125 research outputs found

    Cumulative ultraviolet radiation flux in adulthood and risk of incident skin cancers in women

    Get PDF
    Background: Solar ultraviolet (UV) exposure estimated based on residential history has been used as a sun exposure indicator in previous case–control and descriptive studies. However, the associations of cumulative UV exposure based on residential history with different skin cancers, including melanoma, squamous cell carcinoma (SCC), and basal cell carcinoma (BCC), have not been evaluated simultaneously in prospective studies. Methods: We conducted a cohort study among 108 578 women in the Nurses' Health Study (1976–2006) to evaluate the relative risks of skin cancers with cumulative UV flux based on residential history in adulthood. Results: Risk of SCC and BCC was significantly lower for women in lower quintiles vs the highest quintile of cumulative UV flux (both P for trend <0.0001). The association between cumulative UV flux and risk of melanoma did not reach statistical significance. However, risk of melanoma appeared to be lower among women in lower quintiles vs the highest quintile of cumulative UV flux in lag analyses with 2–10 years between exposure and outcome. The multivariable-adjusted hazard ratios per 200 × 10−4 Robertson–Berger units increase in cumulative UV flux were 0.979 (95% confidence interval (CI): 0.933, 1.028) for melanoma, 1.072 (95% CI: 1.041, 1.103) for SCC, and 1.043 (95% CI: 1.034, 1.052) for BCC. Conclusions: Associations with cumulative UV exposure in adulthood among women differed for melanoma, SCC, and BCC, suggesting a potential variable role of UV radiation in adulthood in the carcinogenesis of the three major skin cancers

    Temporal resolution deficits in the visual fields of MS patients

    Get PDF
    AbstractWe assessed the relationship between temporal resolution and MS-induced neuropathy. A diagnostic strategy comprising assessments of temporal resolution at 16 points in the extra-foveal visual field up to 12° from the fovea was first compared with foveal temporal resolution and with a standard VEP procedure in the same MS patients. At the group level, foveal temporal resolution was less sensitive to demyelination than the 16-point diagnostic strategy, the detection rate of which was comparable to that of the VEP procedure. Cross-sensitivity of the VEP and the 16-point diagnostic procedure was low. Subsequently, the average severity of MS-induced temporal resolution deficits was studied at three retinal loci of the same size but different eccentricities. Foveal deficits were not significantly greater than more peripheral deficits within the central 12°

    A Systematic Review and Meta-Analysis to Inform Cancer Screening Guidelines in Idiopathic Inflammatory Myopathies

    Get PDF
    OBJECTIVES: To identify clinical factors associated with cancer risk in the idiopathic inflammatory myopathies (IIMs) and to systematically review the existing evidence related to cancer screening. METHODS: A systematic literature search was carried out on Medline, Embase and Scopus. Cancer risk within the IIM population (i.e. not compared to the general population) was expressed as risk ratios (RR) for binary variables and weighted mean differences (WMD) for continuous variables. Evidence relating to cancer screening practices in the IIMs were synthesised via narrative review. RESULTS: Sixty nine studies were included in the meta-analysis. Dermatomyositis subtype (RR 2.21), older age (WMD 11.19), male gender (RR 1.53), dysphagia (RR 2.09), cutaneous ulceration (RR 2.73), and anti-transcriptional intermediary factor-1 gamma positivity (RR 4.66) were identified as being associated with significantly increased risk of cancer. Polymyositis (RR 0.49) and clinically amyopathic dermatomyositis (RR 0.44) subtypes, Raynaud's phenomenon (RR 0.61), interstitial lung disease (RR 0.49), very high serum creatine kinase (WMD -1189.96) or lactate dehydrogenase (WMD -336.52) levels, and anti-Jo1 (RR 0.45) or anti-EJ (RR 0.17) positivity were identified as being associated with significantly reduced risk of cancer. Nine studies relating to IIM-specific cancer screening were included. Computed tomography (CT) scanning of the thorax, abdomen and pelvis appeared to be effective in identifying underlying asymptomatic cancers. DISCUSSION: Cancer risk factors should be evaluated in patients with IIM for risk stratification. Screening evidence is limited but CT scanning could be useful. Prospective studies and consensus guidelines are needed to establish cancer screening strategies in IIM patients

    Roles of pathway-based models and their contribution to the redesign of health-care systems

