Fano Interference in Microwave Resonator Measurements

Resonator measurements are a simple but powerful tool to characterize a material's microwave response. The losses of a resonant mode are quantified by its internal quality factor $Q_\mathrm{i}$, which can be extracted from the scattering coefficient in a microwave reflection or transmission measurement. Here we show that a systematic error on $Q_\mathrm{i}$ arises from Fano interference of the signal with a background path. Limited knowledge of the interfering paths in a given setup translates into a range of uncertainty for $Q_\mathrm{i}$, which increases with the coupling coefficient. We experimentally illustrate the relevance of Fano interference in typical microwave resonator measurements and the associated pitfalls encountered in extracting $Q_\mathrm{i}$. On the other hand, we also show how to characterize and utilize the Fano interference to eliminate the systematic error

Amorphous NiCu Thin Films Sputtered on TiO2 Nanotube Arrays: A Noble-Metal Free Photocatalyst for Hydrogen Evolution

In this work, NiCu co-catalysts on TiO2 are studied for photocatalytic hydrogen evolution. NiCu co-catalyst films are deposited at room temperature by argon plasma sputtering on high aspect-ratio anodic TiO2 nanotubes. To tune the Ni : Cu atomic ratio, alloys of various compositions were used as sputtering targets. Such co-catalyst films are found to be amorphous with small nanocrystalline domains. A series of parameters is investigated, i. e., i) Ni : Cu relative ratio in the sputtered films, ii) NiCu film thickness, and iii) thickness of the TiO2 nanotube layers. The highest photocatalytic activity is obtained with 8 μm long TiO2 nanotubes, sputter-coated with a 10 nm-thick NiCu films with a 1 : 1 Ni : Cu atomic ratio. This photocatalyst reaches a stable hydrogen evolution rate of 186 μL h−1 cm−2, 4.6 and 3 times higher than that of Ni- and Cu-TiO2, respectively, demonstrating a synergistic co-catalytic effect of Ni and Cu in the alloy co-catalyst film

Granular aluminium nanojunction fluxonium qubit

Mesoscopic Josephson junctions, consisting of overlapping superconducting electrodes separated by a nanometre-thin oxide layer, provide a precious source of nonlinearity for superconducting quantum circuits. Here we show that in a fluxonium qubit, the role of the Josephson junction can also be played by a lithographically defined, self-structured granular aluminium nanojunction: a superconductor–insulator–superconductor Josephson junction obtained in a single-layer, zero-angle evaporation. The measured spectrum of the resulting qubit, which we nickname gralmonium, is indistinguishable from that of a standard fluxonium. Remarkably, the lack of a mesoscopic parallel plate capacitor gives rise to an intrinsically large granular aluminium nanojunction charging energy in the range of tens of gigahertz, comparable to its Josephson energy. We measure coherence times in the microsecond range and we observe spontaneous jumps of the value of the Josephson energy on timescales from milliseconds to days, which offers a powerful diagnostics tool for microscopic defects in superconducting materials

The Threat of Capital Drain: A Rationale for Public Banks?

This paper yields a rationale for why subsidized public banks may be desirable from a regional perspective in a financially integrated economy. We present a model with credit rationing and heterogeneous regions in which public banks prevent a capital drain from poorer to richer regions by subsidizing local depositors, for example, through a public guarantee. Under some conditions, cooperative banks can perform the same function without any subsidization; however, they may be crowded out by public banks. We also discuss the impact of the political structure on the emergence of public banks in a political-economy setting and the role of interregional mobility

Synthesis and Characterisation of Hierarchically Structured Titanium Silicalite‐1 Zeolites with Large Intracrystalline Macropores

The successful synthesis of hierarchically structured titanium silicalite‐1 (TS‐1) with large intracrystalline macropores by steam‐assisted crystallisation of mesoporous silica particles is reported. The macropore topology was imaged in 3D by using electron tomography and synchrotron radiation‐based ptychographic X‐ray computed tomography, revealing interconnected macropores within the crystals accounting for about 30 % of the particle volume. The study of the macropore formation mechanism revealed that the mesoporous silica particles act as a sacrificial macropore template during the synthesis. Silicon‐to‐titanium ratio of the macroporous TS‐1 samples was successfully tuned from 100 to 44. The hierarchically structured TS‐1 exhibited high activity in the liquid phase epoxidation of 2‐octene with hydrogen peroxide. The hierarchically structured TS‐1 surpassed a conventional nano‐sized TS‐1 sample in terms of alkene conversion and showed comparable selectivity to the epoxide. The flexible synthesis route described here can be used to prepare hierarchical zeolites with improved mass transport properties for other selective oxidation reactions

sp‐Carbon incorporated conductive metal‐organic framework as photocathode for photoelectrochemical hydrogen generation

