Spectroscopy of Ultracold, Trapped Cesium Feshbach Molecules

We explore the rich internal structure of Cs_2 Feshbach molecules. Pure ultracold molecular samples are prepared in a CO_2-laser trap, and a multitude of weakly bound states is populated by elaborate magnetic-field ramping techniques. Our methods use different Feshbach resonances as input ports and various internal level crossings for controlled state transfer. We populate higher partial-wave states of up to eight units of rotational angular momentum (l-wave states). We investigate the molecular structure by measurements of the magnetic moments for various states. Avoided level crossings between different molecular states are characterized through the changes in magnetic moment and by a Landau-Zener tunneling method. Based on microwave spectroscopy, we present a precise measurement of the magnetic-field dependent binding energy of the weakly bound s-wave state that is responsible for the large background scattering length of Cs. This state is of particular interest because of its quantum-halo character.Comment: 15 pages, 12 figures, 4 table

Two-phonon 1- state in 112Sn observed in resonant photon scattering

Results of a photon scattering experiment on 112Sn using bremsstrahlung with an endpoint energy of E_0 = 3.8 MeV are reported. A J = 1 state at E_x = 3434(1) keV has been excited. Its decay width into the ground state amounts to Gamma_0 = 151(17) meV, making it a candidate for a [2+ x 3-]1- two-phonon state. The results for 112Sn are compared with quasiparticle-phonon model calculations as well as the systematics of the lowest-lying 1- states established in other even-mass tin isotopes. Contrary to findings in the heavier stable even-mass Sn isotopes, no 2+ states between 2 and 3.5 MeV excitation energy have been detected in the present experiment.Comment: 10 pages, including 2 figures, Phys. Rev. C, in pres

Air pollution during the 2003 European heat wave as seen by MOZAIC airliners

This study presents an analysis of both MOZAIC profiles above Frankfurt and Lagrangian dispersion model simulations for the 2003 European heat wave. The comparison of MOZAIC measurements in summer 2003 with the 11-year MOZAIC climatology reflects strong temperature anomalies (exceeding 4°C) throughout the lower troposphere. Higher positive anomalies of temperature and negative anomalies of both wind speed and relative humidity are found for the period defined here as the heat wave (2–14 August 2003), compared to the periods before (16–31 July 2003) and after (16–31 August 2003) the heat wave. In addition, Lagrangian model simulations in backward mode indicate the suppressed long-range transport in the mid- to lower troposphere and the enhanced southern origin of air masses for all tropospheric levels during the heat wave. Ozone and carbon monoxide also present strong anomalies (both ~+40 ppbv) during the heat wave, with a maximum vertical extension reaching 6 km altitude around 11 August 2003. Pollution in the planetary boundary layer (PBL) is enhanced during the day, with ozone mixing ratios two times higher than climatological values. This is due to a combination of factors, such as high temperature and radiation, stagnation of air masses and weak dry deposition, which favour the accumulation of ozone precursors and the build-up of ozone. A negligible role of a stratospheric-origin ozone tracer has been found for the lower troposphere in this study. From 29 July to 15 August 2003 forest fires burnt around 0.3×10<sup>6</sup> ha in Portugal and added to atmospheric pollution in Europe. Layers with enhanced CO and NO<sub>y</sub> mixing ratios, advected from Portugal, were crossed by the MOZAIC aircraft in the free troposphere over Frankfurt. A series of forward and backward Lagrangian model simulations have been performed to investigate the origin of anomalies during the whole heat wave. European anthropogenic emissions present the strongest contribution to the measured CO levels in the lower troposphere (near 30%). This source is followed by Portuguese forest fires which affect the lower troposphere after 6 August 2003 and even the PBL around 10 August 2003. The averaged biomass burning contribution reaches 35% during the affected period. Anthropogenic CO of North American origin only marginally influences CO levels over Europe during that period

Angle-resolved photoemission and first-principles electronic structure of single-crystalline α\alpha-uranium (001)

Continuing the photoemission study begun with the work of Opeil et al. [Phys. Rev. B \textbf{73}, 165109 (2006)], in this paper we report results of an angle-resolved photoemission spectroscopy (ARPES) study performed on a high-quality single-crystal $\alpha$-uranium at 173 K. The absence of surface-reconstruction effects is verified using X-ray Laue and low-energy electron diffraction (LEED) patterns. We compare the ARPES intensity map with first-principles band structure calculations using a generalized gradient approximation (GGA) and we find good correlations with the calculated dispersion of the electronic bands

