Thermal Conductivity, Heat Sources and Temperature Profiles of Li-ion Secondary Batteries

We measure and report the thermal conductivity of several commercial and non-commercial Li-ion secondary battery electrode materials, with and without electrolyte solvents. We also measure the Tafel potential, the ohmic resistance, reaction entropy and external temperature of a commercial pouch cell secondary Li-ion battery. Finally we combine all the experimentally obtained data in a thermal Fourier model and discuss the corresponding internal and external temperature profiles during charging and discharging. Electrochemical accumulators and power sources can be both very effective and efficient energy converters. However, as one seeks to intensify both volumetric and specific capacity the heat of these is an inevitable topic in engineering. Moreover, in order to increase performance, the electrodes are necessarily made porous, so that the active specific surface can be increased. In doing so, the thermal conductivity can be lowered by several orders of magnitude. Literature describing thermal conductivity of this property of different Li-ion electrodes is scarse, according to recent reviews e.g. [1], although it is very important. For the ex-situ thermal conductivity measurements we chose commercial electrode materials and for the temperature profile measurements and the electrochemical characterisation we chose a commercial Li-ion pouch cell battery. The electrode materials that we investigated with respect to thermal conductivity were a commercial cathode material (LiCoO 3 ) and a commercial anode material (SLP50). These materials were measured with in an already established procedure [2], both as dry pristine electrode and with a surplus of an electrolyte solvent. The commercial battery was characterised by classical charge and discharge cycling at different current rates.. These experiments were performed in a temperature regulated cabinet with a thermocouple on the battery surface and another in the ambient air. Thus all information required to model the battery's internal and external temperature profiles were collected for the modelling part. The thermal conductivity of dry and soaked electrode material was found to be 0.30 ±0.01 and 0.89±0.04 W K -1 m -1 for the anode material and 0.36±0.003 and 1.10±0.06 for the cathode material. For all materials examined it was found that adding electrolyte solvent increased the thermal conductivity by at least a factor of three. Measuring and combining the surface and the ambient temperatures of an air cooled commercial pouch cell battery at ±2°C, the electric heat sources, and the thermal conductivity of the electrode components made it possible to estimate internal and external temperature profiles at any current density. At 12C charging rate (corresponding to 5 minutes complete charging) the internal temperature differences was estimated to be in the range of 3-4 K, depending on the electrode thermal conductivity. The external temperature drop in air flowing (by forced convection) at the battery surface was estimated to nearly 70K. Thus it is clear that though it is the external temperature gradients that need the most attention with respect to engineered cooling, also internal temperatures become significant at large current rates

Continental weathering and recovery from ocean nutrient stress during the Early Triassic Biotic Crisis

Following the latest Permian extinction ∼252 million years ago, normal marine and terrestrial ecosystems did not recover for another 5-9 million years. The driver(s) for the Early Triassic biotic crisis, marked by high atmospheric CO2 concentration, extreme ocean warming, and marine anoxia, remains unclear. Here we constrain the timing of authigenic K-bearing mineral formation extracted from supergene weathering profiles of NW-Pangea by Argon geochronology, to demonstrate that an accelerated hydrological cycle causing intense chemical alteration of the continents occurred between ∼254 and 248 Ma, and continued throughout the Triassic period. We show that enhanced ocean nutrient supply from this intense continental weathering did not trigger increased ocean productivity during the Early Triassic biotic crisis, due to strong thermal ocean stratification off NW Pangea. Nitrogen isotope constraints suggest, instead, that full recovery from ocean nutrient stress, despite some brief amelioration ∼1.5 million years after the latest Permian extinction, did not commence until climate cooling revitalized the global upwelling systems and ocean mixing ∼10 million years after the mass extinction

Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat

Correction to: Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

The original version of this article unfortunately contained a mistake

Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat

Electronic properties of reduced molybdenum oxides

The electronic properties of MoO3 and reduced molybdenum oxide phases are studied by density functional theory (DFT) alongside characterization of mixed phase MoOx films. Molybdenum oxide is utilized in compositions ranging from MoO3 to MoO2 with several intermediary phases. With increasing degree of reduction, the lattice collapses and the layered MoO3 structure is lost. This affects the electronic and optical properties, which range from the wide band gap semiconductor MoO3 to metallic MoO2. DFT is used to determine the stability of the most relevant molybdenum oxide phases, in comparison to oxygen vacancies in the layered MoO3 lattice. The non-layered phases are more stable than the layered MoO3 structure for all oxygen stoichiometries of MoOx studied where 2 $ x textless 3. Reduction and lattice collapse leads to strong changes in the electronic density of states, especially the filling of the Mo 4d states. The DFT predictions are compared to experimental studies of molybdenum oxide films within the same range of oxygen stoichiometries. We find that whilst MoO2 is easily distinguished from MoO3, intermediate phases and phase mixtures have similar electronic structures. The effect of the different band structures is seen in the electrical conductivity and optical transmittance of the films. Insight into the oxide phase stability ranges and mixtures is not only important for understanding molybdenum oxide films for optoelectronic applications, but is also relevant to other transition metal oxides, such as WO3, which exist in analogous forms

Surface stability of epitaxial La0.7Sr0.3MnO3 thin films on (111)-oriented SrTiO3

We report on the stability of the La0.7Sr0.3MnO3 thin film surface when deposited on (111)-oriented SrTiO3. For ultrathin La0.7Sr0.3MnO3 films, an initial 3-dimensional morphology is observed, which becomes 2-dimensional with increasing film thickness. For even thicker samples, we show that the surface morphology evolves from 2-dimensional to 3-dimensional and that this observation is consistent with an Asaro-Tiller-Grinfeld instability, which can be controlled by the deposition temperature. This allows for synthesis of films with step-and-terrace surfaces over a wide range of thicknesses. Structural characterization by x-ray diffraction and transmission electron microscopy shows that the films are strained to the SrTiO3 substrate and reveals the presence of an elongated out-of-plane lattice parameter at the interface with SrTiO3