Metal-organic frameworks (MOFs) have attracted increasing interest for broad applications in catalysis and gas separation due to their high porosity. However, the insulating feature and the limited active sites hindered MOFs as photocathode active materials for application in photoelectrocatalytic hydrogen generation. Herein, we develop a layered conductive two-dimensional conjugated MOF (2D c-MOF) comprising sp-carbon active sites based on arylene-ethynylene macrocycle ligand via CuO4 linking, named as Cu3HHAE2. This sp-carbon 2D c-MOF displays apparent semiconducting behavior and broad light absorption till the near-infrared band (1600 nm). Due to the abundant acetylene units, the Cu3HHAE2 could act as the first case of MOF photocathode for photoelectrochemical (PEC) hydrogen generation and presents a record hydrogen-evolution photocurrent density of ≈260 μA cm−2 at 0 V vs. reversible hydrogen electrode among the structurally-defined cocatalyst-free organic photocathodes

Profile of Lipid and Protein Autacoids in Diabetic Vitreous Correlates With the Progression of Diabetic Retinopathy

OBJECTIVE: This study was aimed at obtaining a profile of lipids and proteins with a paracrine function in normal and diabetic vitreous and exploring whether the profile correlates with retinal pathology. RESEARCH DESIGN AND METHODS: Vitreous was recovered from 47 individuals undergoing vitreoretinal surgery: 16 had nonproliferative diabetic retinopathy (NPDR), 15 had proliferative diabetic retinopathy, 7 had retinal detachments, and 9 had epiretinal membranes. Protein and lipid autacoid profiles were determined by protein arrays and mass spectrometry-based lipidomics. RESULTS: Vitreous lipids included lipoxygenase (LO)- and cytochrome P450 epoxygenase (CYP)-derived eicosanoids. The most prominent LO-derived eicosanoid was 5-hydroxyeicosate traenoic acid (HETE), which demonstrated a diabetes-specific increase (P = 0.027) with the highest increase in NPDR vitreous. Vitreous also contained CYP-derived epoxyeicosatrienoic acids; their levels were higher in nondiabetic than diabetic vitreous (P < 0.05). Among inflammatory, angiogenic, and angiostatic cytokines and chemokines, only vascular endothelial growth factor (VEGF) showed a significant diabetes-specific profile (P < 0.05), although a similar trend was noted for tumor necrosis factor (TNF)-alpha. Soluble VEGF receptors R1 and R2 were detected in all samples with lowest VEGF-R2 levels (P < 0.05) and higher ratio of VEGF to its receptors in NPDR and PDR vitreous. CONCLUSIONS: This study is the first to demonstrate diabetes-specific changes in vitreous lipid autacoids including arachidonate and docosahexanoate-derived metabolites indicating an increase in inflammatory versus anti-inflammatory lipid mediators that correlated with increased levels of inflammatory and angiogenic proteins, further supporting the notion that inflammation plays a role the pathogenesis of this disease

Service robotics: do you know your new companion? Framing an interdisciplinary technology assessment

Service-Robotic—mainly defined as “non-industrial robotics”—is identified as the next economical success story to be expected after robots have been ubiquitously implemented into industrial production lines. Under the heading of service-robotic, we found a widespread area of applications reaching from robotics in agriculture and in the public transportation system to service robots applied in private homes. We propose for our interdisciplinary perspective of technology assessment to take the human user/worker as common focus. In some cases, the user/worker is the effective subject acting by means of and in cooperation with a service robot; in other cases, the user/worker might become a pure object of the respective robotic system, for example, as a patient in a hospital. In this paper, we present a comprehensive interdisciplinary framework, which allows us to scrutinize some of the most relevant applications of service robotics; we propose to combine technical, economical, legal, philosophical/ethical, and psychological perspectives in order to design a thorough and comprehensive expert-based technology assessment. This allows us to understand the potentials as well as the limits and even the threats connected with the ongoing and the planned implementation of service robots into human lifeworld—particularly of those technical systems displaying increasing grades of autonomy

Problematic Stabilizing Films in Petroleum Emulsions: Shear Rheological Response of Viscoelastic Asphaltene Films and the Effect on Drop Coalescence

Adsorption of asphaltenes at the water-oil interface contributes to the stability of petroleum emulsions by forming a networked film that can hinder drop-drop coalescence. The interfacial microstructure can either be liquid-like or solid-like, depending on (i) initial bulk concentration of asphaltenes, (ii) interfacial aging time, and (iii) solvent aromaticity. Two techniques--interfacial shear rheology and integrated thin film drainage apparatus--provided equivalent interface aging conditions, enabling direct correlation of the interfacial rheology and droplet stability. The shear rheological properties of the asphaltene film were found to be critical to the stability of contacting drops. With a viscous dominant interfacial microstructure, the coalescence time for two drops in intimate contact was rapid, on the order of seconds. However, as the elastic contribution develops and the film microstructure begins to be dominated by elasticity, the two drops in contact do not coalescence. Such step-change transition in coalescence is thought to be related to the high shear yield stress (~10(4) Pa), which is a function of the film shear yield point and the film thickness (as measured by quartz crystal microbalance), and the increased elastic stiffness of the film that prevents mobility and rupture of the asphaltene film, which when in a solid-like state provides an energy barrier against drop coalescence