries. We extract |Vub| using Light-Cone Sum Rules (LCSR) for 0<= q^2<16 GeV^2 and Lattice QCD (LQCD) for 16 GeV^2 <= q^2 < q^2_max. Combining both intervals yields |Vub| = (3.24 +- 0.22 +- 0.13 +0.55/-0.39 +- 0.09)x10^{-3}$ for pi l nu, and |Vub| = (3.00 +- 0.21 +0.29/-0.35 +0.49/-0.38 +-0.28)x10^{-3} for rho l nu, where the errors are statistical, experimental systematic, theoretical, and signal form-factor shape, respectively. Our combined value from both decay modes is |Vub| = (3.17 +- 0.17 +0.16/-0.17 +0.53/-0.39 +-0.03)x10^{-3}.Comment: 45 pages postscript, also available through http://w4.lns.cornell.edu/public/CLNS, submitted to PR

Measurement of Lepton Momentum Moments in the Decay bar{B} \to X \ell \bar{\nu} and Determination of Heavy Quark Expansion Parameters and |V_cb|

We measure the primary lepton momentum spectrum in B-bar to X l nu decays, for p_l > 1.5 GeV/c in the B rest frame. From this, we calculate various moments of the spectrum. In particular, we find R_0 = [int(E_l>1.7) (dGam/dE_sl)*dE_l] / [int(E_l>1.5) (dGam/dE_sl)*dE_l] = 0.6187 +/- 0.0014_stat +/- 0.0016_sys and R_1 = [int(E_l>1.5) E_l(dGam/dE_sl)*dE_l] / [int(E_l>1.5) (dGam/dE_sl)*dE_l] = (1.7810 +/- 0.0007_stat +/- 0.0009_sys) GeV. We use these moments to determine non-perturbative parameters governing the semileptonic width. In particular, we extract the Heavy Quark Expansion parameters Lambda-bar = (0.39 +/- 0.03_stat +/- 0.06_sys +/- 0.12_th) GeV and lambda_1 = (-0.25 +/- 0.02_stat +/- 0.05_sys +/- 0.14_th) GeV^2. The theoretical constraints used are evaluated through order 1/M_B^3 in the non-perturbative expansion and beta_0*alpha__s^2 in the perturbative expansion. We use these parameters to extract |V_cb| from the world average of the semileptonic width and find |V_cb| = (40.8 +/- 0.5_Gam-sl +/- 0.4_(lambda_1,Lambda-bar)-exp +/- 0.9_th) x 10^-3. In addition, we extract the short range b-quark mass m_b^1S = (4.82 +/- 0.07_exp +/- 0.11_th) GeV/c^2. Finally, we discuss the implications of our measurements for the theoretical understanding of inclusive semileptonic processes.Comment: 21 pages postscript, also available through http://w4.lns.cornell.edu/public/CLNS, submitted to PR