    Get PDF
    Care pathways provide a practical analytical tool that encompasses both organizational efficiency and individual patients'care. In the UK, constructing the care pathway has been a recommended starting point for the re-design of health-caresystems. This paper examines the re-design cycle for health-care systems and looks at the role of pathway-basedmodels in the design and operation phases of the cycle. In addition, the models provide further benefits for communicatingrecommended practice and audit of care and outcomes. The models span the classic care pathway with extensions tosimulation modelling. An example of the use of care pathways in the re-design of an emergency department is used forillustration. This study shows the role of pathway models as: a tool for re-design, a catalyst for enhancing communicationand as a repository for audit information. The final role of a tool for modelling contingencies was not implemented. Fromthe example it can be concluded that sophisticated models can be useful, in some applications; however, the simplerapproaches may often be the best, offering rapid, transparent recommendations based on a multidisciplinary approach

    Bone Tissue Response to Porous and Functionalized Titanium and Silica Based Coatings

    Get PDF
    Background: Topography and presence of bio-mimetic coatings are known to improve osseointegration. The objective of this study was to evaluate the bone regeneration potential of porous and osteogenic coatings. Methodology: Six-implants [Control (CTR); porous titanium coatings (T1, T2); thickened titanium (Ti) dioxide layer (TiO2); Amorphous Microporous Silica (AMS) and Bio-active Glass (BAG)] were implanted randomly in tibiae of 20-New Zealand white rabbits. The animals were sacrificed after 2 or 4 weeks. The samples were analyzed histologically and histomorphometrically. In the initial bone-free areas (bone regeneration areas (BRAs)), the bone area fraction (BAF) was evaluated in the whole cavity (500 mm, BAF-500), in the implant vicinity (100 mm, BAF-100) and further away (100–500 mm, BAF-400) from the implant. Bone-to-implant contact (BIC-BAA) was measured in the areas where the implants were installed in contact to the host bone (bone adaptation areas (BAAs)) to understand and compare the bone adaptation. Mixed models were used for statistical analysis. Principal Findings: After 2 weeks, the differences in BAF-500 for different surfaces were not significant (p.0.05). After 4 weeks, a higher BAF-500 was observed for BAG than CTR. BAF-100 for AMS was higher than BAG and BAF-400 for BAG was higher than CTR and AMS. For T1 and AMS, the bone regeneration was faster in the 100-mm compared to the 400-mm zone. BIC-BAA for AMS and BAG was lower after 4 than 2 weeks. After 4 weeks, BIC-BAA for BAG was lower than AMS and CTR. Conclusions: BAG is highly osteogenic at a distance from the implant. The porous titanium coatings didn’t stimulate bone regeneration but allowed bone growth into the pores. Although AMS didn’t stimulate higher bone response, it has a potential of faster bone growth in the vicinity compared to further away from the surface. BIC-BAA data were inconclusive to understand the bone adaptation.status: publishe

    Social isolation causes downregulation of immune and stress response genes and behavioural changes in a social insect

    No full text
    Humans and other social mammals experience isolation from their group as stressful, triggering behavioural and physiological anomalies that reduce fitness. While social isolation has been intensely studied in social mammals, it is less clear how social insects, which evolved sociality independently, respond to isolation. Here we examined whether the typical mammalian responses to social isolation, e.g., an impaired ability to interact socially and immune suppression are also found in social insects. We studied the consequences of social isolation on behaviour and brain gene expression in the ant Temnothorax nylanderi. Following isolation, workers interacted moderately less with adult nestmates, increased the duration of brood contact, and reduced the time spent self-grooming, an important sanitary behaviour. Our brain transcriptome analysis revealed that only a few behaviour-related genes had altered their expression with isolation time. Rather, many genes linked to immune system functioning and stress response had been downregulated. This probably sensitizes isolated individuals to various stressors, in particular because isolated workers exhibit reduced sanitary behaviour. We provide evidence of the diverse consequences of social isolation in social insects, some of which resemble those found in social mammals, suggesting a general link between social well-being, stress tolerance, and immune competence in social animals

    The development of Zirconia and Copper toughened Alumina ceramic insert

    Get PDF
    Ceramic cutting tools have been utilized in industry for over a century for its productivity and efficiency in machine tools and cutting tool material. However, due to the brittleness property the application has been limited. In order to manufacture high strength ceramic cutting tools, there is a need for suitable reinforcement to improve its toughness. In this case, copper (Cu) and zirconia (ZrO2) powders were added to investigate the hardness and physical properties of the developed composite insert. A uniaxial pre-forming process of the mix powder was done prior to densification by sintering at 1000 and 1300°C. The effect of the composition of the reinforcement on the hardness, density, shrinkage and microstructure of the inserts was investigated. It was found that an optimum density of 3.26 % and hardness 1385HV was obtained for composite of 10wt % zirconia and 10wt% copper at temperature 1000 °C
    corecore