Evaluation of bread crumbs as a potential carbon source for the growth of Thraustochytrid species for oil and omega-3 production

The utilization of food waste by microorganisms to produce omega-3 fatty acids or biofuel is a potentially low cost method with positive environmental benefits. In the present study, the marine microorganisms Thraustochytrium sp. AH-2 and Schizochytrium sp. SR21 were used to evaluate the potential of breadcrumbs as an alternate carbon source for the production of lipids under static fermentation conditions. For the Thraustochytrium sp. AH-2, submerged liquid fermentation with 3% glucose produced 4.3 g/L of biomass and 44.16 mg/g of saturated fatty acids after seven days. Static fermentation with 0.5% and 1% breadcrumbs resulted in 2.5 and 4.7 g/L of biomass, and 42.4 and 33.6 mg/g of saturated fatty acids, respectively. Scanning electron microscopic (SEM) studies confirmed the growth of both strains on breadcrumbs. Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy for both strains were consistent with the utilization of breadcrumbs for the production of unsaturated lipids, albeit at relatively low levels. The total lipid yield for static fermentation with bread crumbs was marginally lower than that of fermentation with glucose media, while the yield of unsaturated fatty acids was considerably lower, indicating that static fermentation may be more appropriate for the production of biodiesel than for the production of omega-3 rich oils in these strains

High strength/density ratio in a syntactic foam made from one-part mix geopolymer and cenospheres

By designing a composite of one-part mix geopolymer and hollow cenospheres, a commercially viable and environmentally-friendly foam was synthesised with a high strength/density ratio. The composite is made of a dry mix powder of geopolymer source materials, sodium silicate alkali activator and cenospheres, which starts to react when mixed with water. As the geopolymer reacts and gains strength over time, the surface of the cenospheres takes part in the reaction and forms a strong bond with the binding matrix. Synchrotron-based Fourier transform infrared microspectroscopy revealed, for the first time, the chemical bonding interaction of the amorphous interfacial layer between the geopolymer and cenospheres. The resulting foam composite gained a strength of 17.5 MPa at a density of 978 kg/m3, which is noticeably higher than that of existing environmentally-friendly lightweight foams made under ambient conditions. The thermal conductivity of the foam was measured to be around 0.28 kW/mK, which is similar to that of foam concrete. This foam produced in this study is found to be lightweight, strong and possess a desirable insulating capacity, while the preparation process of the one-part mix composite is maintained simply by adding water and curing the mixture at an ambient temperature

FTIR microspectroscopy for rapid screening and monitoring of polyunsaturated fatty acid production in commercially valuable marine yeasts and protists

The increase in polyunsaturated fatty acid (PUFA) consumption has prompted research into alternative resources other than fish oil. In this study, a new approach based on focal-plane-array Fourier transform infrared (FPA-FTIR) microspectroscopy and multivariate data analysis was developed for the characterisation of some marine microorganisms. Cell and lipid compositions in lipid-rich marine yeasts collected from the Australian coast were characterised in comparison to a commercially available PUFA-producing marine fungoid protist, thraustochytrid. Multivariate classification methods provided good discriminative accuracy evidenced from (i) separation of the yeasts from thraustochytrids and distinct spectral clusters among the yeasts that conformed well to their biological identities, and (ii) correct classification of yeasts from a totally independent set using cross-validation testing. The findings further indicated additional capability of the developed FPA-FTIR methodology, when combined with partial least squares regression (PLSR) analysis, for rapid monitoring of lipid production in one of the yeasts during the growth period, which was achieved at a high accuracy compared to the results obtained from the traditional lipid analysis based on gas chromatography. The developed FTIR-based approach when coupled to programmable withdrawal devices and a cytocentrifugation module would have strong potential as a novel online monitoring technology suited for bioprocessing applications and large-scale production

Engineering of a biomimetic interface between a native dental tissue and restorative composite and its study using synchrotron ftir microscopic mapping

The aim of this work is to develop a biomimetic interface between the natural tooth tissue and the restorative composite and to study it on the basis of synchrotron micro-FTIR mapping and multidimensional processing of the spectral data array. Using hierarchical cluster analysis of 3D FTIR data revealed marked improvements in the formation of the dentine/adhesive/dental hybrid interface using a biomimetic approach. The use of a biomimetic strategy (application of an amino acid– modified primer, alkaline calcium and a nano-c-HAp–modified adhesive) allowed the formation of a matrix that can be structurally integrated with natural dentine and dental composite. The biomimetic hybrid layer was characterised by homogeneous chemical composition and a higher degree of conversion of the adhesive during polymerisation, which should provide optimal integration of the dental composite with the dentine. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.This work was supported by the grant of Russian Science Foundation, grant number 21-15-00026

