Control considerations for high frequency, resonant, power processing equipment used in large systems

Addressed is a class of resonant power processing equipment designed to be used in an integrated high frequency (20 KHz domain), utility power system for large, multi-user spacecraft and other aerospace vehicles. It describes a hardware approach, which has been the basis for parametric and physical data used to justify the selection of high frequency ac as the PMAD baseline for the space station. This paper is part of a larger effort undertaken by NASA and General Dynamics to be sure that all potential space station contractors and other aerospace power system designers understand and can comfortably use this technology, which is now widely used in the commercial sector. In this paper, we will examine control requirements, stability, and operational modes; and their hardware impacts from an integrated system point of view. The current space station PMAD system will provide the overall requirements model to develop an understanding of the performance of this type of system with regard to: (1) regulation; (2) power bus stability and voltage control; (3) source impedance; (4) transient response; (5) power factor effects, and (6) limits and overloads

Relationship between resistivity and specific heat in a canonical non-magnetic heavy fermion alloy system: UPt_5-xAu_x

UPt_(5-x)Au_x alloys form in a single crystal structure, cubic AuBe_5-type, over a wide range of concentrations from x = 0 to at least x = 2.5. All investigated alloys, with an exception for x = 2.5, were non-magnetic. Their electronic specific heat coefficient $\gamma$ varies from about 60 (x = 2) to about 700 mJ/mol K^2 (x = 1). The electrical resistivity for all alloys has a Fermi-liquid-like temperature variation, \rho = \rho_o + AT^2, in the limit of T -> 0 K. The coefficient A is strongly enhanced in the heavy-fermion regime in comparison with normal and transition metals. It changes from about 0.01 (x = 0) to over 2 micro-ohm cm/K^2 (x = 1). A/\gamma^2, which has been postulated to have a universal value for heavy-fermions, varies from about 10^-6 (x = 0, 0.5) to 10^-5 micro-ohm cm (mol K/mJ)^2 (x > 1.1), thus from a value typical of transition metals to that found for some other heavy-fermion metals. This ratio is unaffected, or only weakly affected, by chemical or crystallographic disorder. It correlates with the paramagnetic Curie-Weiss temperature of the high temperature magnetic susceptibility.Comment: 5 pages, 5 eps figures, RevTe

Computable General Equilibrium Modeling for Regional Analysis

Partial equilibrium analysis illustrates results for one market at a time. However, there often exist market interactions and thus market feedbacks. Pricing outcomes in one market usually have effects in other markets, and these effects, in turn, create ripples throughout the economy, perhaps even to the extent of affecting the price-quantity equilibrium in the original market. To represent this complex set of economic relationships, it is necessary to go beyond partial equilibrium analysis and construct a model that permits viewing many markets simultaneously. This Web Book provides an introduction to and overview of the general equilibrium modeling framework in the context of regional analysis.https://researchrepository.wvu.edu/rri-web-book/1023/thumbnail.jp

Variable-Speed Induction Motor Drives for Aircraft Environmental Control Compressors

New, more-efficient designs for aircraft jet engines are not capable of supplying the large quantities of bleed air necessary to provide pressurization and air conditioning for the environmental control systems (ECS) of the next generation of large passenger aircraft. System analysis and engineering have determined that electrically-driven ECS can help to maintain the improved fuel efficiencies; and electronic controllers and induction motors are now being developed in a NASA/NPD SBIR Program to drive both types of ECS compressors. Previous variable-speed induction motor/controller system developments and publications have primarily focused on field-oriented control, with large transient reserve power, for maximum acceleration and optimum response in actuator and robotics systems. The application area addressed herein is characterized by slowly-changing inputs and outputs, small reserve power capability for acceleration, and optimization for maximum efficiency. This paper therefore focuses on the differences between this case and the optimum response case, and shows the development of this new motor/controller approach. It starts with the creation of a new set of controller requirements. In response to those requirements, new control algorithms are being developed and implemented in an embedded computer, which is integrated into the motor controller closed loop. Buffered logic outputs are used to drive the power switches in a resonant-technology, power processor/motor-controller, at switching/resonant frequencies high enough to support efficient high-frequency induction motor operation at speeds up to 50,000-RP

Spin states of zigzag-edged Mobius graphene nanoribbons from first principles

Mobius graphene nanoribbons have only one edge topologically. How the magnetic structures, previously associated with the two edges of zigzag-edged flat nanoribbons or cyclic nanorings, would change for their Mobius counterparts is an intriguing question. Using spin-polarized density functional theory, we shed light on this question. We examine spin states of zigzag-edged Mobius graphene nanoribbons (ZMGNRs) with different widths and lengths. We find a triplet ground state for a Mobius cyclacene, while the corresponding two-edged cyclacene has an open-shell singlet ground state. For wider ZMGNRs, the total magnetization of the ground state is found to increase with the ribbon length. For example, a quintet ground state is found for a ZMGNR. Local magnetic moments on the edge carbon atoms form domains of majority and minor spins along the edge. Spins at the domain boundaries are found to be frustrated. Our findings show that the Mobius topology (i.e., only one edge) causes ZMGNRs to favor one spin over the other, leading to a ground state with non-zero total magnetization.Comment: 17 pages, 4 figure

Magnetic and chemical properties of Cr-based films grown on GaAs(001)

We have investigated the magnetic and chemical properties of very thin Cr films, CrAs, and arsenized Cr grown by molecular beam epitaxy on Ga As (001), using x-ray photoemission spectroscopy and SQUID magnetometry. Distintic preparation procedures have been used with the purpose to undestand the origin of the ferromagneti signal observed for this system. It results that Ga segregation and chemical reactivity between Ga and Cr have negligible contribution in the formation of different thi films. A clear ferromagnetic response even at room temperature suggests the existence of a very thin interfacial layer formed that can eventually be burid during the growth process.Comment: 16 pages, 6 figure

Comment on "On the subtleties of searching for dark matter with liquid xenon detectors"

In a recent manuscript (arXiv:1208.5046) Peter Sorensen claims that XENON100's upper limits on spin-independent WIMP-nucleon cross sections for WIMP masses below 10 GeV "may be understated by one order of magnitude or more". Having performed a similar, though more detailed analysis prior to the submission of our new result (arXiv:1207.5988), we do not confirm these findings. We point out the rationale for not considering the described effect in our final analysis and list several potential problems with his study.Comment: 3 pages, no figure

Abelian functions associated with a cyclic tetragonal curve of genus six

We develop the theory of Abelian functions defined using a tetragonal curve of genus six, discussing in detail the cyclic curve y^4 = x^5 + λ[4]x^4 + λ[3]x^3 + λ[2]x^2 + λ[1]x + λ[0]. We construct Abelian functions using the multivariate sigma-function associated with the curve, generalizing the theory of theWeierstrass℘-function. We demonstrate that such functions can give a solution to the KP-equation, outlining how a general class of solutions could be generated using a wider class of curves. We also present the associated partial differential equations satisfied by the functions, the solution of the Jacobi inversion problem, a power series expansion for σ(u) and a new addition formula