Heat transfer between a nano-tip and a surface

We study quasi-ballistic heat transfer through air between a hot nanometer-scale tip and a sample. The hot tip/surface configuration is widely used to perform nonintrusive confined heating. Using a Monte-Carlo simulation, we find that the thermal conductance reaches 0.8 MW.m-2K-1 on the surface under the tip and show the shape of the heat flux density distribution (nanometer-scale thermal spot). These results show that a surface can be efficiently heated locally without contact. The temporal resolution of the heat transfer is a few tens of picoseconds.Comment: 4 page

Proteomics as a quality control tool of pharmaceutical probiotic bacterial lysate products

Probiotic bacteria have a wide range of applications in veterinary and human therapeutics. Inactivated probiotics are complex samples and quality control (QC) should measure as many molecular features as possible. Capillary electrophoresis coupled to mass spectrometry (CE/MS) has been used as a multidimensional and high throughput method for the identification and validation of biomarkers of disease in complex biological samples such as biofluids. In this study we evaluate the suitability of CE/MS to measure the consistency of different lots of the probiotic formulation Pro-Symbioflor which is a bacterial lysate of heat-inactivated Escherichia coli and Enterococcus faecalis. Over 5000 peptides were detected by CE/MS in 5 different lots of the bacterial lysate and in a sample of culture medium. 71 to 75% of the total peptide content was identical in all lots. This percentage increased to 87–89% when allowing the absence of a peptide in one of the 5 samples. These results, based on over 2000 peptides, suggest high similarity of the 5 different lots. Sequence analysis identified peptides of both E. coli and E. faecalis and peptides originating from the culture medium, thus confirming the presence of the strains in the formulation. Ontology analysis suggested that the majority of the peptides identified for E. coli originated from the cell membrane or the fimbrium, while peptides identified for E. faecalis were enriched for peptides originating from the cytoplasm. The bacterial lysate peptides as a whole are recognised as highly conserved molecular patterns by the innate immune system as microbe associated molecular pattern (MAMP). Sequence analysis also identified the presence of soybean, yeast and casein protein fragments that are part of the formulation of the culture medium. In conclusion CE/MS seems an appropriate QC tool to analyze complex biological products such as inactivated probiotic formulations and allows determining the similarity between lots

Power-Based Droop Control in DC Microgrids Enabling Seamless Disconnection From Upstream Grids

This paper proposes a local power-based droop controller for distributed energy resource converters in dc microgrids that are connected to upstream grids by grid-interface converters. During normal operation, the grid-interface converter imposes the microgrid bus voltage, and the proposed controller allows power flow regulation at distributed energy resource converters\u2019 output. On the other hand, during abnormal operation of the grid-interface converter (e.g., due to faults in the upstream grid), the proposed controller allows bus voltage regulation by droop control. Notably, the controller can autonomously convert from power flow control to droop control, without any need of bus voltage variation detection schemes or communication with other microgrid components, which enables seamless transitions between these two modes of operation. Considering distributed energy resource converters employing the power-based droop control, the operation modes of a single converter and of the whole microgrid are defined and investigated herein. The controller design is also introduced. Furthermore, the power sharing performance of this control approach is analyzed and compared with that of classical droop control. The experimental results from a laboratory-scale dc microgrid prototype are reported to show the final performances of the proposed power-based droop control

Precision study of 6p 2Pj - 8s 2S1/2 relative transition matrix elements in atomic Cs

A combined experimental and theoretical study of transition matrix elements of the 6p 2Pj - 8s 2S1/2 transition in atomic Cs is reported. Measurements of the polarization-dependent two-photon excitation spectrum associated with the transition were made in an approximately 200 cm-1 range on the low frequency side of the 6s 2S1/2 - 6p 2P3/2 resonance. The measurements depend parametrically on the relative transition matrix elements, but also are sensitive to far-off-resonance 6s 2S1/2 - np 2Pj - 8s 2S1/2 transitions. In the past, this dependence has yielded a generalized sum rule, the value of which is dependent on sums of relative two-photon transition matrix elements. In the present case, best available determinations from other experiments are combined with theoretical matrix elements to extract the ratio of transition matrix elements for the 6p 2Pj - 8s 2S1/2 (j = 1/2,3/2) transition. The resulting experimental value of 1.423(2) is in excellent agreement with the theoretical value, calculated using a relativistic all-order method, of 1.425(2)