Bone loss markers in the earliest Pacific Islanders

International audienceAbstract Kingdom of Tonga in Polynesia is one of the most obese nations where metabolic conditions, sedentary lifestyles, and poor quality diet are widespread. These factors can lead to poor musculoskeletal health. However, whether metabolic abnormalities such as osteoporosis occurred in archaeological populations of Tonga is unknown. We employed a microscopic investigation of femur samples to establish whether bone loss afflicted humans in this Pacific region approximately 3000 years ago. Histology, laser confocal microscopy, and synchrotron Fourier-transform infrared microspectroscopy were used to measure bone vascular canal densities, bone porosity, and carbonate and phosphate content of bone composition in eight samples extracted from adult Talasiu males and females dated to 2650 BP. Compared to males, samples from females had fewer vascular canals, lower carbonate and phosphate content, and higher bone porosity. Although both sexes showed evidence of trabecularised cortical bone, it was more widespread in females (35.5%) than males (15.8%). Our data suggest experiences of advanced bone resorption, possibly as a result of osteoporosis. This provides first evidence for microscopic bone loss in a sample of archaeological humans from a Pacific population widely afflicted by metabolic conditions today

Applications of Synchrotron-Source IR Spectroscopy for the Investigation of Insect Wings

Synchrotron-source infrared (IR) spectroscopy offers an effective method to characterise the chemical composition across surfaces. The intense light source allows the detection of trace quantities of different chemical components with a superior signal-to-noise ratio, while the highly collimated light enables high-resolution spatial mapping of the chemical distribution. In this chapter, we introduce synchrotron-source IR spectroscopy, using the infrared microspectroscopy (IRM) beamline at the Australian Synchrotron as an example. We then discuss the use of synchrotron-source IR spectroscopy to analyse insect wings in terms of experimental setup and a summary of the results in two different modes of operation, transmission and attenuated total reflection (ATR). Insect wings possess unique anti-wetting, self-cleaning, anti-biofouling and bactericidal properties and provide inspiration for biomimetic surfaces on synthetic materials which possess similar properties, useful in a range of industries

Development of a new approach to diagnosis of the early fluorosis forms by means of FTIR and Raman microspectroscopy

This study is aimed at investigating the features of mineralization of the enamel apatite at initial stages of fluorosis development. Samples of teeth with intact and fluorotic enamel in an early stage of the disease development (Thylstrup–Fejerskov Index = 1–3) were studied by Raman scattering and FTIR using Infrared Microspectroscopy beamline at Australian Synchrotron equipment. Based on the data obtained by optical microspectroscopy and calculation of the coefficient R [A-type/B-type], which represents the ratio of carbonation fraction of CO32−, replacing phosphate or hydroxyl radicals in the enamel apatite lattice, the features of mineralization of enamel apatite in the initial stages of development of the pathology caused by an increased content of fluorine in the oral cavity were established. Statistical analysis of the data showed significant differences in the mean values of R [A-type/B-type] ratio between the control and experimental groups for surface layers (p < 0.01). The data obtained are potentially significant as benchmarks in the development of a new approach to preventive diagnostics of the development of initial and clinically unregistered stages of human teeth fluorosis, as well as personalized control of the use of fluoride-containing caries-preventive agents. © 2020, The Author(s).This work was supported by the grant of Russian Science Foundation, Grant Number 16–15-00003

Spectroscopic signature of the pathological processes of carious dentine based on FTIR investigations of the oral biological fluids

The aim of our work is to find a spectroscopic signature of the pathological processes of carious dentine based on the investigations of the molecular composition of the oral biological fluids with the use of FTIR synchrotron techniques. This complex analysis of the obtained data shows that a number of signatures are present only in the spectra of dentine and gingival fluids from the patients developing caries of the deep dentine tissues. The detected features and complex analysis of the quantitative and qualitative data representing signatures of the development of oral cavity pathologies can enhance the quality of dental screening. © 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Synchrotron Macro ATR-FTIR Microspectroscopy for High Resolution Chemical Mapping of Single Cells

Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy has been used widely for probing the molecular properties of materials. Coupling a synchrotron infrared (IR) beam to an ATR element using a high numerical aperture (NA) microscope objective enhances the spatial resolution, relative to transmission or transflectance microspectroscopy, by a factor proportional to the refractive index (n) of the ATR element. This work presents the development of the synchrotron macro ATR-FTIR microspectroscopy at Australian Synchrotron Infrared Microspectroscopy (IRM) Beamline, and demonstrates that high quality FTIR chemical maps of single cells and tissues can be achieved at an enhanced spatial resolution. The so-called “hybrid” macro ATR-FTIR device was developed by modifying the cantilever arm of a standard Bruker macro ATR-FTIR unit to accept germanium (Ge) ATR elements with different facet sizes (i.e. 1 mm, 250 μm and 100 μm in diameter) suitable for different types of sample surfaces. We demonstrated the capability of the technique for high-resolution single cell analysis of malaria-infected red blood cells, individual neurons in a brain tissue and cellular structures of a Eucalyptus leaf. The ability to measure a range of samples from soft membranes to hard cell wall structures demonstrates the potential of the technique for high-resolution chemical mapping across a broad range of applications in biology, medicine and environmental science