Development of a Pneumatic High Speed Nakajima Testing Device

Forming limit diagrams are an essential tool for describing the formability of sheet materials in the deep-drawing process. Here, the well known and frequently employed procedures are the Nakajima and the Marciniak-Tests. Whereas these procedures' standardisation is quite advanced in the quasi-static range, numerous different test procedures exist in the range of elevated forming speeds. In the first part of this work, an overview of the various procedures is given for generating forming limit diagrams in the high speed range. In the second part, a pneumatically operated testing device is introduced which was developed at the Institute for Material Science for performing Nakajima-Tests in the high speed range. Using this device, standard specimens can be dynamically formed according to the Nakajima-Test. The testing device is to be employed for scientifically exploring the deformation mechanisms operating at very high forming speeds. The testing device’s mode of functioning is demonstrated by means of forming discs of an EN AW-6082 aluminium alloy sheet. In doing this, the testing apparatus is mainly characterised by holding the testing conditions constant during the tests: This particularly concerns the velocity of the tool for forming the sheet discs

Developing a Medical Institution Management System through Promoting Social Accountability

The paper regards the implementation of social accountability principles into the system of medical institution management as the target of research. The process of personnel management is viewed as its research subject. The paper aims to develop the system of incentives for medical institution personnel based on the principles of social accountability. The research methods and tools applied in the study are analysis of content and internal enterprise documentation, staff member interviews and statistical methods of data processing. The expected research outcome is the implementation phase of the social accountability management system resulted in the development of the Code of corporate conduct. The article advocates the view, that the Code of Conduct should be based on the diagnosis of the state of corporate culture and motivate employees of the organization. The management team of medical institution can set their own social and reasonable quality management system, which will enable it to promote and involve staff in the process of improvement

Characterization and Simulation of High-Speed-Deformation-Processes

The combination of the processes deep drawing and electromagnetic pulse forming is a promising way to cope with the ever higher complexity of new sheet metal designs. A cooperation between the Institute of Materials Science (IW) of the Leibniz Universität Hannover and the Institute of Applied Mechanics (IFAM) of the RWTH Aachen is investigating these processes both experimental and in simulation. Aim is the characterization of the combined process. Therefore the material properties of the investigated aluminum alloy EN AW 6082 T6 have to be determined quasi-static as well as at high speed. These properties are then used as a basic for the simulations. Anisotropic behaviors as well as dynamic hardening effects are investigated in the quasi-static state. Several experiments for analyzing "Bauschinger" respectively "Ratcheting effects" have been conducted resulting in a new measuring set-up for thin sheets. For the determination of high speed forming limit diagrams a novel testing device on the basis of the Nakajima-test has been developed allowing for strain rates of approximately 10^3 s^-1. Both testing methods are described in this paper; the results are then used to adapt the simulation models for the combined processes. The high speed deformation process is simulated by means of finite elements using a material model developed at the IFAM. The finite strain constitutive model combines nonlinear kinematic and isotropic hardening and is derived in a thermodynamic setting. It is based on the multiplicative split of the deformation gradient in the context of hyperelasticity. The kinematic hardening component represents a continuum extension of the classical rheological model of Armstrong-Frederick kinematic hardening which is widely adopted as capable of representing the above metal hardening effects. To prevent locking of the simulated thin sheets a new eight-node solid-shell finite element based on reduced integration with hourglass stabilization developed at IFAM has been used. With these features it was possible to simulate the Bauschinger effect obtained by the previous experiments

A Precision Measurement of pp Elastic Scattering Cross Sections at Intermediate Energies

We have measured differential cross sections for \pp elastic scattering with internal fiber targets in the recirculating beam of the proton synchrotron COSY. Measurements were made continuously during acceleration for projectile kinetic energies between 0.23 and 2.59 GeV in the angular range $30 \leq \theta_{c.m.} \leq 90$ deg. Details of the apparatus and the data analysis are given and the resulting excitation functions and angular distributions presented. The precision of each data point is typically better than 4%, and a relative normalization uncertainty of only 2.5% within an excitation function has been reached. The impact on phase shift analysis as well as upper bounds on possible resonant contributions in lower partial waves are discussed.Comment: 23 pages 29 figure

