19,181 research outputs found
Statistical analysis of a planetary radar altimeter measuring unit
Statistical analysis of altitude measuring unit of lightweight continuous wave radar altimete
Hydrogen detection study
The effectiveness was assessed of a hydrogen (H2) detection concept for regenerative environmental control life support systems (EC/LSS). The concept evaluated was that utilized for the electrochemical depolarized concentrator (EDC) design, constructed, and tested for the EC/LSS space station prototype program. The EDC contains combustible gas detectors (CGDs) which were evaluated with H2. The CGDs were evaluated for linearity, position sensitivity, reproducibility, ambient effects, repeatability, speed of response, recovery time, and interchangeability. The effectiveness of CGDs located within the EDC for sensing H2 leaks at various line replaceable units in the subsystem was determined. The effects of H2 leak rate, H2 concentration of leaking gas and air currents in the vicinity of the EDC were determined. Proposed improvements for the H2 detection concept were documented and alternative H2 detection approaches were identified and analyzed
Investigation of abort procedures for space shuttle-type vehicles
An investigation has been made of abort procedures for space shuttle-type vehicles using a point mass trajectory optimization program known as POST. This study determined the minimum time gap between immediate and once-around safe return to the launch site from a baseline due-East launch trajectory for an alternate space shuttle concept which experiences an instantaneous loss of 25 percent of the total main engine thrust
Space infrared telescope pointing control system. Automated star pattern recognition
The Space Infrared Telescope Facility (SIRTF) is a free flying spacecraft carrying a 1 meter class cryogenically cooled infrared telescope nearly three oders of magnitude most sensitive than the current generation of infrared telescopes. Three automatic target acquisition methods will be presented that are based on the use of an imaging star tracker. The methods are distinguished by the number of guidestars that are required per target, the amount of computational capability necessary, and the time required for the complete acquisition process. Each method is described in detail
The effect of interplanetary trajectory options on a manned Mars aerobrake configuration
Manned Mars missions originating in low Earth orbit (LEO) in the time frame 2010 to 2025 were analyzed to identify preferred mission opportunities and their associated vehicle and trajectory characteristics. Interplanetary and Mars atmospheric trajectory options were examined under the constraints of an initial manned exploration scenario. Two chemically propelled vehicle options were considered: (1) an all propulsive configuration, and (2) a configuration which employs aerobraking at Earth and Mars with low lift/drag (L/D) shapes. Both the interplanetary trajectory options as well as the Mars atmospheric passage are addressed to provide a coupled trajectory simulation. Direct and Venus swingby interplanetary transfers with a 60 day Mars stopover are considered. The range and variation in both Earth and Mars entry velocity are also defined. Two promising mission strategies emerged from the study: (1) a 1.0 to 2.0 year Venus swingby mission, and (2) a 2.0 to 2.5 year direct mission. Through careful trajectory selection, 11 mission opportunities are identified in which the Mars entry velocity is between 6 and 10 km/sec and Earth entry velocity ranges from 11.5 to 12.5 km/sec. Simulation of the Earth return aerobraking maneuver is not performed. It is shown that a low L/D configuration is not feasible for Mars aerobraking without substantial improvements in the interplanetary navigation system. However, even with an advanced navigation system, entry corridor and aerothermal requirements restrict the number of potential mission opportunities. It is also shown that for a large blunt Mars aerobrake configuration, the effects of radiative heating can be significant at entry velocities as low as 6.2 km/sec and will grow to dominate the aerothermal environment at entry velocities above 8.5 km/sec. Despite the additional system complexity associated with an aerobraking vehicle, the use of aerobraking was shown to significantly lower the required initial LEO weight. In comparison with an all propulsive mission, savings between 19 and 59 percent were obtained depending upon launch date
Six-man, self-contained carbon dioxide concentrator system
A six man, self contained electrochemical carbon dioxide concentrating subsystem was successfully designed and fabricated. It was a preprototype engineering model designed to nominally remove 6.0 kg (13.2 lb) CO2/day with an inlet air CO2 partial pressure of 400 N/sq m (3 mm Hg) and an overcapacity removal capability of 12.0 kg (26.4 lb) CO2/day. The design specifications were later expanded to allow operation at space station prototype CO2 collection subsystem operating conditions
Disc Brake Energy Conversion
The original goal of this project was to complete the design and building of a disc brake energy conversion project started by a former senior project team, and then spend a majority of the year performing testing in order to see if the device could be used to accurately calculate the Joule\u27s constant. However, due to unforeseen complications and obstacles, the design and manufacturing portion of the project ended up taking much longer than anticipated. A majority of this time was spent designing the hydraulic plumbing system that would actuate the brakes. The previous team purchased some hydraulic parts and left them unassembled with no hydraulic schematic, and in order to save money, one of our goals was to use as many of the previous team\u27s purchased parts as possible. This led to us attempting to complete their hydraulic design using the few parts they had left behind. However, after some time we discovered that the parts they had purchased would not work with the system we were trying to create. After discussion with multiple professors and shop techs, we discovered a hydraulic schematic created by W.C. Branham that would be perfect for our device. After making a few changes to the design, we were able to start manufacturing the hydraulic system using hand-held tube benders and tube cutters. Once the tubing was assembled, we bled the air out of the hydraulic portion of the system and filled it with hydraulic fluid. Then, in order to measure the temperature of the thermistor in the copper brake pads, we programmed an Arduino read the thermistor and collect data. This left us with only three weeks to test; however, through our testing and analysis, we were able to calculate a Joule\u27s constant within 35% of the accepted value. The error in the calculated value came from heat loss that was not accounted for by our thermal model for the system. In an attempt to reduce the heat loss, we insulated the rear of the thermistor using Styrofoam and improved the thermal conductivity between the thermistor and copper pad using thermal paste. Although this improved our measured temperature, we believe we were still losing a lot of heat out of the back of the copper pad. Even though we had limited time to test, we believe that we proved that with further testing and analysis this device can be used to accurately and consistently calculate the Joule\u27s constant
A Study of the Effects of Atmospheric Phenomena on Mars Science Laboratory Entry Performance
At Earth during entry the shuttle has experienced what has come to be known as potholes in the sky or regions of the atmosphere where the density changes suddenly. Because of the small data set of atmospheric information where the Mars Science Laboratory (MSL) parachute deploys, the purpose of this study is to examine the effect similar atmospheric pothole characteristics, should they exist at Mars, would have on MSL entry performance. The study considers the sensitivity of entry design metrics, including altitude and range error at parachute deploy and propellant use, to pothole like density and wind phenomena
Optimum sensitive area of surface acoustic wave resonator chemical and bio-sensors
A model is developed to map the variation of sensitivity of a surface acoustic wave (SAW) resonator sensor over its surface, in order to find the region with maximum sensitivity. The model is based on a combined coupling of modes (COM) and periodic Green's function analysis. In order to extend the analysis to layered media, a new efficient technique is introduced to account for the mechanical interactions with buried electrodes. Using this technique the sensitivity calculations are found to be in good agreement with measurements. It is also shown that whilst changes in other parameters influence the sensitivity, it is the velocity change which most strongly determines the overall frequency change
- …