Edge and bulk effects in the Terahertz-photoconductivity of an antidot superlattice

We investigate the Terahertz(THz)-response of a square antidot superlattice by means of photoconductivity measurements using a Fourier-transform-spectrometer. We detect, spectrally resolved, the cyclotron resonance and the fundamental magnetoplasmon mode of the periodic superlattice. In the dissipative transport regime both resonances are observed in the photoresponse. In the adiabatic transport regime, at integer filling factor $\nu =2$, only the cyclotron resonance is observed. From this we infer that different mechanisms contribute to converting the absorption of THz-radiation into photoconductivity in the cyclotron and in the magnetoplasmon resonances, respectively.Comment: 15 pages, 4 figures, submitted to Phys. Rev.

Human Galectins Induce Conversion of Dermal Fibroblasts into Myofibroblasts and Production of Extracellular Matrix: Potential Application in Tissue Engineering and Wound Repair

Members of the galectin family of endogenous lectins are potent adhesion/growth-regulatory effectors. Their multi-functionality opens possibilities for their use in bioapplications. We studied whether human galectins induce the conversion of human dermal fibroblasts into myofibroblasts (MFBs) and the production of a bioactive extracellular matrix scaffold is suitable for cell culture. Testing a panel of galectins of all three subgroups, including natural and engineered variants, we detected activity for the proto-type galectin-1 and galectin-7, the chimera-type galectin-3 and the tandem-repeat-type galectin-4. The activity of galectin-1 required the integrity of the carbohydrate recognition domain. It was independent of the presence of TGF-beta 1, but it yielded an additive effect. The resulting MFBs, relevant, for example, for tumor progression, generated a matrix scaffold rich in fibronectin and galectin-1 that supported keratinocyte culture without feeder cells. Of note, keratinocytes cultured on this substratum presented a stem-like cell phenotype with small size and keratin-19 expression. In vivo in rats, galectin-1 had a positive effect on skin wound closure 21 days after surgery. In conclusion, we describe the differential potential of certain human galectins to induce the conversion of dermal fibroblasts into MFBs and the generation of a bioactive cell culture substratum. Copyright (C) 2011 S. Karger AG, Base

Methodological considerations in the analysis of fecal glucocorticoid metabolites in tufted capuchins (Cebus apella)

Analysis of fecal glucocorticoid (GC) metabolites has recently become the standard method to monitor adrenocortical activity in primates noninvasively. However, given variation in the production, metabolism, and excretion of GCs across species and even between sexes, there are no standard methods that are universally applicable. In particular, it is important to validate assays intended to measure GC production, test extraction and storage procedures, and consider the time course of GC metabolite excretion relative to the production and circulation of the native hormones. This study examines these four methodological aspects of fecal GC metabolite analysis in tufted capuchins (Cebus apella). Specifically, we conducted an adrenocorticotrophic hormone (ACTH) challenge on one male and one female capuchin to test the validity of four GC enzyme immunoassays (EIAs) and document the time course characterizing GC me- tabolite excretion in this species. In addition, we compare a common field-friendly technique for extracting fecal GC metabolites to an established laboratory extraction methodology and test for effects of storing “field extracts” for up to 1 yr. Results suggest that a corticosterone EIA is most sensitive to changes in GC production, provides reliable measures when extracted according to the field method, and measures GC metabolites which remain highly stable after even 12 mo of storage. Further, the time course of GC metabolite excretion is shorter than that described yet for any primate taxa. These results provide guidelines for studies of GCs in tufted capuchins, and underscore the importance of validating methods for fecal hormone analysis for each species of interest